Reviews Rf Signal Analyzer Software

Toolso Digital Satellite Finder Satellite Signal Finder Satellite Signal Meter TV Antenna Satellite Signal Finder Meter with Compass

  • Fully DVB-S2X/S2/S/T2/T/C, MPEG-2/MPEG-4 compliant. Supports H.264/H.265(10 Bit) Hardware decoding. Digital measuring device for signal strength and quality. Supports presetting all satellite information..
  • V8 Finder pro satellite finder equipped with a 4.3 Inch high definition TFT LCD screen, which supports real-time power display, with low power reminder..
  • The V8 finder pro sat finder provides all the functions needed to install and verify digital satellite TV services. It integrates the functions of Spectrum analyzer, compass and Sound for Locking Signal..
  • Speaker Integrated, supports sound for locking signal. V8 Finder pro satellite detect device supports Loop Search and scan of Auto, Blind, Manual or NIT. It can auto calculate angle of AZ,EL. With LNB short-circuit protection to protect the tuner from damage..
  • Support networking via USB WIFI and software upgrade via USB port. Supports Youtube for USB wifi 2.4G..
  • GT MEDIA official shop offers high quality original products and professional technical support. If you have any questions, please don't hesitate to contact us via Amazon email..
Check Stock

MFJ-259D MFJ259D Original MFJ Enterprises Antenna Analyzer VHF/220 MHz 100-160 KHz 280-520 KHz .53-230 MHz - Replaces MFJ-259C

  • ame great performance as the popular MFJ-259C, but with two additional frequency ranges (100-160KHz and 280-520KHz).
  • Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information. Super easy to use! Just set the bandswitch and....
  • Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D (not included).
  • Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll....
  • Complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and....
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

Tripp Lite Keyspan ER-V2 RF Remote Control for Windows 7 & Vista

  • Controls media center TV, music, videos and photos..
  • RF signal works up to 60 ft through walls and furniture on a 2.4 GHZ frequency..
  • Allows you to locate the PC in an AV cabinet or closet.
  • No software to install — works within seconds.
Check Stock

HDMI to RF Coaxial Converter Box, 1080P Video Adapter Support Input HDMI Resolution: 480I/480P/576I/576P/720P/720I/1080I/1080P(US Plug)

  • 【HDMI to RF Converter】The RF converter can easily help you convert HDMI signal to RF signal, easy to use. HDMI to Coaxial Cable Adapter for TV. With the remote control, you can adjust the output screen and amplitude including brightness, contrast, and chroma..
  • 【HDMI Source Devices to Your Old TVs】Display DVD/game/set top box (HAMI signal source device) on normal or old TV, long distance signal transmission via coaxial cable. The converter outputs an analog signal instead of ATSC format..
  • 【How to Use it】The output TV/RF signal frequency is 61.25MHZ. Please use the search channel function of the TV to get the signal, then press "SYS" to adjust the format (PAL or NTSC) and correspond to the TV until you get clear picture and sound..
  • 【Note】The output image quality will be lower than the RF analog signal (more like 480p). This device cannot work in reverse. Support input HDMI resolution:480I/480P/576I/576P/720P/720I/1080I/1080P..
  • 【After Sales Service】If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

JUSHENG GTMEDIA V8 Finder 02 Digital Satellite DVB-S/S2/S2X MPEG-2/4 H.264(8 Bit) TV Signal Finder HD High 3.5\ LCD Satellite Finder MPEG-2 MPEG-4 Freesat FTA LNB Signal Meter Satellite TV Receiver

  • ● 3.5 Inch High Definition LCD Screen, ● Fully DVB-S2X/S2/S, MPEG-2/MPEG-4 compliant ● Support H.264 (8 Bit) Hardware decoding ● Digital measuring device for signal strength and quality.Supports presetting all satellite information.
  • ● Support Loop Search ● Constellation analyzer ● Spectrum analyzer ● Supports scan of Auto, Blind, Manual or NIT ● Sound for Locking Signal.
  • ● Auto Calculate Angle of AZ,EL ● Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone ● Speaker Integrated ● Support both AV out and AV in ● Support both HDMI out ● Support real-time power display, with low power reminder ● Supports Youtube for USB wifi 2.4G.
  • ● LNB short protect ● 3.7V/5000mAh Li-ion Battery Included ● Support Type-C charging interface, support multi-protocol fast charging, max 18W ● Support TypeC reverse charging ● Software upgrade via USB port ● Easy to carry.
  • Specifications TRANSMISSION STANDARDS DVB-S2X/S2/S,MPEG-2,MPEG-4,H.264(8 Bit) Supports softcam: Fastest BISS auto roll, PowerVu auto roll Support CCM,VCM, ACM, multi-stream, T2-MI, Single/Multi-PLP.
Check Stock

4 Pack 3DHeaven Rechargeable 3D Glasses Compatible with EPSON ELPGS03 3-D Glasses

  • [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen

  • [2022 Upgraded Version: ESD Protection Diodes] Produced by Hugen, portable spectrum analyzer with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
  • [Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectru....
Check Stock