Reviews Pulleys For Boat Covers

Solim 16FT Jon Boat Cover 800D PU Waterproof Heavy Duty Mooring Cover Marine Grade Polyester Canvas Trailerable Replacement for Jon Boat 16 Long Beam Width Up to 75 in Gray

  • ...t cover (No fade problem). We have thickened the PU coating, which has a water resistance standard of 3500pa. Our Jon boat cover can provide long-term protection for your ship without worrying about ultraviolet rays, rain, snow and other bad weather..
  • 『Secure Quick Release System』All of the seams on our Jon boat covers are double stitched to ensure water stays out and does not tear easily. Integrated buckle and adjustable strap tightening system provides easy installation and quick release. Make you easily lock the lid on the boat to prevent it from blowing away. All-around bottom elastic hem ensures a 360 degree tight fit for secure and snug fit..
  • 『16FT Package Included』13 x adjustable traps, 1 x free storage bag, 1 x 800D PU Jon boat cover waterproof (Length: up to 16ft Beam width: up to 75inch). Designed for extra durability and all-weather protection as well as rugged heavy duty safe storage. The boat cover for Jon boat also comes with storage bag and trailering straps. This heavy duty waterproof Jon boat cover is perfect for boat storage, mooring and trailerable..
  • 『100% Satisfaction Service』At Solim, we provide 12 Months Warranty for any quality-related issue. If you have any problem with the flat bottom Jon boat covers, please send us ....
Check Stock

GM CLIMBING 32kN Large Rescue Pulley Single/Double Sheave with Swing Plate (Black - Single Pulley)

  • These Single/Double Rescue Pulleys are great choices for anyone who need a quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
  • For hauling big load, large pulley is much more better and easier..
  • Mounted with ball bearing for higher efficiency and smoothness. Swing side for easy and rapid rope installation and remove..
  • Rating to 32kN / 7100lbs for high durability to satisfied all your requirements, like pulling a standed boat,hauling some out of a crevass, etc..
  • Compatible with textile ropes up to 16mm (5/8"). Multiple anchors for complex rescue / hauling system setup..
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

Heavy Duty Snap Fastener Tool Adjustable Snap Setter Tool Includes 20 Sets 15mm Snaps for Boat Cover, Replacing Metal Snaps, Repairing Boat Covers, Canvas, Sewing, Tarps

  • 【More comprehensive】:You can save a Hole Punches if you buy our snap setter tool!HAPDEN adds a punching die,allowing you to complete all projects on one hand tools.Helps to major or minor repair of canvas covers,tarps,boat covers,sail covers,bimini tops,tonneau covers or any heavy fabric..
  • 【More efficient】:Now you can install the snap button without removing the items.Compared with the heavy and bulky desktop products in the past,it is now easier to carry.snap tool for boat covers comes with extra fasteners - 10 Set button snap studs,10 Pcs screw with Phillips head, 10 pads for snap caps..
  • 【More Stronger】:snap fastener kit body is phosphated galvanized,and the surface is more wear-resistant,more stain-resistant,and harder.The dies on the head of the pliers is additionally heat-treated to make it more robust and durable..
  • 【More effortless】:Adjustable pliers design enables greater leverage over die-and-peg snap tools,the vice grip system allows you to get good leverage to crimp the two pieces together..
  • 【More worry-free】:We are so sure you’ll be happy with your ....
Check Stock

Tuszom 800D Boat Cover Marine Grade Polyester Canvas Trailerable Full Size Boat Cover for V-Hull Runabouts Outboards and I/O Bass Boats

  • 3 Years Warranty: Please email us for any problems(cover rips, tears.) We will ship you a NEW REPLACEMENT! Fish & ski boat covers Pro-stytle Bass boats Covers V-hull Runabout Outboards & I/O Covers， please refer to Tuszom Boat Cover Size Measurements to find the right size for your boat；800D Motor cover included(size:29x17x29inch, fits boat motors up to 150 HP), could also used as storage bag.
  • 100% Waterproof: 800D Marine Grade Polyester Canvas + waterproof PU coating + anti-UV coating, can withstand up to 2000pa Water pressure.
  • Additional, Inner Waterproof tape at seams Prevents Water leaking.
  • Please use SUPPORT POLE beneath the cover, avoid water accumulate!.
  • Tear-resistant and UV resistant: The higher the D value, the thicker the yarn and the thicker the fabric is! 800D is way heavier canvas than 600D /420D /300D.
  • Double stitching, bow is double reinforced, and won't tear easily at the sharp “elbows”.
  • Anti-UV ability increased by 40%, avoid aging, disintegration and tearing due to exposure to the sun.
  • Upgraded Towing and Mooring features: The widened 1.5" webbing ring is secured with 4 stitches,the force is better to avoid the loss of the webbing ring.
  • The Boat cover comes with more 11+6 pcs tie-down straps and buckles than the compet....
Check Stock

YimSting Center Console Boat Cover 17-19 ft Upgraded 900D Heavy Duty Waterproof Boat Cover for Center Console Boat 17ft 18ft 19ft Marine Grade Canvas Gray

  • ... for two, saving you money. YimSting heavy duty boat cover is specifically designed to fit a V-Hull Center Console which is from 17' to 19' with a beam of 102", low or no bow rails, perfect for long-term storage, mooring, or trailering..
  • 【HIGH QUALITY & GOOD SERVICE】YimSting Upgraded 900D Center Console Boat Covers will last 2 to 3 times longer than most other boat covers thanks to its abrasion, UV, waterproof, and good breathability. We offer up to a 2 year warranty, so buy with confidence. If you have any problem or question, Please feel free to contact us..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Tuszom 100% Waterproof Boat Cover 800D Marine Grade Polyester Canvas Trailerable Full Size Boat Cover for V-Hull Runabouts Outboards and I/O Bass Boats

  • 3 Years Warranty: Please email us for any problems(cover rips, tears.) We will ship you a NEW REPLACEMENT! Fish & ski boat covers Pro-stytle Bass boats Covers V-hull Runabout Outboards & I/O Covers， please refer to Tuszom Boat Cover Size Measurements to find the right size for your boat；800D Motor cover included(size:29x17x29inch, fits boat motors up to 150 HP), could also used as storage bag.
  • 100% Waterproof: 800D Marine Grade Polyester Canvas + waterproof PU coating + anti-UV coating, can withstand up to 2000pa Water pressure.
  • Additional, Inner Waterproof tape at seams Prevents Water leaking.
  • Please use SUPPORT POLE beneath the cover, avoid water accumulate!.
  • Tear-resistant and UV resistant: The higher the D value, the thicker the yarn and the thicker the fabric is! 800D is way heavier canvas than 600D /420D /300D.
  • Double stitching, bow is double reinforced, and won't tear easily at the sharp “elbows”.
  • Anti-UV ability increased by 40%, avoid aging, disintegration and tearing due to exposure to the sun.
  • Upgraded Towing and Mooring features: The widened 1.5" webbing ring is secured with 4 stitches,the force is better to avoid the loss of the webbing ring.
  • The Boat cover comes with more 11+6 pcs tie-down straps and buckles than the compet....
Check Stock

Taylor Made Products 9036 Fleece Boat Fender Cover for Center Rope Tube Style Fenders (10' x 26', Navy Blue)

  • ULTIMATE PROTECTION—Our fleece fender covers offer double protection-they protect your Center Rope Tube fenders, and they protect against any marring or scaring of your hull. You don’t have to worry about any color transfer or other damage to your hull.
  • DURABLE — Made with 100% polyester 12 oz. Blizzard Fleece, our Taylor Made fleece fender covers are a denser material that is soft and thick and will offer you long-term protection for your vessel and the fenders-boaters rely on these high-quality covers.
  • SIZED RIGHT — Our fender covers are available in navy and black and come in two sizes -8” x 20” and 10” x 26”- sure to fit your Center Rope Tube fenders.
  • UNRIVALED QUALITY — Engineered and designed for the marine industry, our fender covers for boats are made with the highest quality from the marine brand who sets the design standard. Easily protect your fenders with these premium fender cover.
  • MADE IN THE USA — Built in the USA, boaters know they can trust our boat fender covers to deliver the durability and quality they can rely on when they’re on the water giving the ultimate protection your boat needs.
Check Stock