Reviews Pvc Plastic Fitting

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Hamineler 24 PCS Pneumatic Straight Plastic Connectors 1/8inch NPT Thread 1/4inch Tube OD Pneumatic Elbow and Straight Combination Connect Fittings

  • Adatta per PU / PA / PE / PVC 1/4" tubi OD.
  • Medium: Air, Operating Pressure: 0- 150 PSI, Working Temperature: 32～140°F..
  • Package includes: 12 PCS Elbow Connect Fitting Connectors 12 PCS Straight Connect Fitting Connectors.
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Rain Barrel Diverter Kit, Water Barrel Spigot 3/4 PVC Fittings Ball Valve with Hose Faucet Adapter for Water Tanks, Aquariums, Tubs, Pools, Garden Barrels

  • Made of high strength plastic, with good corrosion resistance tough and not easy to break..
  • Only need to drill a 1.6 inch hole to install..
  • Suitable for rain barrels, aquariums, water towers, water tanks, irrigation, swimming pools, etc..
  • The kit including 1 pcs 3/4 inch PVC ball valve ,1 pcs 3/4 inch PVC bulkhead fitting and 1 pcs 3/4 inch PVC hose adapter for rain buckets..
  • Please note: This product is NPT thread, not suitable for 3/4″ garden hose.Requires GHT to NPT adapter to install 3/4″ garden hose..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock