Reviews Reclaimed Petg

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Gray)

  • 【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
  • 【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / – 0.03 mm, 1 KG Spool (2.2lbs)..
  • 【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
  • 【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..
Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Black)

  • 【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
  • 【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / - 0.03 mm, 1 KG Spool (2.2lbs)..
  • 【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
  • 【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..
Check Stock

T3D Cookie Cutters Peppa Cookie Cutter, Suitable for Cakes Biscuit and Fondant Cookie Mold for Homemade Treats

  • The Dimensions refer to the longest side. Dimensions are approximate. Color may vary..
  • Made of PLA/PETG Plastic which is environmentally friendly and approved for food contact by the FDA. PLA/PETG is biodegradable, derived from natural resources such as corn starch, tapioca roots, or sugar cane. Minor imperfections may occur to outside of PLA/PETG but will not effect cookie/fondont shape..
Check Stock

vidaXL Nightstand w/ 2 Drawers Solid Reclaimed Wood Side End Storage Stand

  • This antique reclaimed wood bedside cabinet, coming with 2 drawers, is the perfect piece for your room. Differences in grains and colors give this furniture a unique character..
  • This antique-style wooden bedside cabinet, coming with 2 drawers, offers you certain storage space and helps you to maintain your items in great order.
  • You can also put a desk lamp, toiletries or some decorations on the sturdy top surface. This bedside cabinet is made from reclaimed wood, which means that every piece of furniture is unique and slightly different from each other.
  • The furniture made from reclaimed wood has characteristics of different woods like teakwood, acacia, mango wood, saal wood etc.
  • Reclaimed wood is solid, stable, durable, and beautiful.
Check Stock

TECBEARS PETG 3D Printer Filament 1.75mm Orange, Dimensional Accuracy +/- 0.02 mm, 1 Kg Spool, Pack of 1

  • [Premium PETG Filament] TECBEARS PETG 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. 100% made of environment-friendly natural materials, harmless to users and the environment..
  • [Clog-free & Bubble-Free] Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PETG filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • [Less-tangle & Wide Compatibility] Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • [Dimensional Accuracy & Consistency] Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • [Printing Tips] Recommended Extrusion/Nozzle Temperature 220°C - 250°C, Bed 70°C - 80°C.It will be your risk-free choice, please be assured that we’ll al....
Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....
Check Stock

Official Creality 3D Printer Filament, ABS Filament 1.75mm No-Tangling, Strong Bonding and Overhang Performance Dimensional Accuracy +/-0.02mm, 2.2lbs/Spool

  • 【Clog-Free & Bubble-Free】Creality CR-PETG filament is designed and manufactured with a clog-free patent to guarantee a smooth and stable printing experience with these PETG refills. Our PETG consumables are fully dried for 24 hours before packing, then vacuum sealed in PC bags with desiccant..
  • 【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line is tidy and less tangle, so as to avoid possible snap and line breaking.
  • Larger spool inner diameter design makes feeding smoother..
  • 【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PETG filaments of 1.75 mm diameter, dimensional accuracy + / - .03 mm.
  • 【Notes on Printing】Recommended Nozzle Temperature: 230℃-250℃ (446℉- 482℉), Recommended Bed Temperature:60℃-100℃(140℉-212℉)..
  • 【After Sales Service】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock