Reviews Ptfe Work Wear

CSFMC Teflon Furniture Sliders Pads(24 Pack 3/4 inch(19mm) Base),Table/Chair/Cabinet/Sofa Small Size PTFE Glides,Stainless Steel Screw on Protect The Floor,Heavy Duty Sliding Block for Furniture

  • ✅ Wide range of applications>>>>>3/4 inch(19mm)Base diameter.Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground, which will damage the PTFE layer..
  • ✅ Protect your floor>>>>>Bottom of 5.5 mm thick, protect your solid wood, tile floor and carpet, etc…Clever design, Stainless steel screw on installation, no rust.with a metal gasket embedded in the middle to prevent it from falling off..
  • ✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture slides.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
  • ✅ Packing specification >>>>>You’ll get 24 pcs furniture slide pads. Now you can move your furniture around easily and quietly without hurting the floor..
  • ✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well..
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

CSFMC Furniture Leveler PTFE(Teflon) Bottom(28mm Base 1/4-20,8 Pack),Threaded Shank Adjust Pads,Table/Chair/Cabinet/Sofa Medium Adjustable Legs Leveling,Nuts Installation and Floor Protection

  • ✅ Keep your furniture from rocking>>>>>The adjustment slider can be adjusted from 3/8 to 1.25 inches.Let your furniture never look like a drunk again..
  • ✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well.Move furniture will not damage the floor, and quiet.protect your solid wood, tile floor and carpet, etc....
  • ✅ Strong feet support>>>>>1/4-20 x 1.5 inches High strength bolt.An antirust plating surface.More than 200 pounds of support per leg..
  • ✅ Wide range of applications>>>>>Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground when sliding, otherwise the PTFE layer will be damaged..
  • ✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture sliders.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • [Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
  • [Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
  • [Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
  • [Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
  • [Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
Check Stock

ADVANGENE Syringe Filter Sterile, PES, 0.22um, 13mm (75/pk)

  • HYDROPHOBIC PTFE SYRINGE FILTERS - Virgin PP housing with Hydrophobic PTFE membrane. Diameter: 13mm, Pore Size: 0.22μm, 100Pcs..
  • UNIFORM PORE SIZE - PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
  • PREMIUM PERFERMANCE - It Can be autoclave, sterilize at 121°C/249.8℉ for 45 minutes, it with broad chemical compatibility and strong chemical stability and inertia..
  • STURDY & DRUABLE - The syringe filters fit well, securely and durable, have reasonable flow for the filtration size, PTFE syringe filters are wall marked, when working with different requirements for filtration to be able to quickly discern which ones are being used..
  • APPLICATION WIDELY - PTFE Syringe filters are broadly used infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions, perfect for hydrophobic, even such as culture medium, liquid cultures and grain spawn jars..
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ... as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referrring to our 7th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: ....
Check Stock

2mL Autosampler Vials with Caps, HPLC Vials, 9-425 Amber Glass Vial with Blue Screw Caps/Writing Patch/Graduation, White PTFE & Red Silicone-100 Pcs

  • ...ce. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling..
  • 【Sealed Design】Autosampler glass vials with unique screw design ensures the consistency of the seal.Includes silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples..
  • 【Improve Work Efficiency】HPLC Sample Vials with large writing patch for sample idification and white printed graduations in 0.5ml increments.The category and usage amount are clearly visible.Therefore, time is saved and work efficiency is improved..
  • 【Wide Range of Applications】Our vials with caps are suitable for various automatic samplers for thin neck bottles, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc.Widely used in standard HPLC and GC applications..
  • 【Packing List】2ml Clear autosampler vial, 12mm Diameter, 32mm Height, 9-425 screw top.500 Pcs/Pack. If you have any qestion, please feel free to contact us, we will respond within 24 hours and try our best to solve it..
Check Stock