Reviews Pvc Steel Thread Hose

Frienda 2 Pieces Flexible Racing Fuel Filler Hose Clear Racing Fuel Jug Hose Utility Jug Hose Gas Can Hose for Racing Fuel Jugs LC2 Jugs Auto Fuel Filler Hose Racing Fuel Container Gas Can Fuel Tank

  • What you will get: there are 2 pieces of racing fuel jug hoses in one package in total, they come in clear.
  • The racing fuel jug hose consists of a hose and thread combination, which is easy for you to use.
  • Sufficient quantities also allow you to replace them according to actual needs.
  • Thread design: the thread design of the clear racing fuel filler hose can be well connected to the tank and the vehicle, which can avoid fuel side exposure or dripping when dumping, preventing the dust from entering the tank and keeping the tank and the vehicle clearer.
  • Easy to install: the flexible fuel hose is easy for you to use, it has a simple operation, which is a good way to save your time and energy, and increase your productivity.
  • The simple use method is also very nice for novices, you do not have to worry about trouble when you use it.
  • Reliable material: the auto fuel filler hose is made of PVC, which has the characteristic of flame retardant, reliable and quality.
  • This material is also sturdy and strong, not easy to break and has a long service time, so you can use it with confidence.
  • Multiple applications: the PVC racing fuel jug hose can be applied in a variety of scenarios, it is ideal for assisting the fuel tank in professional off-road and closed race ....
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

PVC Garden Hose Adapter (1" NPT x 3/4" GHT)

  • 1″ Male NPT and 3/4″ Garden Hose Thread (GHT).
  • Perfect Solution for connecting to a garden hose via a 1″ ball valve.
  • Available sizes in 1/2″, 3/4″, 1″, 1.25″ and 1.5″ garden hose adapters.
  • 1″ MNPT Flotec FP13-43 Adapter Replacement Substitute Part.
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • ...g process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

STYDDI Garden Hose Repair Kit, Solid Brass Water Hose Mender Female and Male Hose Connector with Clamps, Fit All 5/8" and 3/4" Rubber Garden Hose, 4 Set

  • ...R FOR 5/8 AND 3/4 INCHES HOSES - This hose repair kit is designed basing on the inner diameter of the 16mm and 19mm hoses, so it is great for the devices which accept 5/8 inches connection or 3/4 inches connection, such as garden hose, water tap etc..
  • US STANDARD 3/4" THREAD FOR A WIDE RANGE OF APPLICATIONS - The female thread adapter and male thread adapter are US standard 3/4" thread, and suit for 3/4" standard threaded which has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, timer, etc..
  • EASY TO INSTALL WHEN CONNECTING OR REPAIRING HOSE - This hose repair kit contains all you need to connect a hose or repair a hose. They are easy to connect and disconnect, and they could hold up for a long time. Repairing your hose can be done in about five minutes and making the hose work even better than before. This kit could definitely save you from having to buy a new whole hose..
  • All THE PRODUCTS INCLUDED IN THIS KIT IS REUSABLE - This hose repair kit includes 4 solid brass Female connectors, 4 solid brass Male connectors, 8 stainless steel cl....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

BWE 32-Inch Long Bathroom Kitchen Faucet Connector, Braided Stainless Steel Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, x 2 Pcs (1 Pair)

  • 【Premium Material】The faucet supply hose is made of superior quality braided 304 stainless steel,resistant to corrosion and rust,and protects PVC inner tube,ensures maximum pressure and performance.never worry your hose will burst..
  • 【Easy Installation】The supply lines connection is flexible and easy to work with resisting the twist factor ensuring strong and tight seal.easy to install with simple tools within few minutes.
  • 【Standard Dimnesion】The stainless steel faucet connector 3/8-Inch female compression thread x M10 male connector compatible with most standard size faucets..
  • 【Low Leakage】The supply line come with double ring sealing washer,ensure no water leakage,solid brass connector,ensure quality and longevity..
  • 【Widespread Use】32 inch(81 cm) faucet water supply hose come with lead free M10 male connector,suitable for bathroom/kitchen sink,washibasin,water heater etc,.
Check Stock

Rain Barrel Diverter Kit, Water Barrel Spigot 3/4 PVC Fittings Ball Valve with Hose Faucet Adapter for Water Tanks, Aquariums, Tubs, Pools, Garden Barrels

  • Made of high strength plastic, with good corrosion resistance tough and not easy to break..
  • Only need to drill a 1.6 inch hole to install..
  • Suitable for rain barrels, aquariums, water towers, water tanks, irrigation, swimming pools, etc..
  • The kit including 1 pcs 3/4 inch PVC ball valve ,1 pcs 3/4 inch PVC bulkhead fitting and 1 pcs 3/4 inch PVC hose adapter for rain buckets..
  • Please note: This product is NPT thread, not suitable for 3/4″ garden hose.Requires GHT to NPT adapter to install 3/4″ garden hose..
Check Stock