Reviews Reset Pin

for Ducati 4 pin Male to OBD2 Female obdii Diagnostic Adapter Connector for Ducati Panigale Motorbikes

Compatibility: Compatible with all Ducati motorcycles equipped with a 4-pin port, compatible with Can protocol.
Works with for MultiTool Lite Android Software and features as stated by software authors..
When work with other obd scan tool (can protocol), support to reset Check Engine Light, Read Live Data - RPM, Speed, temperatures, O2 sensor data, voltages, emissions values & much more.
Will NOT cover ABS or SRS (unless specified by the software).
for Ducati 4 pin CAN Adaptor for DDA Ducati diagnostics.

This is a caution when changing the number. When changing the number, you must change the password while holding down the Shackle. If you do not change the password while pressing Shackle, the password will be lost and the lock will not open..
Security of the dial lock : 10,000 combinations of locking mechanisms are provided to ensure safety. Most of the locks can be easily opened with an internal structure with only one security pin under the dial, but ZARKER applies 4 security pins to provide protection and security from theft..
Combination reset function : Vertically-aligned combination setting allows for convenient use even in a narrow space. Vertically-aligned 4-digit reset: The design of a vertically-aligned 4-digit reset makes both setting and resetting with a desired combination easy, so an additional tool is not needed to change the combination..
Wide range of use : It is ideal to use for simple purposes such as school lockers, sports lockers, fences, and tool boxes..
Materials : Zinc alloy and plated steel keep your belongings safe with durability..

Wide range of chip 15000+ support, support for serial and parallel series 40/44/48PIN large capacity FLASH.
Unique serial ICSP interface. supporting the serial download and high-speed parallel high voltage programming.
Best internal 40 pin over voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
Original chip encryptionoperation on AVR microcontroller with internal RC Calibration byte. The Decrypt software can not be directly run on another same type of chip.
Support simultaneously burn with 4 Programmers each computer.

The logo on the left epoxy sticker on the front of the lock has been changed to an engraved logo. We have upgraded the epoxy logo sticker to the engraved logo to compensate for its weak adhesion if used for a long time..
Security of the dial lock : 1,000 combinations of locking mechanisms are provided to ensure safety. Most of the locks can be easily opened with an internal structure with only one security pin under the dial, but ZARKER applies 4 security pins to provide protection and security from theft..
Combination reset function: Vertically-aligned combination setting allows for convenient use even in a narrow space. Vertically-aligned 3-digit reset : The design of a vertically-aligned 3-digit reset makes both setting and resetting with a desired combination easy, so an additional tool is not needed to change the combination..
Wide range of use: It is ideal to use for simple purposes such as school lockers, sports lockers, cabinet lockers, fences, and tool boxes..
Materials : Zinc alloy and plated steel keep your belongings safe with durability..

The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).

Price For: Each Supply Voltage Range: 12V DC Time Min: 0.1s Time Max: 600h Power Consumption: 1.6W Reset Time: 100ms Mounting Type: 8-pin Supply Voltage Max: 12VDC Switch Function: Delayed DPDT Type: Multi-Mode.

Price For: Each Time Min: 0.1s Time Max: 600h Power Consumption: 11.6VA Reset Time: 100ms Mounting Type: 11-pin Supply Voltage: 240VAC Supply Voltage Max: 240VAC Supply Voltage Min: 100VAC Type: Multi-Mode.

Price For: Each Supply Voltage Range: 24V AC, 24V DC Time Min: 0.1s Time Max: 600h Power Consumption: 3.5VA Reset Time: 100ms Leaded Process Compatible: No Mounting Type: 11-pin Supply Voltage Max: 24V RoHS Compliant: No.