Reviews Push pull Toggle Clamp

DELTA FAUCET RP31612 Replacement Hose/Spray, Chrome

  • MULTI-USE PORTABLE HANDHELD SINK SPRAYER: With 2 easy steps, you can make an extension of your existing faucet with our Easy Spray Handheld Sink Sprayer. Create ease for yourself when it comes to washing your hair, bathing your baby, washing your dog and washing your vegetables. You can even use it for hand washing clothes or other items in your kitchen sink. This is a great alternative to use for your kitchen sink and BEST FITS traditional non-pull down faucet fixtures..
  • STEP 1: Remove your old aerator from the faucet spout and install the new aerator (included in packaging) in its place to attach sprayer. The included aerator fits a 15/16" outside thread and 55/64" inside thread (27 NPT).
  • STEP 2: Align tabs on quick-connector adapter with markings as guides to gently push adapter up into aerator and turn to lock hose in place with a ¼ turn to the right.
  • QUICK AND EASY STORAGE WITH REMOVABLE HOSE: To remove hose, turn water off at faucet source, gently push up on hose and turn clockwise a 1/4 turn to the left to release from aerator..
  • EASY TO USE WITH ON/OFF TOGGLE SWITCH: The handheld portable sprayer has a convenient on/off toggle switch that allows you to control the water flow from light to full, depending on your needs..
Check Stock

Weltool Tactical Shotgun Flashlight Mount Universal - QM8 Quick Release Mount FIts Multiple Scope Size 1\-30mm

  • 【Compatible】Figure 8 open-ended light holder with upper and lower clamps, will allow flashlight to be attached to barrels or scopes. With rail on the bottom. Will fit Remington 870.
  • 【With Protective rubber inserts】Incorporated into the holder, reducing friction and shock damage to the surface of the flashlights and other components held in the clamp..
  • 【Quick-Detach (QD) toggle, No tools needed】can quickly install and remove the Light Holder from the barrels or scopes. The QD toggle can also loosen and tighten the clamps by rotating the toggle on its axis..
  • 【Clamps Size】When the adjusting screws are fully tightened, the clamps may hold up to 18 mm, fully opened, the clamps may hold up to 30 mm. QM8 allows for different diameters between the upper and lower clamps (i.e. upper clamp holds 25 mm, lower clamp holds 32.5 mm) The diameter of barrels or scopes held can vary from 18 mm – 30 mm (the flashlight exposed tube body should be at least 25mm.).
  • 【Material】6061 Aerospace Aluminum alloy with anodization, Durable and Light-weight..
Check Stock

6 Pack Toggle Latch Clamp 4001 Adjustable Toggle Clamp Latch Smoker Latch Clamps Heavy Duty Toggle Latches 330Lbs Holding Capacity Pull Latch Clamp for Smoker Lid Jig Tool Box Case 24PCS Screws

  • EASY TO INSTALL & ADJUSTABLE DESIGN: Vicuna R toggle latch clamp are easy to install, just fix them with screws. The installation distance is adjustable, the maximum overall length is 4-1/8”, and the lock-up range is from 3-1/2 to 4-1/8 inches long. Use them to keep two halves closed tightly or loosely as you like. Just adjust the bolt and you will get the maximum tightness..
  • MORE STURDY & ANTI-RUST: Vicuna R toggle clamp latch is made of premium metal plating zinc for corrosion resistance, and anti-rust. Works well for different temperature environments, indoor or outdoor. A soft plastic-covered handle makes you more secure and comfortable when using..
  • STRONGER HOLDING POWER: Vicuna R heavy duty toggle latches are made of the highest quality metal materials and advanced technology, and enough strength to hold 330lbs(150kg). Stronger than most 4001 latch in the market. Each clip holds amazing tension until it is released, perfectly suited to your different needs..
  • WIDELY USED: Vicuna R adjustable toggle latch perfectly fits the freezer door, cabinet doors, garbage cans, table leaf, storage box, tool boxes, cases, smoker lid, sliding doors, trailer tailgates, etc. Our clamps are a great helper for you in making jigs, tool fixtures, work fixing,....
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

chfine 10 Pack Hold Down Toggle Clamps Woodworking Latch Antislip Red Hand Tool Holding Capacity Antislip Horizontal Heavy Duty Toggle Clamp 201B 220lbs Quick Release Tool

  • Latch Clamp 201B with plastic cover handle, easy, safe and comfortable operation. Material: Metal, Plastic, Rubber Cushion..
  • Package Included :10pcs smallest hold-down toggle clamp with function - Oil and Stain resistant red vinyl hand grip..
  • The set of toggle clamps are suitable for stamping and assembling, and the surface of cold-rolled steel is treated by electroplating and rust prevention so that it has higher strength and wear resistance..
  • Fix on the surface of the boards with the screws. The toggle clamps hold the item tightly being cut and tied. Provides an adjustable and secure hold for your workpiece while drilling, welding or milling..
Check Stock

Red Hound Auto Pull Latch Toggle Clamp Adjustable 304 Stainless Steel Marine Grade for Cabinets Doors Storage Boxes and More 2-1/8 Inch 54 mm

  • 1 adjustable stainless steel pull latch toggle clamp (mounting hardware not included).
  • Made of heavy duty marine grade 304 stainless steel.
  • Main body length approximately 2-1/8" (54 mm).
  • Perfect for cabinet doors, tool boxes, storage boxes, smoker lids, cases and more.
Check Stock

4 PCS Push Pull Adjustable Toggle Clamp, Quick Release Hand Tool for Woodworking, 500Lbs Holding Capacity Toggle Latch, GH-305C Stroke Clamp for Welding, 32MM

  • 【4 Pack 32MM Toggle Clamps】 GH-305C Model, Straight-Line Action Clamps, 180 Degree Handle Opening Angle, Holding Capacity：227 kg/ 500 lbs.
  • 【Easy Adjustable】Maximum overall length is 6-1/2”, lock up range from 5 to 6-1/2 inches long.
  • Clamping force is quite stable and reliable..
  • 【3 Heavy Duty Compositions】These quick release toggle clamp consists of a flange base plate for installing the toggle clamp firmly, adjustable pressure tip for flexible clamping, and ergonomic ribbed-plastic handle for safe and comfortable operation..
  • 【Soild Materials】Made of zinc-plated, cold-rolled carbon steel that resists corrosion, be used for a longer time..
  • 【Ideal for Clamping Jig】 Ideal for welding, moulding, jointer jig for table saws, cabinet cases or router tables, fixtures, assemblies and movable bases..
Check Stock

Accessbuy Toggle Latch Clamp 4002 Style,550Lbs Holding Capacity,Toggle Latches with Lock-Hole,Adjustable Heavy Duty Medium Latch for Smoker lid,ToolBox Cases and More 5.7inch

  • 【MATERIAL】:Our toggle latch clamps are made of 2.6mm thick carbon steel,durable and sturdy. And galvanized coating makes it....
  • 【ADVANTAGES】: This latch action toggle clamp is adjustable. Just simply turn the adjustment lever so that you can make it tight or loose.....
  • 【EASILY INSTALLED】: Easy to install. Just fix it with screws or weld, and then turn the adjustment lever to adjust a proper distance..
  • 【MUTIPLEPURPOSE】：This lockable heavy duty toggle latch clamp can be used in many situations. Such as locking storage boxes, tool boxes, cases,....
  • 【PACKAGE】：4 pack. If there’s any problem, please feel free to contact us, we will give you a replacement or refund your money back within 30....
Check Stock

6 Pcs Hand Tool Toggle Latch Clamp, 201B Quick Release Horizontal Toggle Clamp with PVC Non-Slip Hadle, Stainless Steel Toggle Latch for Woodworking, Welding, Mechanical Operations,220 Lbs

  • [Corrosion-Resistant High-Quality Materials] Our hand tool toggle clamp is made of stainless steel. The cold-rolled steel surface is electroplated and anti-rust treated, which has high hardness and corrosion resistance..
  • [Four-Link Dead Point Structure] The toggle clamp adopts a quick clamping and quick opening structure designed by the four-link dead-point principle, which is flexible and smooth without slipping. Maximum clamping force is 90kgf..
  • [Robust and Stable Design] The clamping base is designed with reinforced ribs, which is firmer in use and the clamping is more stable. The adjusting shaft is made of stainless steel with high bearing capacity. 85° bar opening angle, 60° handle opening angle..
  • [Comfortable PVC Rubber Sleeve Handle] Our toggle latch use high temperature die-casting PVC handle rubber sleeve, which is non-slip, abrasion resistant and does not hurt your hands, make it easier, comfortable and safer to use manually..
  • [Wide Application] The hand tools toggle have the advantages of accurate positioning and fast loading and unloading. They are ideal choices for vehicle manufacturing, electronics, furniture and other industries..
Check Stock