Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check StockWomens Epic Wife Since 2009 T-Shirt 10th Wedding Anniversary Gift T-Shirt
- Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
- Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece.
- Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it.
- Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently.
- Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire.
- Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.
Check StockUniversal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring
- Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
- Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
- Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
- Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
- Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check StockHomebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System
- 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
- 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
- 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
- 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
- 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stockjssandan Power Wire Harness Connector for 12V SLA Battery Ride Toys Replacement for Fisher-Price Power Wheels
- Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
- Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece.
- Male Quick Disconnects will last for numerous wiring projects. Marine, automotive,....
- Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently.
- Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been....
- Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.
Check StockHYCLAT Red 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Electrical Motors Plug Connector Recovery Winch Trailer (4 Pack)
- The quick connect plug is suitable for electric vehicle, UPS communication power supply, electric machine, electric forklift, the power equipment, etc.
- Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.
- Package include: 2x connector ends, 4x terminal pins.
- Quick connector set from Driver Recovery Products. Provides simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector.
Check Stock
Lisle 39210 Main Fuel Line Disconnect
- GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
- FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
- Measure your application to ensure correct fitment.
- EASY TO USE: Each fuel tool is color-coded by size for easy identification.
- Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
- Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
- BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
- Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
- PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check Stock
Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI
- QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
- VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
- COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
- EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
- AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check StockPERA 2 Pair Pin Lock coupler MFL 2 Gas & 2 Liquid Quick Disconnects Set
- Packing: Pin Lock Gas Disconnect MFL 1/4”(2PCS) , Pin Lock Liquid Disconnect MFL 1/4” (2PCS).
- Material: PBT Material for Pin Lock Quick Disconnect Body and Stainless Steel for Threaded End.
- Use: The Pin Lock MFL Disconnects used for Cornelius style Pin Lock keg (Coke), Works for Beer or Soda.
- A Perfect Gift for Home Brewing and Wine Making Lovers.
- Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock 
