Reviews Red Tint Spray For Tail Lights

PSEQT 6'' Rectangle Marker Lights Red LED Side Tail Clearance Pickup Trailer Lights Waterproof with 20 Diodes and High Low Brightness Front Rear Turn Signal Marker Lights

  • ✅【20LED Truck Side Lights】4 x 6'' rectangle side lights uses all-transparent integrated design and has built-in 20pcs LED diodes. Light color: Red.
  • Working temperature: -40℃ to 75℃. 3-wire connection design, high and low light dual function..
  • ✅【Wide Use】Rectangle Red Side Lights fit for side marker lights, clearance lights, turn signal lights, running Lights, tail Lights, stop turn tail lights, car auxiliary turn signal lights, etc. Widely used for 12V Pickups, Trailers, Trucks, Heavy Trucks, Wrangler, Van, SUV, ATV, UTV, RV, RZR, F350, F450, Caravan, Camper, Motorhome, Boat, Lorry, Bus, etc..
  • ✅【Fully Enclosed Integrated Side Marker Lights】Made of sturdy PMMA material and 5mm LED lamp beads, fully sealed waterproof, moisture-proof and dustproof, can work in various environments such as rain, fog and snow. 20 high spotlight beads output high-brightness red light, low power consumption and energy saving..
  • ✅【Easy to Install】3-wire connection: Black is ground, Red is low brightness as Tail/Running Lights, White is high brightness as Brake/Stop/Turn Lights. Surface mount, fit for front, rear and side of the car. Can be installed anywhere you need, as long as the size is right..
Check Stock

NDRUSH Blackout Side Marker Lights Vinyl Tint Film Precut Overlay Front Rear Sidemarker Wrap Cover Compatible with Chevy Camaro 2016 to 2021

  • Fitment: Compatible with 2016 2017 2018 2019 2020 2021 Chevrolet Camaro front rear side marker lights (NOTE: just wipe the light when using, do not spray water to the film).
  • Designed with Special Vinyl Channel: Adopting special technology allows you to push the liquid and bubbles out easily, no creases in the tint wrap film. give your vehicle blacked out look.
  • Light Lens Protection: Made from the high quality cast vinyl, which makes your side marker lights scratch-resistant and weather resistant. The back of the tint kits is adhesive, not easily peel off after go through heavy rain, car wash, extreme heat and cold.
  • Easy to Install: This is precut sidemarker light overlays, no modification or trimming needed, just tear off the film and apply the tint cover to your lights. recommend wrapping the corners with a heat gun or hairdryer to stick better.
  • Package Including: 2 x front marker light vinyl film + 2 x rear marker light tint covers + 1 x practice overlays + 1 x squeegee + 2 x clean kits. 180 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.
Check Stock

Partsam Submersible Led Truck Trailer Lights Kit 12V, 2xSquare Led Trailer Light Kits+14.17' Red 3 Light 9 LED ID Light Bar+2xAmber Side Marker w/ Reflex+ 8pcs 2.5' Oval Led Marker Clearance Lights

  • Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 8Pcs Mini Oval side fender marker clearance lights (4Red+4Amber), 1Pc 14.17 Inch Red Clearance 3-Lamp Truck Trailer identification light bar, 2Pcs amber Clearance Lights with Reflex Lens, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
  • Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
  • High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.
  • Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
  • Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter....
Check Stock

KOMAS 12” X 48” Tint Vinyl Film Sticker Sheet Roll for Car Headlight, Tail Lights, Fog Lights with Squeegee + Cutter (Glossy Orange)

  • Fit For: Universal fit, it will fit any headlights, tail lights, fog lights, side-marker lights or even top part of the windshield of any cars, SUVs or Trunks. Please make sure the size is enough for your vehicle..
  • FEATURES: This Tint can not only provide an amazing color changing scheme but also can protect your headlights from scratches and UV rays.
  • INSTALLATION: This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!.
  • PACKAGE INCLUDED: 1 x Glossy Orange Light Vinyl Tint Film (12” X 48” ).
Check Stock

12” X 48” Dark Black Tint Air-Release Vinyl Wrap Film Roll for Car Headlight, Taillight , Fog Lights with Squeegee + Cutter（Dark Black）

  • SUPERIOR TRANSPARENCY:The light transmittance of the headlight tint is as high as 90% and will not affect the original light source. The headlights with the tint film work well in rain, fog, snow or night driving..
  • Fit For: Universal fit, it will fit any headlights, tail lights, fog lights, side-marker lights or even top part of the windshield of any cars, SUVs or Trunks. Please make sure the size is enough for your vehicle..
  • GREAT ADHESION – The vinyl wrap has good adhesion and fits tightly and seamlessly with the car lights without affecting the car wash..
  • INSTALLATION: This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
Check Stock

DTR2017 Smoked LED Tail Light, Integrated Motorcycle Rear Brake License Plate Lights for Harley Dyna, Road King, Street Glide, Sportster 1200, Softail and Touring

  • Package includes 2 Pieces UTV tail lights Replacement for Polaris Ranger 570 900 1000 / Brutus HD / General rear tail lights. This new Led tail light can directly replace your stock tail light and fit both your driver side and passenger side. Replacement for Part Number: 2412774.
  • Each UTV tail light has 14 piece high quality 3528 LED chips with more than 30K working hours, two step lighting and can work as both running light/tail light and brake stop light.
  • Compatibility of the Rear tail light: Compatible with Polaris Ranger 570 full size tail light/Ranger 900 tail light/Ranger 1000 tail light/Compatible with Ranger Brutus HD tail light/Compatible with Polaris Ranger XP 1000 tail light/Compatible with Polaris Ranger XP 900 tail light/Compatible with Polaris Ranger Crew XP 1000 tail light/Compatible with Polaris Ranger Crew XP 900 tail light/Compatible with Polaris Ranger Crew 570 tail light/Compatible with Polaris Ranger Diesel tail light etc..
  • This tail light has some difference form the stock tail light. It does not have the reflective sticker on the side that your stock tail lamp has. Of course you can use the 3-M reflector tape for it. Also this tail light assembly does have inserts for bolts. You will need to ch....
Check Stock

Luxiv Window Tint Application Tools Kit 5 Pcs Vehicle Glass Protective Film Installing Tool Car Window Film Squeegee Automotive Film Scrapers Window Tint Tools

  • 【5 in 1 Window Tint Tools】: Package included 5 pcs of window tint tools, a blue squeegee with a soft cloth, a big red squeegee, a safe membrane....
  • 【Install Any Places Easily】: Big red squeegee suit for smooth large area window film, blue scratches with soft felt suit for a smooth small area,....
  • 【500ml Spray Bottle】: Vehicle glass protective film installing tool kits include a 500ml spray bottle, large enough capacity to hold water or....
  • 【Safe membrane cutter】: Orange safety vinyl sheet cutter suit for cutting window film, membrane, and wallpaper, can be straight cut without any....
  • 【Please Note】: Because the product is a mini-size part, children under the age of three are not suitable for use.
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
  • These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....
Check Stock

Partsam 6 Inch Oval Red Led Trailer Tail Lights Smoked Sealed Grommet Mount Stop Turn Tail Brake Marker Lights for Trailer Truck RV Grommet and Plugs Included Waterproof 12V (Pack of 6)

  • ...sibility conditions to light up the rear of your vehicle or trailer.
  • Dimensions: 7 1/4" x 3" x1"(with grommets) and 6 3/8" x 2 1/5"x1"(without grommets), a hole about 6 3/8" need to drill to install it.
  • EASY INSTALLATION - Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer lights to be installed in both horizontal and vertical orientations. Powering the oval tail lights off of the included industry standard three prong harness, one can have these tail lights installed in no time.
  • DURABLE WATERPROOF DESIGN - Each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather.
  • Package and Warranty: Package includes 6PCS 6 inch Smoked red oval LED tail lights,6Pcs Rubber Grommets and 6Pcs industry standard 3-prong plug with attached wiring Pigtails.
  • We truly offer 1 year warranty! If have any questions or issues about our smoked trailer lights lights, Please feel free to us and we will reply in 24 hours.
Check Stock