Reviews Pwm Fan Splitter Way

2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter

Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
4 Pin Molex to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
Power three 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
Fans will be operated at the fixed Molex voltage of 12V. High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter.

15 pin SATA to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
Power three 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
Fans will be operated at the fixed SATA voltage of 12V.
SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack.

Easily realize 4 pin PWM temperature control fan parallel connection, make full use of the limited number of motherboard 4 pin interface, can be extended to connect two 4 pin /3 pin fans..
2 pack computer fan splitter cables in total, please ensure your motherboard fan header is capable of the additional electrical load before purchasing..
The braided black cable looks great and has enough length to assist with cable management..
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
2 black 10.5 inch 1 to 4 splitter fan power supply extension cables, female to male connector plug..

❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..

Combo kit comes with: 1 Radiator, 2 RGB fans, 1 fan splitter, 1 radiator gasket AND a FREE Tape Measure Tool!!.
EK-Vardar RGB fans is its simplicity as it uses standard 4-pin 12V RGB connectivity.
Dimensions: 273 x 120 x 45mm (L x W x H).
Connect two (PWM) fans from one (PWM) fan header.

4-PIN INTERFACE :4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
EASY TO INSTALL :Just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. No need to drive..
CONNECTOR TYPE :1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.Compatible with all 12V 4 pin and 3 pin PC case fans..
NYLON BRAIDED CABLE :15-inch fan HUB cable with black braided sleeve and tinned copper wire, lower resistance, stable and durable quality..
NOTE ：Only 1 interface supports speed measurement because the motherboard does not support multiple interfaces at the same time.3-pin does not support temperature control..

The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..

The 1 to 5 pwm fan splitter can supply power to 5 fans..
Come with double-sided tape, easy to install. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean..
Compatible with all 4 pin and 3 pin case fans..
Package included: 2 pack 1 to 5 splitter 5 way fan power supply cable.
We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product,....