ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)
- ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
- This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
- EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
- Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
- The pin point is spring-loaded and retracts into handle when punching a hole.
- Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
- BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check StockWeavers Cloth for Punch Needle Embroidery (for use with Thread) - 1 Yard
- Kit contains cotton thread, and printed fabric..
- This punch needle embroidery kit gives a contemporary twist to a charming bouquet–you'll almost be able to smell these flowers when you're done!.
- Punch needle embroidery is an amazing craft for adults to destress after a long day..
- The punch needle tool and threader are sold separately. A 10'' plastic hoop is required for stitching..
Check Stock100 pc Brass Grommet 1/2\ ID Set
- Complete with tool and rustproof brass grommets for replacement or repairs in canvas or plastic. Instructions included.
- 24 per package,an inside diameter of approximately 5/16-inch.
- Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die.
- A handy, compact, economical kit complete with tools and 48 rustproof brass grommets for immediate replacements or repairs in canvas or plastic.
Check Stock
Watch Tool Kit, 149 IN 1 Watch Link Removal Tool Kit, Watch Back Remover Tool, Watch Pin Removal Tool, Watch Battery Replacement Kit, UnaMela Watch Sizing Tool Kit with User Manual and Carrying Bag
- 【Watch Repair Kit】: The watch link removal tool, includes watch link remover, spring bar tool, adjustable case opener, punch pin, hammer, watch back pry opener, screwdriver, tweezers, user manual, cleaning cloth, etc. Extra 108 spring bar, 18 watch case opener pins, 6 watch link remover pins. This watch tool kit can meet daily needs, Like replace watch band, adjust metal strap length, change watch band strap loop, clean watch strap, watch battery replacement, replace waterproof ring, etc..
- 【Adjust & Replace Watch Band】:Use spring bar tool to press the spring bar to easily remove and replace watch band. 108 pcs spring bar provided by watch band tool, suitable for 8-25mm width strap. Besides, 2 ways to adjust metal watch band length, use watch band holder fix watch band, hit the punch pin with hammer to push out link pin, or rotate the watch kit link reomver to put out band link pin. Whether home or office, use this watch band tool to complete your watchband related operations..
- 【3 Types Watch Opener Tool】: The first case type is screw down back, which placed notches on surface, use 3-jaw watch case opener, insert into the notches to rotate and open watch, suitable for 20- 60mm diameter watch. The second case type is snap off case, has smooth....
Check StockXaegistac Glock Tool Set All Metal Magazine Disassembly Tool w/Armorers Punch Tool & Front Sight Installation 3/16 Hex Tool for Glock Accessories GT08
- HANDY GLOCK TOOL KIT: 1*Mag Disassembly Tool,1* Pin Punch Disassembly Tool,1*Glock Front Sight 3/16" Hex. Compatible with Most Glock Models. A Must....
- HEAVY DUTY MATERIAL & STRONG HANDLE FOR A LONG SERVICE LIFE: All Metal Construction, Made From Machined Aircraft Aluminum with Steel Handle. Larger....
- MULTIPURPOSE MAG DISASSEMBLY TOOL (MDT): Safely and Easily Removes All Flat Bottom Magazine Base Plates for Cleaning and Inspection Without Damaging....
- GLOCK FRONT SIGHT REMOVAL & INSTALLATION COMBO Kit: 3/16" Hex Fits for Glock Front Sight Screws, Pin Punch Disassembly Tool for Removing All Pins on....
- EASY TO REMOVE AND INSTALL : An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or....
Check Stock2-in-One Drip Irrigation Tubing Hole Punch Fitting Insertion Tools Drip Tube Hole Punch for Easier 1/4' Inch Fitting & Emitter Insertion (Pro Punch Tool Sets)
- Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
- Irrigation pipe puncher can be used to perforate polyethylene pipes for installation of drippers and micro nozzles.
- suitable for PE pipes with a diameter of 16/20 mm..
- 2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use..
- About size: Punches Holes measuring 3 mm (0.118 Inches) for a snug fit to eliminate waste loss and maintain appropriate pressure in your drip system..
- The package includes: 1 professional punch tool, 1 2 in 1 punch and accessory inserts. One-stop shop to meet your needs, this is a good tool for gardening and irrigation.
Check Stock
DIY Personalized Magnet Kit - Design & Make Your Own Magnets (24 Magnets, 24 Caps, and Hole Punch Included)
- TURN ANY LOGO INTO A MAGNET – Print your logo, cut the image out with our image punch tool, place the image on top the magnet, & attach the plastic cover. Voila! Your own logo magnet!.
- DIY KIT INCLUDES 24 MAGNETS, PUNCH TOOL, & 24 IMAGE COVERS – Our magnet crafting kit is the perfect DIY crafting kit! It’s simple and easy to use with everything ready to go right from the package!.
- PERSONALIZED MAGNETS KIT EASY & FAST – Use our magnet kit to create custom magnets that are ready in minutes! Perfect for crafting with friends, promoting your business, party favors & more!.
- A FUN CRAFTING KIT FOR KIDS & ADULTS – With our diy magnet crafting kit you can turn any image into a magnet! No need to order online do it all right from home and see the results in minutes!.
- 100% MONEY-BACK GUARANTEE – If these DIY magnets don’t live up to your expectations, don’t worry. You can send them back for a full, complete refund of every penny you paid. You take NO RISK when you purchase with us today..
Check Stock
Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems
- What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using.
- Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
- 2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
- About size: the punch hole measures approx. 3 mm/ 0.118 Inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials.
- Please confirm whether it meets your needs before buying.
- How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
- Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.
Check StockThe Beadsmith EZ-Rivet 3/32' Rivet Tool Kit Punch-and-Flare Hollow Rivets, T-Bars, Piercing and Flaring Bases. Jewelry Supplies
- RIVET PUNCH: Our screw puncher has a piercing base measuring 2.38 mm (3/32") in diameter..
- DURABLE DESIGN: Our heavy-duty rivet puncher is made with hardened steel for making precision holes..
- VERSATILE TOOL: Punch holes in metal up to 18 gauges for easy cold connections..
- PERFECT HOLE: With the hole-punch rivet tool, get a perfect hole without deforming the materials..
- PROFESSIONAL QUALITY: Our high-quality design punch is perfect for your jewelry-making kit..
Check Stock 
