Reviews Reamers For Nonferrous Materials

Oatey G30203 Dark Cutting Oil, 1 Pint Jug, 1-Pack

Wide application range - production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines.
Contains highly effective extreme-pressure additives to control built-up edge.
Compatible with all ferrous and nonferrous materials.
Extremely stable and fine emulsion to reduce carry off and to facilitate getting the fluid to the point of cut.
Rejects tramp oil to help extend sump life and increase recycling options.

The product is 1/8" Diameter, Tungsten Carbide Cutter.
Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..

Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes..
Heavy-duty hex shank has six flats and is designed for portable pneumatic tools.
7-1/8" Flute Length, 11-3/4" Overall Length.

4-piece nonferrous carbide rotary burr set for peneumatic acccessories and die grinder burr.
High grade tungsten carbide burr, 1/4 Inch shank aluminum single Cut.
Aluminum die grinder bits are also for use on non-ferrous and non-metallic materials: Plastic, Zinc. It is designed for rapid stock removal with minimum chip loading.
High quality manufacturing method delivers vibratin free operation.
1/4 inch shank for rotory, 4 pcs per pack, SA-3NF, SC-3NF, SD-3NF, SF-3NF.

13 pc. Set Screw Machine Length Heavy Duty 135-Degree Split Point.
1/16 – 1/4 by 64ths, 135-Degree split point.
High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
Black oxide prevents chip building, galling and welding. Commonly used for low carbon, stainless and ferrous metals.

Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.

Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.

Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
Heavy-duty hex shank has six flats and is designed for portable pneumatic tools.

Provides uniform grain for final finishing on stainless steel, ferrous, and nonferrous metals.
Highly conformable for consistent finishing on contoured, curved and other surfaces.
Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel.
Convolute construction provides a balanced, smooth running wheel throughout product life.
Open, nonwoven web runs cool and lessens impact on heatsensitive materials.