Reviews Ptfe Gaskets Machine

High Temp Tape, FORTSPANG PTFE Coated Fiberglass Teflon Tape, High Temperature Adhesive Tape, Drying Conveyor Belt; Welding Sealing Tape Heat Resistant Up to 300℃ (50mmx10m)

  • 【Material】Teflon tape / PTFE roll with self-adhesive back. Width: 50 mm.
  • 【High quality】Our Teflon tape is pressure-resistant, corrosion-resistant, abrasion-resistant, high-temperature resistant, smooth surface, low-friction. High temperature resistance from -196 ° C to 300° C..
  • 【Widely used】Ideal for a variety of home and commercial projects such as high speed sealing machine, food packaging, hot melt machine, 3D printing, high temperature powder coating, etching etc..
  • 【Easy to use】Simply pull the tape off the roll and place it in the right place. Self-adhesive Teflon tape is easy to apply and remove without leaving any residue..
  • 【Make sure the equipment runs smoothly】Pressure-sensitive silicone adhesive tapes offer excellent drainage properties and non-stick coated surfaces, replace deteriorated or burned-out Teflon tape / PTFE tape so that machines and equipment can run smoothly and efficiently..
Check Stock

8 Roller Stainless Steel L-P-G Chimney Cake Baking Machine, Kurtos Kalacs Ice Cream Cone Roller Chimney Cake Oven, Lpg Gas Bread Roll Machine for Commercial or Home Use

  • ★【High Quality】The whole machine is made of high-quality stainless steel, beautiful and durable, easy to clean. It can keep the machine running stably for a long time. It is very suitable for commercial use or family gatherings..
  • ★【Precise Temperature Control】Precise timer and temperature adjustment knob. LED lights indicate the heating status in real time. When the waffle is ready, it will sound a clear and sweet alarm, so there is no need to guard it by the side..
  • ★【Independent Heating Zone】The heating zone is separated from the control zone to eliminate the risk of scalding. The sturdy and smooth joint between the two pans provides reassuring use. Four foot pads keep the machine stable..
  • ★【Easy to clean】The surface of the inner tank is coated with PTFE coating. The non-stick PTFE coating can better shape and keep your place clean and tidy without spending a lot of time cleaning. After use, use a rag It can be cleaned easily..
  • ★【Enjoy the Delicious】Commercial Electric Takoyaki Maker is specially designed for delicious takoyaki. It has a unique flavor, endless aftertaste and attractive aroma. It is a great choice for bakeries, restaurants, snack bars, canteens, etc..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

6FT Washer Stainless Steel Hoses with 90 Degree Elbows - 6 Ft Long Burst Proof Water Supply Lines for Washing Machine Hot and Cold Striped Water Supply Lines (2 Pack)

  • ... Universal type: The 6 ft washer hoses can withstand pressures up to 1500psi and is compatible with most washing machines and water tanks. The flexible universal washing machine hose can be easily connected to the laundry room or ordinary household water supply lines. Elbow space saving design allows gaskets to be installed close to the wall.
  • High-end design: Each laundry hose has three layers of thickening protection: ❶304 material encrypted stainless steel braided layer: wear-resistant, UV-resistant ❷fiber explosion-proof layer: exquisite weaving process, pull-proof, explosion-proof ❸high-quality PVC core: safe to use, anti-aging, resistant to corrosion. The clothes washer hoses are pre-installed with gaskets to ensure watertightness.
  • Easy installation: 3/4" female thread easily attaches to your washing machine, the 6-foot-long structure provides the flexibility of the washing machine hose. Solving customer problems is always our aim.
  • Warranty support: All washer hoses are 100% leak tested to ensure consistent quality you can trust. The quality of the hose has been certified at home and abroad, s....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock

MAHLE GS33593 Engine Cylinder Head Dowel Pin

  • MAHLE Original gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets.
  • MAHLE Original gaskets is the leader in Domestic, Asian and European applications.
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package.
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referrring to our 7th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than Creality ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust the hot bed to be higher to fit the springs.).
  • ✔️【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly cause our customer service will respond to you within 24 hours no matter what question..
Check Stock