Reviews Refuse Collector Hose

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

Dust Right 2.5'' Shop Vac Hose Kit – Expandable Blue Shop Vac – 2-1/2” Elastic, Flexible Polymer Vacuum Hose Extend up to 12’ L – Kit Includes 2.5” Expandable Hose, 2-1/2 Hose Clamp, Swivel Fittings

  • 2-1/2” Blue Shop Vacuum Hose Extension Kit: This incredibly stretchy 2-1/2'' dust vacuum hose extends up to 12 ft. in length, then collapses back into a compact 2 ft. stack for storage. The dust collector hose weighs 30% less than previous versions and is offered in a blue translucent color..
  • Helps To Prevent Tangling & Tripping: This dust collection hose allows you to reach most areas of your shop, without the hassle of a long, cumbersome hose. As you move closer to your shop vacuum, it retracts to take up excess slack, which helps prevent tangling and tripping..
  • Fits In Standard Shop Vac: With the two included swivel fittings, our dust collection hose can easily connect to your shop vacuum, optional dust right accessories, and many dust ports..
  • Durable Material: The shop vac hose is made of an amazingly elastic, flexible polymer which you can apply for a long time and stretches from approximately 2' to 12' in length..
  • What’s Included? This dust collection hose with fittings kit includes (1) Dust Right 2-1/2'' Diameter. Shop Vac Extension Hose (expands from 2' to 12'), (2) 2-1/2 Hose Clamps, and (2) Swivel fittings..
Check Stock

JET 708626CK DC-1100CK 1-1/2-Horsepower 1,100 CFM Canister Dust Collector 115/230-Volt 1-Phase

  • Handy clear plastic collection bag for easier disposal than cloth.
  • Includes canister filter, hardware, manual, hose.
  • 12,052-square inch filtering surface area.
Check Stock

Taytools 467108 Wall Mounted Bracket/Hanger for 4 Inch Dust Collector Hose, Fittings or PVC. Range 3-1/2 to 5 Inches Diameter, Spring Loaded, Set of 4

  • Mount these brackets to any surface to hold 4” dust collector hose, 4” dust collector fittings or 4” PVC pipe. Spring-loaded action allows easy attachment and removal..
  • Clamping range from 3-1/2” to 5” diameter.
Check Stock

4 Inch x 10 Feet Dust Collection Hose - Flexible Clear PVC Heavy Duty Puncture Resistant Dust Debris Fume Hoses - Reinforced With Coated Wire Helix

  • 4'' x 10' puncture resistant, heavy-duty hose (no collapse, tear or kink), Includes 2 stainless steel key hose clamps.
  • Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system.
  • Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.
  • Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired.
  • 100% Satisfaction guaranteed - 30-day no questions return policy + 12-month warranty.
Check Stock

4\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...s a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in....
Check Stock

4 x 50’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...s a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in....
Check Stock

4 x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...s a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in....
Check Stock

2.5 Inch x 10 Feet Dust Collection Hose - Flexible Clear PVC Heavy Duty Puncture Resistant Dust Debris Fume Hoses - Reinforced With Coated Wire Helix

  • 2 - 1/2 '' x 10' puncture resistant, heavy-duty hose (no collapse, tear or kink), Includes 2 stainless steel key hose clamps.
  • Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system.
  • Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.
  • Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired.
  • 100% Satisfaction guaranteed - 30-day return policy + 12-month warranty.
Check Stock