Reviews Quick Change Fittings

Culligan IC-EZ-4 EZ-Change Inline Icemaker and Refrigerator Filtration System, Premium 500 Gallon Filter Included

  • Inline refrigerator and icemaker filter with easy change filter.
  • EZ change replacement filter cartridge with quick connect fittings, just twist on and twist off.
  • The included RC-EZ-4 filter cartridge reduces: particulates class I, chloride, cyst and chloroform, MTBE and Mercury, lead, turbidity, and removes bad taste and odor from water.
  • The included RC-EZ-4 filter cartridge is tested and certified by NSF International to NSF/ANSI Standard 42 for the aesthetic reduction of Chlorine Taste and Odor, Chloramines and Nominal Particulate Class 1. Standard 53 for the reduction of Cysts, Mercury, lead, VOC, MTBE and Turbidity.
  • The included RC-EZ-4 cartridge can filter up to 500 gallons of water or can last for 6 months.
  • Includes: head assembly, RC-EZ-4 filter cartridge,mounting screws, cartridge change reminder sticker.
  • Head assembly fits replacement cartridges, RC-EZ-1, RC-EZ-3 and RC-EZ-4.
  • Water flow rate from faucet, .5 gpm at 60 psi.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 23 Gallon & 30 Gallon | RV Water Holding Tanks

  • Combo Pack of 23 Gallon and 30 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials -....
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank,....
  • EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5"....
  • 23 GALLON WATER TANK MEASUREMENTS: 39 1/2" Longest Length (not including fittings) x 14 3/4" x 8 3/4" Tank can sit on any side - rotate tank to change....
  • 30 GALLON WATER TANK MEASUREMENTS: 34 1/2" Longest Length (not including fittings) x 17 1/2" x 12" Tank can sit on any side - rotate tank to change....
Check Stock

POHIR Pressure Washer Gun 3600 PSI with 3/8'' Swivel Quick Connect Extension Wand, M22 15mm and M22 14mm Fitting 30 Inch 7 Nozzle Tips

  • Pressure washer gun with M22-14 and M22-15 fittings for direct connection to 14mm or 15mm inner diameter pressure hose fittings，3600 PSI Max pressure, 8GPM Max Flow. Max temperature of water is rated to 60℃ / 140 F..
  • M22 14mm fitting is compatible with Simpson, CraftsmanBriggs Stratton,Karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz power washer..
  • Pressure washer gun wand extension with 1/4''standard quick connector, can be used with any accessory with a 1/4'' plug. Such as nozzles tips, foam cannon, water broom, pivoting coupler, undercarriage cleaner, surface cleaner. Comfortable handle design for easy handling..
  • 16 inch pressure washer extension wand can change the length of the pressure washer short gun, make it a total length of 30 inches,Replacement short pressure washer gun fits gas and electric pressure washer with M22 fitting..
  • Package include: 1pc pressure washer gun,1pc extension wand,1pc M22 14mm conver fitting, 1pc M22 15mm conver fitting,1pc 3/8" quick con....
Check Stock

Hygger 215 GPH Quick Water Change Aquarium Pump Submersible Fountain Water Pump Fish Tank Pond Drain Transfer Pump with 2 Adaptors

  • 【2-IN-1 Water Pump】this submersible water pump works like a charm in terms of aquarium water change, transferring water and powering fountain waterfall.
  • 【Low Water Level Draining】Easy to use, simply plug in power for quick water draining, this bottom intake pump can remove water level down to 1/4" and suck out 1/5" debris and fish waste with ease.
  • 【Powerful, Quiet Operation】Provides efficient, instant water flow, power: 18W, Maximum flow rate: 215 GPH.
  • Max Lift Height: 5.3ft (power cord's length: 6ft).
  • 【for Water Transfer Application】Oil-free magnetic driven motor, it is ideal for draining saltwater and freshwater aquarium, pond, fountain, hydroponic, pool, pool cover and hot tub.
  • 【Comes with 2 Barb Fittings】Presented two different sizes of barb fittings for desired water flow: 1/2" and 5/8", the thread size that fits ON TO the pump next to the handle is M16-2, which is a metric size.
Check Stock

Diversitech DP-1 Nitrogen Purge Tool Red

  • NITROGEN PURGE TOOL: Set the purge tool to off, connect standard 1/4" refrigerant hoses to tool, and in seconds you are ready to purge and braze your....
  • QUICK CHANGE DIAL: Quickly switch between Purge, Braze, and Off settings to get the correct amount of nitrogen flow for each one.
  • 50 PSI INLET PRESSURE: Designed to operate with a 50psi inlet pressure and maximum inlet pressure of 200psi to purge and braze properly.
  • ROBUST DESIGN: Tough and durable design ensures that it will not break like nitrogen flow meters.
  • IDEAL SIZE: Measuring 6" x 1.85" 7.5", this purge tool is the perfect size for standard fittings.
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Zhhcyyds Bleed Kit & Filler Kit Compatible with Seastar Hydraulic Steering Systems Leak Free Brass Helm Fitting Rust Free Quick Connect Professional Bleed Kit for Seastar Hydraulic Steering Systems.

  • [Leak Free]The threaded brass fittings will not cross thread which ensures no leaking or mess making when you are bleeding your Seastar hydraulic....
  • [Rust Free]All of the metal within the Seastar bleed kit is brass and stainless steel preventing rust. This ensures everlasting quality even in marine....
  • [Function]Used to replenish oil for the ship's steering system fluid. Let professional ship repairers save more time in the oil change process, the....
  • [Easy To Use]The quick connect fittings make bleeding your hydraulics system an effortless task by eliminating the need to screw in both threaded ends....
  • [Best Present]Help you fill and bleed your hydraulic steering system, a simple but professional DIY tool for add fluid/oil and bleed the air out.....
Check Stock

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock