Reviews Pu Air Tube

Lekit Misters for Outside Patio 27.5FT(8.4M)+8 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable Outdoor misting Cooling System for Garden, Waterpark, Greenhouse, Backyard

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

TAILONZ PNEUMATIC 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight 40 pcs

  • 【Product Name】1/4 ‘’ Plastic Push to connect fittings (40Pcs).
  • 【Fluid Type】Air Only【Applicable Tube】Pu/Nylon/Soft PE tube.
  • 【Pressure Range】0~145Psi【Temperature Range】0-60°C | 32～140°F.
  • 【Advantages】High pressure resistance, easy installation and long service life..
  • 【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4\ Tube OD x 1/8\ NPT Thread

  • Made of quality plastic and stainless steel for durable use.
  • Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
  • Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
  • Working Temperature: 0-60°C | 32～140°F.
Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4 Tube OD x 1/4 NPT Thread

  • Made of quality plastic and stainless steel for durable use.
  • Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
  • Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
  • Working Temperature: 0-60°C | 32～140°F.
Check Stock

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

  • Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
  • Fluid Admitted:Air Vacuum Water (no freezing).
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
  • Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

Misters for Outside Patio 63FT(19.2M)+21 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable outdoor misting cooling system for Garden, waterpark, Greenhouse, Backyard, Fan, Umbrella, Deck, Canopy

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

100 Pieces Air Hose Fittings Air Line Fittings Straight Push to Connect 4 6 8 10 12 mm Quick Release Pneumatic Connectors Plastic Straight Tube Connector Push to Connect Fittings for Tube

  • Reliable Material to Serve: tube fittings are made of quality PU and plastic, with high pressure resistance, hard to trip out, not easy to deform or break, suitable for long lasting use.
  • Easy to Use: you will get 100 pieces of air hose connectors, which are easy to install or remove, with the push in design to connect the tube easily, quick and safe, the enough quantity will suffice your spare parts needs.
  • Flexible and Straight: air line fittings are flexible and simple to rotate as needed, with ellipse ring design, no other tools needed, just give a little push, time saving and energy saving.
  • Wide Applications for You: air fittings are suitable for many usages, such as industries automatic production equipment, like machinery, automobile, electronics, packaging, and so on, bringing a fluent use experience.
  • Proper Size to Fit: the 100 pieces air hose connector fittings are in 5 diameters, 20 pieces for each diameter, and the diameters include 1/4 inch, 5/32 inch fittings, 5/16 inch, 3/8 inch and 1/2 inch fittings, to meet your various demands and assorted applications.
Check Stock

QZJLHH Seat Cushion Pillow for Office Chair Ergonomic Butt Cushion for Desk Chair Memory Foam Desk Chair Pad for Back Tailbone Pain Relief (Color : C)

  • The ergonomic office chair back provides perfect support for your back and neck, allowing you to maintain a correct sitting posture and relieve back stress and pain during daily use..
  • PC thickened seat surface, crystal clear, simple and beautiful, crystal clear seat surface, more refreshing in summer.
  • The cushion is made of high-density sponge in high-quality leather, the leather is high-quality and wear-resistant, and does not peel off! The sponge is moderately hard and comfortable.
  • SGS certified anti-fall air rod thickened wall tube, high-strength alloy air rod, after many lifting experiments and tests, safe and stable!.
  • Nylon PU wheels are non-slip and abrasion resistant, PU edging mute chair wheels, stable and unimpeded, care for the floor.
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock