Reviews Raid Systems

SEAGATE ST2000VXZ08 Skyhawk 2TB Surveillance Hard SATA 6Gb/s 64MB Cache 3.5 Internal Drive-Frustration Free Packaging ST2000VX008

Custom-built for surveillance applications with Image Perfect firmware for crisp, clear, 24×7 video workloads.
Maximum 180TB/year workload rating—3× the workload rating of desktop drives—for reliable performance in write-intensive surveillance systems.
Rotational vibration (RV) sensors help maintain performance in RAID and multi-drive systems (4TB or higher).
Up to 10TB of capacity to store up to 10,000 hours of HD video.

Custom-built for surveillance applications with Image Perfect firmware for crisp, clear, 24×7 video workloads.
Maximum 180TB/year workload rating—3× the workload rating of desktop drives—for reliable performance in write-intensive surveillance systems.
Rotational vibration (RV) sensors help maintain performance in RAID and multi-drive systems (4TB or higher).
Up to 10TB of capacity to store up to 10,000 hours of HD video.

Support 3.5″ SATA I / II / III hard disk drive up to 16TB per drive, Support Hard Drive Transfer Rate up to SATA III Speed. Hardware Raid controller built-in on board with one-button control..
One Button Raid Control support Single Drive Mode, Raid 0 (Spanning) JBOD, Raid 0 (Stripping), Raid 1 (Mirroring), Raid 3 (Stripped set with dedicated parity), Raid 5 (Stripped set with distributed parity), Raid 10 (Mirroring + Striping).
Transfer rate up to 5.0Gbps via USB 3.0, up to 3.0Gbps via eSATA..
Smart Fan with built-in thermal-sensor, Auto & Manual modes, and 3 speed levels.
Compatible with Mac OSX 10.8 or later and Windows 10 / 8.1 / 8 / 7.

Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
80 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
Configures hardware RAID modes easily using mode switches.

Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
100 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
Configures hardware RAID modes easily using mode switches.

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Interface: USB 3.0, eSATA, and FireWire 800.
Simple RAID configuration via switch settings, no software required.
RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, SPAN, JBOD.
Note: We recommend using only Enterprise or NAS drives (512e only). The Mobius is not compatible with 4Kn hard drives..

Featured dual 1GbE LAN ports to support network failover, and with Link Aggregation enabled, DS220+ provides over 225 MB/s sequential read and 192 MB/s sequential write throughput. Data can be further protected with RAID 1 disk mirroring to prevent sudden drive failure..
Intel dual-core processor with AES-NI hardware encryption engine.
2 GB DDR4 memory (expandable up to 6 GB).
Access, share, and sync your data easily across different operating systems and devices..
Average 15% performance boost to photo indexing and other computing-intensive operations, as well as database response time..
Check Synology knowledge center or YouTube channel for help on product setup and additional information.