Reviews Push Type Sinter Furnaces

Bon Tool 12-178 Rub Brick - Fluted 6\ X 2\ X 2\ - 20 Grit

GIRtech USM – chamotte firebrick has improved thermal conductivity compared to traditional chamotte products..
Firebrick can be used in any type of domestic heating units, such as brick fireplaces, steel furnaces, heating stoves, barbecues and barbecue complexes, ceramics kilns and blacksmith forge..
It can be used both for arranging the hearth of the furnace and for lining the inner surface of the furnace..
Could be cutted or processed with a special tool if necessary..

【Support K/J/T/E/R/S/N Type Thermocouples Measurement】Packed with two K-Type thermocouples, this Proster Digital Thermocouple can direct measure the temperature of tested object.
【Considerable Measuring Range】Can be used to measure the temperature of liquid / vapors and surface temperature of a solid object.Also suitable to be used both in the high temperature fields of blast furnance and cookery and the low temperature measuring for liquefied hydrogen and liquefied nitrogen etc.
【High Accuracy】K-type Thermocouple Measuring range: -50~300℃.
Resolution: 0.1℃/℉＜1000°,1.0℃/℉≥1000°.
【Functional Design】Data Hold Function.
Double display with LCD Backlight shows T1/T2 and combination of T1 and T2.
【Wide Applications】Fish tank, pool, furnaces, ceramic, pottery, molten metal etc..

Alternate part numbers include 3120A357, 525-37327-000, ZC24A34-5, IES24A34-5, 24A35-5, 24A34-54, 51172-32, 33232, and 33832..
Field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. This sequencer has switches & turns on at 1-110 seconds, and off at 1-110 seconds | Timing: Contacts M1-M2 will turn on 1st and turn off last | 24 volt control circuit | Five second delay between all subsequent stages, unless they function together | UL and CSA approved.
Applications include: electric furnaces, heat pumps, gas furnaces, and oil furnaces. It is important to disconnect your appliance from the power supply before servicing..
Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific application..
SD products come in Supplying Demand packaging that includes helpful information should you have any issues..

Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
Replaces SV9500, SV9501, SV9502, SV9601, and SV9602 controls as noted below.
Ignition sequence includes timed trial for ignition.

Accuracy: ±10% (0 to 100 microns), ±6% (101 to 750 microns)..
Resolution: 0 to 20: 0.2 micron, 21 to 200:1 micron, 201–500:5 microns.
Auto Shutoff: After 10 min. if vacuum value 003e18000 microns, After 30 min. if vacuum value 003c18000 microns..
Operating Temperature: 0°C to 40°C / (+32°F to 104°F).
Storage Temperature: -20°C to 60°C / (-4°F to 140°F).
Engineering Units: microns, mbar, Pa,Torr, mTorr, psi, inHG.
Battery Life: 40 hours | Connector Type: Standard male ¼ inch.
Supply Scope: 1 Unit of Refco vacuum Gauge, Hanging Hook, T-Joint, Instruction Manual | Applications: HVAC, Biotech, Food, Freeze Drying, Vacuum Furnaces, Refrigerants, Beverage Industries, Pharmaceutical.

Temperature Range: Main Unit: -50~1300°C (-58 ~ 2372°F).
Wired Thermocouples included: -50 ~ 400°C (-58 ~ 752°F).
Stainless Steel K-type Probe: -50~700°C (-58~1292°F).
Accuracy: Reading is accurate (0.1% ±0.4°C), quick respond with K-Type Thermocouple Probes.
Differential Temperature Measurement (T1 - T2): has specially designed "T1-T2" calculation function that facilitates users to find the difference between 2 samples easily..
Easy To Use: Operate with 6 simple buttons, comes with rubber holster that protects the meter from drop impact..
Wide range of applications in Ovens, Furnaces, Ceramics, Pottery, Molten Metal, and many other industrial uses..

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or - 0.2 degrees C.
Type K thermocouple probe with 4-foot cable.
Minimum/maximum memory and 24-hour countdown timer for long-term temperature monitoring.
Calibrated to ISO 17025 traceability standards for reliability of measurements.

1/2 in. NPT x 1/2 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with fast-fast opening and 3.4 in. wc pressure regulator setting.
Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
Replaces SV9500, SV9501 and SV9502 controls.
Ignition sequence includes timed trial for ignition.

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor.
CSA certified to US and Canadian standards.
PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
maximum water temperature: 140 F, equipped with safety switch.