Reviews Pwm Dc Motor Controller

DC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)

  • Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
  • Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
  • comes with start and stop button and can be controlled by external switch.
  • High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
  • Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
  • Widely applications - good to control the output of power, brightness, speed.
  • perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
  • (Note: This product can only be used for DC brushed motors, not for brushless motors).
Check Stock

LGDehome 10PCS DC 5V-36V 15A(Max 30A) 400W Dual High-Power MOS Transistor Driving Controller Module FET Trigger Switch Drive Board 0-20KHz PWM Electronic Switch Control Board DC Motor Speed Controller

  • continuous current 15A at normal temperature.
  • The maximum current can reach 30A under auxiliary cooling conditions..
  • Trigger signal source: digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support.
  • Adopt imported dual MOS parallel active output, lower internal resistance, large current, strong power, 15A, 400W at room temperature, meeting the needs of most equipment.
  • Application: The output can control high-power equipment, motor, bulb, LED strip, DC motor, micro pump, solenoid valve, etc. It can input PWM, control motor speed, lamp brightness, etc.
  • size: 1.34x0.7x0.5inch/3.4 x 1.7 x1.2cm(L*W*H).
Check Stock

weideer 7-80V PWM DC Motor Speed Controller Switch 30A Control 12V 24V 36V 48V With Screwdriver And Terminals K-012

  • Drive current: 30A max,on-board switch with operation Stop brake function；Control power: 12V 300W 24V 400W 48V 450W 72V 500W..
  • 4 high pressure tube drive ,3 high-voltage 100V high-frequency resistance capacitors, and fuses for braking. The parameters are not easy to heat and easy to replace. The standard aluminum housing protects the internal circuits and components for long-term durability..
  • Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range.
  • Easy to install：An extra screwdriver and4Terminals is provided to make your wiring more convenient..
  • Package Contents:1pcs 7-80V PWM DC Motor Speed Controller.
  • Hard carton packaging, no need to worry about the aluminum shell being bent..
Check Stock

FlexSolar 60W Portable Waterproof Solar Panel Charger kit and FlexSolar 30A 12V/24V PWM Solar Charge Controller

  • 【Compatible with Mutiple Battery Types】 FlexSolar PWM Solar Charge Controller with 30A Rated Charge/Discharge Current is Compatible With 12V or 24V System and Suitable for Sealed Lead Seal, Gel,Flooded and Lithium battery..
  • 【Efficiency PWM Solar Charge Controller】FlexSolar Solar Charge Controller adopts advanced PWM Control Method and The Charging Conversion Efficiency is Up 75-80%..
  • MULTIPLE PORTS & OPTIMIZED CHARGING】-The voltage switchable USB2.0 port, QC3.0 port, DC port, and Type-C port are ready to charge smartphones, tablets, laptops, power stations, coolers, and more. An intelligent chip automatically identifies connected devices and adjusts output current to offer the fastest possible charging speed..
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

RioRand 12V-40V 10A PWM DC Motor Speed Controller with Knob-High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current Protection

  • From left to right they are motor-, motor+, power-, power+.
  • Working voltage: dc 12V - dc 40V, control power: 0.01 - 400W.
  • Static Current: 0.02 A ( Standby ),PWM Duty Cycle: 10% -100%.
Check Stock

4\ Axial Exhaust Fan, HoseVary 3000RPM 120mm DC Dual Ball Bearings Air Exhaust Vent Muffin Fan for DIY Cooling Project (120mm to 4\ Duct Adapter)

  • DC12V MOTOR: The ventilation kit selects the casing fan with two ball bearings, DC 12V rated voltage， air flow up to 141CFM. The fan size is 120mm*120mm*38mm / 4.8"*4.8"*1.52"(L*W*T)..
  • PWM VARIABLE SPEED: The speed is adjusted from 0%~100% by manual controlling of the dimmer.Equipped with the PWM controller, directly connect with the female socket of fan and select the desired speed level will start it..
  • QUIET & AGING-RESIST: The measurement of noise level is carried out in an anechoic chamber with the microphone positioned 1 meter from the air intake. Testing fan shall be hung in clean air . Noise background＜18dB . The average service life of the fan can be estimated when 90% of the fan can operate normally after aging under the rated voltage,25℃,65%RH dust-free environment.
  • MULTIPLE-APPLICATION: To meet the various applications as need, the kit included two ducting ends to mount in round pipes, such as growing tent, 3D laser experiment, 3D cutting ventilation, 3D spray paint to exhausting bad airs or help cooling. Using directly with the casing fan by two sides of mounting meshes equipped in any small areas or square pipes..
  • PRACTICAL KIT: Package included: 1 * DC12V Axial Fan (120x38mm),1 * 3V~12V US Plug Power Adapter, 2 * Metal ....
Check Stock

AmpFlow E30-150 Brushed Electric Motor, 12V, 24V or 36 VDC, 5600 RPM

  • Fundamental Parameters: This brushless go kart motor is powerful and efficient. Input Voltage: 48V DC, Output Power: 1800W, Rated Current: 33A, Rated Speed: 4500 RPM, Maximum Speed: 5200 RPM, Sprocket: T8F-9T, Maximum Current: 37.5A. Package includes: 1 x Brushless DC Motor, 1 x Speed Controller,1 x Throttle Grip, 1 x Screw Set, 2 x Wrench..
  • 1800W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
  • Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
  • Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Potentiometer. Model: BY15WF01-A, Current: 33A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
Check Stock