Reviews Pump Pressure Pump

SHURFLO WASHDOWN Pump KIT Blaster II 3.5

  • TOUGH, RUGGED, HIGH PRESSURE: The ProGear 5550 Power Blaster Water Pump was designed with a unique 5 chamber diaphragm and internal by-pass for longevity and performance. High Pressure when you need it where you needit. Our pump is built for high pressure on demand, low noise and no rapid cycling. No fear, this pump can run dry with no water, runs quiet, and thermally protected..
  • HIGH PRESSURE AND HIGH SPEED. Use for Power Spraying: Boats, Fish Boxes, Anchor Wells, Dinghies, RV’s, Patios, Decks,.
  • HEAVY DUTY: Our heavy duty, Professional Grade 12 Volt DC self-priming pump provides up to a 14 foot lift, quiet operation and is CSA Certified. We stand behind our products and the ProGear 5500 High Performance water pump is backed by a 2-year no hassle warranty..
  • MADE IN AMERICA: This water pump is proudly made in the USA using high quality, tough, durable, and long-lasting parts. SATISFACTION GUARANTEED.
Check Stock

LEZYNE ABS-1 Pro Chuck Red/Hi Gloss HP

  • ✔ 【NEW GENERATION HANDLE BAROMETER】: The bicycle pump with pressure gauge adopts upgraded handle barometer, Thickened handle is stronger and....
  • ✔ 【NEW GENERATION REMOVABLE PARTS BOX】: Toolitin bicycle pump bike floor pump uses a unique protective shell design, Place the valve fitting in....
  • ✔ 【STABLE AND DURABLE ANTI-SLIP BASE】：The widened hard plastic base of the bicycle pump has Anti-slip silicone, light weight, easy to use,....
  • ✔【PRECISION HIGH PRESSURE 180PSI】: The ours pressure of our bicycle pump with gauge can reach to 12 BAR / 180 PSI。You can inflate faster and....
  • ✔【MULTI-FUNCTION USE】: Save time and effort,Toolitin bike tire pump can inflate for bicycles,automobile，electric vehicles, motorcycles, air....
Check Stock

Aquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, includes pump, pressure switch PSW-240, transformer, 6840-2J03-B224 B221 Made In USA

  • This pump kit includes Aquatec pump 6840-2J03-B224 with heavy duty steel base plate with damper, PSW-240 pressure switch, transformer 110V USA plug, 1/4″ inlet/outlet for pump and pressure switch, detail instruction.
  • This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 100 GPD (gallons per day) RO systems Most home drinking RO systems are under 100 GPD.
  • Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank..
  • This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine..
  • This kit is NOT for misting, ice maker line, line boosting, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system.
Check Stock

mistcooling 250 PSI Misting Pump

  • ...e – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on....
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

uxcell Stainless Steel Float Switch for Water Pump Tank swim pool garden pond Liquid Water Level Sensor M11 162mm Length

  • MATERIAL: It is made of high quality material, with long serving life.
  • EXCELLENT PERFORMANCE: It has the function of water shortage protection of water pump. Automatically start and close the pump according to the set pressure.
  • APPLICATION: Self-priming pump, jet pump, garden pump, clean water pump, centrifugal pump, etc. This water pump pressure switch is applicable for clean water source.
  • Voltage: 220~240V, Frequency: 50/60hz, Starting pressure: 1.0Bar, 1.5Bar, 2.2Bar.
  • VIP SERVICE: As a reliable seller, if you are not 100% satisfied with the quality of the product, pls feel free to contact us and let us know about the issue, you will be assisted ASAP, customer satisfaction is on our top priority.
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock

Dskeuzeew Rechargeable Paddle Board Pump - 9000mAh Electric SUP Air Pump 20PSI High Pressure with Dual Stage Inflation, Deflation, Auto-Off, Portable Air Pump for Inflatables Paddle Boards, Boats

  • Mini But Fast Inflation - Dskeuzeew PADDLE BOARD PUMP adopts dual-stage inflation (1st stage airflow is 410L/min, 2nd stage is 90L/min), the max pressure is up to 20 PSI, takes only 10 mins to inflate a paddle board from 0PSI to 15 PSI, Faster and More Powerful. Equipped with deflation modes, deflates the SUP completely into a sheet in 5 mins for easy roll up and storage. SKIP THE WAIT TIME and HAVE FUN NOW.
  • Rechargeable & Portable - Built in 9000mAh high-efficiency rechargeable lithium battery, easy and fast to inflate and deflate up 4 paddle boards. Different from the style of directly powered by the car, Dskeuzeew air pump for inflatables battery powered brings a more convenient experience. No Need to Park The Car On The Beach Anymore, Get Rid of The Shackles of Cord - You Can Take The Air Pump Anywhere.
  • Real-Time Monitor & Auto-off Function - JUST FREE YOUR HANDS. Rechargeable air pump built-in air pressure monitoring feature with LCD display. You can set the desired target pressure (range 0-20 psi, accurateness 0.01 psi) and paddle board pump electric portable will auto-off to prevent over inflation when the pressure reaches the preset pressure val....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock