Reviews Rf Receiving Module

11J28-06881 - Upgraded Replacement for Beacon-Morris Direct Spark Ignition Control Board

  • The Honeywell Home PROTAKEOVER is a module add-on for the Honeywell Home PROA7PLUS Alarm Panel. By installing this module, your PROA7PLUS will be able to support one of several legacy RF sensor lineups. You can pick between Honeywell 5800, 2GIG 345 MHz, 433 MHz, 319.5 MHz, and Bosch Sensors..
  • Once the PROTAKEOVER Module has been installed, it will replace the existing back plate for the PROA7PLUS Panel. The PROTAKEOVER serves as the back plate, as it also provides an antenna for communicating with the legacy sensors..
Check Stock

Smart RF Relay Switch eMylo Wireless Remote Control Switch DC 12V One Channel Momentary Module 433Mhz Relay Receiver with Two Transmitters

  • ♥ RF Remote Control Switch: lamps or other household electric appliances are controllable using the remote control, which features long control distance, sensitivity, high anti-interference performance and stability..
  • ♥Excellent stability--The relay module provides high signal sensitivity at lower cost and resist interference.
  • ♥Strong signal--eMylo RF relay switch can pass through walls, floors and doors, control receiver from any place within a reliable distance.
  • ♥ More Flexibility & Widely Application: eMylo RF Relay Switch adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
  • ♥Easy to set up:The programmable RF receiver and transmitter can be flexibly configured in quantity and in operating modes..
Check Stock

Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One S Slim

  • Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One slim.
  • Tips: This is replacement to replace your old damage Power Eject Bind RF IR LED Light Bluetooth Board, don't include instructions, please install it....
  • Broken your Power Eject Bind RF IR LED Light Bluetooth Board ? don't need to change new device, just buy this item and replace your damage Power Eject....
  • Compatible with: Microsoft Xbox One Slim (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Maikrt Embedded QR Code Scanning Module USB and UART Serial Port Barcode Scanner Identification Module Bar Code Reader for Access Control, Locker Scan Code Payment etc

  • A small 1D/2D codes reader,Can be embedded in any device for scanning code to identify other items, by using the intelligent image recognition algorithm.Configurable via scanning 'configuration code',Module matching light source, Can work in the dark..
  • Embedded QR code scanning module is used for access control, channel gate, locker, scan code payment, etc. And other industry equipment to achieve smart project,The performance is stable and the decoding speed is very fast..
  • 2D/QR code scanning module support linux,Android, windows and other systems, Can easily capture bar codes 1D, 2D on labels, paper, and mobile phone or computer displays,Sensitive and accurately..
  • USB and TTL dual interface, equipped with 9pin terminal line and USB cable, which is convenient for you to convert between UART TTL serial port and USB interface. No need to worry about the use of interface types..
  • After receiving our products, connect to the line, after power-on That can scan the code.
  • The module scans the code directly and sends the result to your host computer automatically. After receiving the data, the host computer can proceed to the next step..
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

IR/RF Replacement Remote Control Fit for Directv RC71 RC72 RC73

  • IR/RF Replacement IR/RF Remote Control Fit for Directv RC71 RC72 RC73 D10 D11 D12 h20 H21 H23 H24 H25 HR20 THR22 TiVo R15.
  • Uses both infrared (IR) and radio frequency (RF) technology.
  • No Set up or Programming Required, Just Put New AA Batteries ( Not Include ) and It Can Perform Well, It Covers All the Functions of the Original Remote. The Best Choice for Your Damaged or Lost Remote..
  • Upgrade Chip, Durable Lifespan, High Quality and Stable Performance with One Year Warranty. If You Have Any Questions after Receiving the Remote Control, Please Contact us, We will Provide You with Timely and High- Quality Service..
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
  • -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability..
Check Stock