Rectorseal 23431 Pint Brush Top T Plus 2 Pipe Thread Sealant
- Non-hardening thread sealant containing PTFE plus synthetic fibers.
- These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.
Check Stock6ml High Density Polyethylene Vial, Push-On Caps, Bulk Packed, 2000 per Case
- Full height partitions minimize breakage.
- Measures 28mm outside diameter by 57mm height.
Check StockReplacement for Professional 213-4514 Engine Coolant Temperature Sensor 12-Month Warranty
- Compatible with all GM LS series engines.
- Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE，and 1 steel braided hose ..
- Can be installed on the front or rear of the cylinder heads.
- not compatible with FAST 102 intake manifolds.
Check StockEVIL ENERGY 6AN Male Flare to 1/4\ NPT Pipe Fitting Adapter Aluminum Straight Black 2Pcs
- Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
- Material: Made of aluminum alloy 6061-T6, anodized black surface..
- Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
- 1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
- EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check StockBBQ funland 21 Inch QCC1 Hose and Regulator Kit with 1/8 NPT Male Thread Replacement Parts for Weber Propane Grills
- 21 Inch QCC1 Hose and regulator with 1/8" NPT Male Thread fits Spirit 500 & 700, Genesis 1000-5000, and Platinum I & II gas grills.
- Fits Weber models Spirit 500 and 700, Genesis 1000 through 5000 and Platinum I & II gas grills.
- SAFETY &CORROSION RESISTANT- Long lasting 100% Solid Brass Construction fittings,Provides secure, airtight connection between grill or fire pit and....
- Please Note: The end is 1/8" NPT Male Thread NOT female. Does not fit current weber grills requiring a 3/8" female flare connection.
- Includes 21-Inch QCC1 hose, regulator. Suggest using PTFE Tape or adhesive to avoid fuel leaks.
Check Stockmxuteuk 5pcs Push to Connect Tube Fittings Copper Pneumatic fittings Male Straight push in air hose fittings 3/8 Tube OD x 3/8 NPT Thread
- 【Type】Quality Pneumatic Male Straight.
- 【Material】mxuteuk Pneumatic fittings are Made of Quality plastic and stainless steel for durable use.
- Thread Coated with PTFE, offering good seal property，the joint can 360 degree rotation, Simple and dexterous；.
- 【Working Temperature】0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC.
- 【Package Content】5pcs x Straight Push-in Connect Fittings.
Check Stock
30 Rolls Thread Seal Tapes, Teflon Tape 1/2 PTFE Pipe Sealant Tape Industrial Thread Sealants Plumbers Thread Tape for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe, 1/2\ x394\ White
- HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
- PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
- GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
- EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
- WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..
Check StockCreal Genuine Capricorn Tubing 1 Meter XS Series 1.75MM Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3Pro Ender 5 CR-1010S 3D Printer
- ( Bowden Tubing)100 percent Genuine Capricorn Bowden PTFE Tubing..
- (High Temperature Resistant) High Temperature Resistance due to using only the highest quality Capricorn PTFE. Our tubing will operate at even higher....
- (Lower Friction) High lubricity additives make XS Series Capricorn tubing the lowest friction bowden on the market. It developed specifically for....
- (Professional accessories)PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and....
- (Upgrade Your 3D Printer)-- Premium XS Capricorn bowden Tubing is officially authorized and d quality.Using Original XS Series tubing make less....
Check StockThomas 91302 Borosilicate Glass 40mL Clear Precleaned Tomcap Vial, with Liner (Case of 72)
- 40 mL capacity EPA V.O.A. vial in clear borosilicate glass.
- Unique liner shape mechanically locks into closure, preventing contamination from dropped liners.
- Available as pre-cleaned to EPA protocol B.
- Provides specified (0.120" silicone with 0.005" PTFE) liner thickness.
- Prevents closure cracking or stripping resulting from inadequate bottle/closure thread contact.
Check Stock 
