Aube by Honeywell TH140-28-01-B/U Hydronic Heating 7-Day Programmable Thermostat
- Compatible with hydronic floor heating and central heating.
- also compatible with electric heat applications using a relay (see accessories).
- 5-Ampere (resistive) 24-Volt, 120-Volt, 240-Volt R, W.
- Millivolt compatible, SPDT dry contact relay output.
- Remote input enables change of temperature modes by phone (Telephone controller required – Aube by Honeywell CT240).
- Low battery indicator gives 60-day warning to replace battery (2 ‘AA’ batteries required).
- Dimensions (height by width by depth): 4.9-Inch by 3.8-Inch by 1-Inch.
Check Stock
Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed
- ❤❤【US ETL Certificate Listed 】ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W..
- ❤❤【Main Functions]】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- ❤❤【Dual Temperature Sensor]】Temperature sensors are waterproof and the temperature control range is -40~212°F (-40~100°C)..
- ❤❤【Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output】ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller..
- ❤❤【Multipurpose Usage】 Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W..
Check Stock
KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile
- 【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
- 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
- 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
- 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
- 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.
Check StockWireless Z-Wave Multi-Input/Output Dry Contact Bridge Cert ID ZC08-16040002
- BEFORE YOU BUY: Check to make sure your home automation controller / security panel is interoperable with our device. NOT ALL Z-wave Controllers are....
- One 24VDC / 110 VAC Relay to control any low voltage device via Z-wave. Controls garage doors, motorized shades, gates, solenoid valves, etc. Relay....
- One SIGNAL Input terminal block to receive low voltage (digital, analog, or pulse) signals via Z-wave. Use with reed sensors, contact sensors, door....
- 9V AC power adaptor included. Low voltage wire is NOT included.
- Please visit our website and youtube page for application details and how-to video's. Wiring diagrams are also downloadable on our website product....
Check StockVikye Driver Module, 4 in 1 MAX7219 LED Dot Matrix Display Driver Module, Professional MCU Controller DIY Kit
- EASY OPERATION: The industrial remote control is 12 button design, which is easy to operate, has complete functions, which is simple and practical..
- RELAY LOAD: The maximum load capacity of the relay is 1-110V 5A DC, 85-265V 6A AC, suitable for more industrial control applications..
- 8 WORKING MODES: The controller has modes including instantaneous, self locking, interlocking, self locking and instantaneous coexistence..
- HIGH SENSITIVITY: Remote control distance in open space reaches 300‑500 meter, +20dBm wireless transmission power, high receiving sensitivity..
- GOOD ADAPTABILITY: The rolling code coding and decoding type (similar to HCS301) can adapt to up to 32 remote controllers, stable and reliable..
Check Stock
Dixell XR02CX-5N0C1 230V/50-60Hz Digital Thermostat Controller Defrost Programmable-Commercial for Fridges Freezers Heating Appliances
- XR02CX-5N0C1,in 32x74x50 mm short format,is a digital controller with off cycle defrost designed for refrigeration applications at normal temperature.It provides a relay output to drive the compressor. It is also provided with 1 NTC probe input and one the digital input. The instrument is fully configurable through special parameters that can be easily programmed through the keyboard or by the HOTKEY..
- Suitable for appliances including:FRIDGES,FREEZERS,HEATING APPLIANCES.230V/50-60Hz.
- SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
- In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and ....
Check Stock
eMylo Smart RF Motor Controller Switch Relay Wireless Remote Control Switch 12V Motor Switch 433Mhz for Rolling Door, Electric Curtains/Locks, Water Pump, DC 5V-24V with 2 Transmitters （1 Pack）
- ★ Motor wireless remote control switch: It is specially designed for motor. Two-channel design capable can control the forward, reverse and stop of the motor, and with long control distance..
- ★ Technology Upgrade: the transmitters and receivers adopt non-directional wireless encoding technology, allowing independent control, without mutual interference, High-performance "TUYA "chip module, which stable performance, sensitivity..
- ★ Easy Installation: Using the Special jointing clamp to connect the motor and wireless relay in one minute. No need any tools. Avoid opening the box during installation and ensure firm connection and safe operation..
- ★ Stability & Safty: The relay module is with signal sensitivity and resist interference. RF motor controller can pass through walls, floors and doors to control receiver within the valid range. Made of the ABS material and flame retardant material, overvoltage protection and fire protection, safer..
- ★ Widely Application: Structural upgrading eMylo motor driver reversing controller switch allowing independent control without mutual interference. Commonly used in rolling doors, electric curtains, electric door locks ,water pump and other motor machines. Start your smart life now..
Check Stock
Dixell XR03CX-5N0C1 230V/50-60Hz Digital Thermostat Controller Auxiliary Relay Programmable-Commercial for Refrigerating Units
- It is microprocessor based controller suitable for applications on normal temperature refrigerating units. It provides two relay output:one for compressor and the other one for alarm signalling or as auxiliary output. It provides an NTC probe input and a digital input for alarm signalling, for switching the auxiliary output or for start defrost.The instrument is fully configurable through special parameters that can be easily programmed through the keyboard or the by HOTKEY..
- Suitable for appliances including:suitable for applications on normal temperature refrigerating units.230V/50-60Hz.
- Defrost is performed through a simple stop of the compressor.Parameter id controls the interval between defrost cycles, while its length is controlled by parameter Md..
- SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
- In case of failure or faulty operation send the ....
Check StockCNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink
- ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
- ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
- ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
- ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
- ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Check Stock 
