Reviews Quartz Emitters

Rain Bird ET63-100S Drip Irrigation Pressure Compensating 1/2\ (.700\ OD) Emitter Tubing, 18\ Emitter Spacing, 100' Roll, Brown (Pack of 2)

  • only better because it doesn’t clog and requires no maintenance.
  • Pressure-compensating emitters water plants evenly from beginning to end of tubing throughout the planting area.
  • Built in 0.9 gallon-per-hour emitters spaced 18" apart.
  • Unique Micro-Porous construction creates an ultra-tight connection.
  • Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits).
Check Stock

(100' ft Roll) - USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (100' Foot Roll)

  • FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length.
  • DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
  • EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
  • EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Check Stock

Raindrip 061050 5/8X500 Poly Drip Tubing 5/8

  • Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run.
  • Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 500 ft. coil of 5/8 in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Xbox One IR Extender Blaster Cable (3 Head, 10 Foot)

  • Our dual Heads design allows you to control multiple devices with only one IR output. Works with Xbox one, Apple TV, Many set top boxes, DVD, Blu-Ray and IR repeater systems - Check the technical details below to ensure it will work for you..
  • Unlike other older IR emitters found our IR Emitter Extender Cable can handle any IR code format in 38kHz and 56kHz. This means it is designed for today's newer Audio Video equipment.
  • These are Emitters, Not Receivers. We also sell receivers as well please put this number in the Amazon search bar and they will show up- B07V8BYR96.
  • Lead is terminated with a 3.5mm mono mini plug, Length of wire: 10 feet that can be separated by gently pulling the heads apart.
  • We have designed this unit without the annoying human eye visible blink so your not annoyed or distracted every time you push a button on any remote control..
Check Stock

Raindrip 052050 1/2\ X500'Drip Water Hose, 1/2-Inch, Black Polyethylene, 500 ft

  • Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device.
  • as a feeder line that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 500 ft. coil of 1/2 in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

Stamped Emitter and Cast Iron Grill Grate Replacement Kit for Charbroil 463242715 463242716 Commercial Infrared 4B 463257520 463276016 466242715 466242815 G533-0009-W1A G533-2200-W1 17x9.5 ,3PCS Set

  • Fits Charbroil Commmerical Infrared 4 Burner Grills：463276016 463242715 463242716 463257520 466242715 466242815 Lowe's #606682, Walmart # 555179228....
  • Specification: Material:Emitters are made from stamped stainless steel.
  • Cooking grill grid grates are made from sturdy matte enamel cast iron.
  • The non-stick grates are made from sturdy cast iron which can prolong grill life expectancy and cast iron grates sit well on the stainless emitter for....
  • Compatible with the original part number of cast iron grates and stainless steel stamped emitters set: G541-0016-W2, G533-2200-W1, CHRG533-0009-W1,....
  • Note: Please compare our cooking grates & emitter plate set with your original parts and check your original size before purchasing to avoid buying....
Check Stock

Raindrip R280DT BLK 1/4-Inch by 50-Foot Black Drip-A-Long with Fittings

  • Slowly waters the soil around your plants for complete root zone hydration.
  • the dripline emits water along the entire line.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows.
  • Dripline can be cut to size and sections connect together with the included ¼ in. barbed fittings.
  • Flow rate may vary along the length of dripline with higher flow closer to the water source.
  • Use with a ¾ in. FHT X ¼ in. adapter to connect to water source.
  • Connects with included ¾ in. FHT X ¼ in. Adapter.
  • layout dripline next to plants to be watered.
  • ½ GPH non pressure-compensating emitters are spaced 12 in. apart.
  • turbulent flow design flushes out sediments which can potentially clog emitters.
  • Flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs.
  • Kit includes: 50 ft. of ¼ in. Dripline preassembled with ½ GPH drippers.
  • 5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs.
Check Stock

RainDrip 052020P Drip Watering Hose , Black Polyurethane 1/2 inch x 200 Ft

  • Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device.
  • as a feeder line that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Works with Raindrip products and other products with compatible connection type.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled conten....
Check Stock