Reviews Raspberry Pi Audio

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

  • [What Is It] Small, portable with self contained radio and antenna, SHARI(SA818 Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
  • [Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
  • In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
  • [Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
  • [Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
  • SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
Check Stock

Smraza Raspberry Pi 4 Touchscreen with Case, Cooling Fan, 4 inch Touch Screen IPS LCD Display 800x480 HDMI Monitor for RPI 4B 2GB/4GB/8GB with Touch Pen, Heatsinks(Support Raspbian Kali Octopi Ubuntu)

  • 【4 inch HD Touchscreen】800x480 pixel hardware resolution, support HDMI input and HDMI audio output, backlight brightness adjustable. Resistive touch control, convenient human-computer interaction experience. 4 inch IPS full-angle display, refresh rate up to 60FPS. Support for playing video and games, while the picture is stable and clear can be used as a monitor screen, supporting 3.5mm stereo audio output..
  • 【Cooling System】2 layers raspberry pi 4 touchscreen case especially designed for Raspberry Pi 4 and 4 inch touch screen. Come with cooling fan and 4 pcs heat sinks (size of heatsinks for CPU: 25 x 25 mm. ), it's better for heat dissipation..
  • 【4inch display case for raspberry pi 4】4-inch touch screen monitor with an Acrylic case and related screw kits, you can choose to install it on a wall or stand to easily connect the monitor with Raspberry Pi or other devices..
Check Stock

ELECROW 8 Inch Touchscreen Monitor Portable Screen HDMI-Compatible LCD Display 1280x800 for PC Raspberry Pi Jetson Nano Game Consoles

  • 【Touchscreen Monitor】ELECROW 8 inch touch screen monitor has an impressive feature of plug and plays that doesn’t require any driver installation, support 5 points touch max. This small portable monitor support HD 1280×800 resolution, IPS screen help keep colors consistent at a wide viewing angle..
  • 【Portable Monitor】8 inch mini Raspberry pi touchscreen with a simple design, the size is only 195*121mm, and aluminum alloy shell makes this cctv monitor creates a nice look while keeping things compact and durable..
  • 【Easy Connection】 The HD port of this small monitor is for audio/video transmission, works with HDMI-compatible devices like computer, laptop, Raspberry pi, Jetson Nano,and game consoles. This raspberry pi monitor is also a USB-powered monitor which can be powered by a power bank, PC, and wall plug. But please note that the touch function will only work when connect to USB port of signal output devices like laptop/pc/Raspberry Pi, but not power bank or wall plug..
  • 【Support Speaker and VESA Install】This raspberry pi screen enhance your audiovisual experiences with built-in speakers. Volume/brightness can be adjusted. You can mount the portable screen on the wall via VESA or on the desk via the monitor stand..
Check Stock

10.1 Inch Raspberry Pi Touchscreen Monitor, 1280x800 IPS LCD Display with Built-in Dual Speakers, VESA Mountable, Compatible with Raspberry Pi 4B 3B+

  • 7 INCH RASPBERRY PI TOUCHSCREEN: UPERFECT 7 inch raspberry pi touchscreen with case and fan and stand all in one machine has HDMI port for computer/ pc, Type C port for phone/ game, audio jack for headphone, DC 12V port for power. Which you could use as a normal monitor. This amazing monitor also has three side boards to choose. One for regular display, one for rpi 3 series, one for rpi 4 series..
  • PERFECT FOR DIY PROJECTS: This 7″ touchscreen monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. Turn your Raspberry Pi into a touch screen tablet, infotainment system, or standalone device..
  • DO NOT NEED KEYBOARD AND MOUSE: Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest UPERFECT Raspberry Pi touchscreen for full functionality without a physical keyboard or mouse. Truly interactive – the latest software drivers will support a virtual ‘on-screen’ keyboard, so there is no need to plug in a keyboard and mouse..
  • SIMPLIFY IoT & HOME AUTOMATION WORKFLOW: Make your own Internet of Things (IoT) devices including a visual display more convenient using UPERFECT rpi touchscreen all-in-one machine. S....
Check Stock

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

  • 5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
  • 5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
  • an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
  • Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.
Check Stock

7inch HDMI LCD (H) (with case) 1024x600 Capacitive Touch Screen IPS Display HDMI Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10

  • Compatible with Raspberry Pi 7 inch touch display screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
  • Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.When works with Jetson Nano,supports Ubuntu, single point touch, driver free.
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
  • 3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Check Stock

waveshare 7inch HDMI LCD (H) (with case) 1024x600 for Raspberry Pi IPS Display Capacitive Touch Screen Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10

  • for Raspberry Pi 7'' display with touch screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
  • Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
  • 3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Check Stock

ELECROW Raspberry Pi Monitor 7 Inch Touchscreen IPS Display 1024x600 USB Powered HDMI-Compatible for Raspberry Pi Banana Pi BB Black Jetson Nano Win PC

  • 【Mini Screen for Raspberry Pi】7 inch mini monitor, support 1024*600 resolution, IPS screen help keep colors consistent at a wide viewing angle. Tempered glass touch panel, more durable and more scratch resistant..
  • 【Neat & Tidy Connection】With the accessories included in the box, you can easily mount your Raspberry Pi on the back of the monitor. Comes with customized connectors for Raspberry Pi 4, no more tangled cables jutting out from sides of monitor. 4 holes that hidden on the corners of backside can help you to mount the monitor to your DIY projects..
  • 【USB Touch Screen】Simply connect the screen to device via HD interface and power the USB touch port to achieve touch function and no need to install any driver, just plug and play! When used as a computer monitor, supports Win10/8/7, 5-point touch. When worked with Raspberry Pi, supports Raspbian, Ubuntu, Kali, Retropie, single touch. When worked with Jetson Nano, support Ubuntu, single touch..
  • 【Support Speaker, Brightness & Volume Adjustment】Backlight& Volume can be adjusted as you need. Comes with 2 audio speakers which help to enhances your audiovisual experiences..
  • 【Portable Monitor】Broadly you can use it with as a Raspberry Pi touchscreen, portable computer monitor, mini gaming ....
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock