Reviews Resistivity Sensor

MG Chemicals - 846-80G Carbon Conductive Grease, 80g Tube

• Improves electrical connections between irregular or pitted surfaces and ensures electrical contact between loose or vibrating parts.
• Prevents arching, pitting, hotspots, and welds.
• Wide service temperature range of -68°C to 200°C.
• Designed to lubricate, For a non-bleeding / non-migrating electrically conductive grease, see our 847-25ML Carbon Conductive Assembly Paste..

LEISHENT Pure Nickel Plate Sheet Foil 0.2Mm X 200Mm X 1000Mm

• With strong high temperature resistance,With well antioxidant activity..
• Use for a variety of resistance to alkali equipment,Used to make permanent magnetic material..
• Used in electroplating and catalyst, etc.
• Features in good welding performance, high tensile tension, low resistivity..

HORIBA 100-7 pH 7 Standard Solution +/- 0.02 pH (pH 6.8 at 25° C) - 500mL Bottle, Made in Japan

• Description: conductivity calibration standard, 100,000 µS.

Roll OD 20mm x ID 18mm x 1000mm Length 3K Carbon Fiber Tube Multi-Copter ARM

ChemWorld Type I Deionized Water - 20 Liter cubitainer

• This water is considered Type I water. Ultraviolet (UV) sterilized. Resistivity max is 003c 5 mega ohms..
• Purity: 003c 20 uS/cm. Purity: 003e 18 Megaohm- cm. Filtration: 0.2 um. Free Chlorine: 003c 0.05 ppm.
• Silica: 003c 2 ppm. TOC: 003c 50 ppb. Microorganisms: 003c 10 CFU / 1000 ml..
• Chlorides: 003c 1 ppb. Sodium: 003c 1 ppb. With 0.05 micron UF-Endotoxin: 003c 0.03 EU..
• With Combination UV / TOC Destruction TOC 003c 3 ppb. Commonly used as reagent grade water..

Silver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-Duct 904, 2.5gm Syringe

• Viscosity 200,000 Cp, Shelf Life 4 months At 25 °C 6 months refrigerated.
• Mechanical Properties Hardness, Shore D 83, Appearance Silver.
• Operating Temperature Up to 325 °C, Cure Type Heat cure.
• Cure Time 30 minutes At 175 °C, 1 hour At 150 °C, 2 hours At 125 °C.

MG Chemicals - 841AR-340G 841AR Super Shield Nickel Conductive Paint, 12 oz Aerosol

• Provides effective EMI/RFI shielding over a broad frequency range.
• Quick dry time, no heat cure required, easy to apply.
• Strong adhesion to acrylic, abs, polycarbonate, and other injection molded plastics.
• does not contain toluene, xylene, or MEK.

ACL Staticide 6002 Mat and Table Top Cleaner, 1 Gallon Container

• A multi-purpose neutral cleaner that is designed for production areas including static control stations.
• Maintains the original resistivity of anti-static mats.
• It is the ideal cleaner for areas in which static-sensitive devices are assembled, tested and handled.
• Meets or exceeds Mil 81705 and NFPA 56A with an electrostatic decay time of 0.1 second according to Federal Test Method 4046.

Elga VISION250 Wall Mounted Deionizer System, 003e1 Megohm-cm Resistivity, 60 LPH

• For use with general laboratory and manufacturing applications requiring up to 60 liters per hour (LPH) of pure water.
• Deionizing cartridge for greater than 1 megohm-cm resistivity.
• Color-change indicator for monitoring water quality.