Reviews Psi Tour Iron Specs

Beduan Air Pressure Control Valve Regulator with Gauge Solid Brass Construction 140 PSI

DESIGN: The EB75 is intended for use where inlet pressure does not exceed 300 PSI.
Suitable for cold or hot (to 180 degrees Farhenheit) non potable water service.
IRON BODY: Compact, iron-body pressure reducing and regulating valve.
BACK PASS CHECK: Allows water to flow back through the regulator in cases of thermal expansion caused by hot water heating devices.
DESIGN: EB75 FPT X FPT Cartridge based design, 10 PSI - 70 PSI range.
MADE IN THE USA: Prepared and tested in the Alabama.

BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS.
Specs:2800-3000 PSI / 2.4 GPM – MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4″ SHAFT HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
**Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
UNIVERSAL PUMP – FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE.

... in walk mode, and absolutely secures the cuff to the boot when you switch to ski mode..
It's a fact that the Tecnica Zero G Pro Tour was one of our quickest to sell last season. It is also a fact that they ski like an alpine boot and tour like the best lightweight uphill touring boots. So, get them while they last!.

Multi-Material Body: Engineered Muscle Plate.
This club draws its inspiration from Tour Pros.
It will provide golfers with high, explosive launch but with a refined design.
It looks more like an iron in feel and sound, D18 Density Tungsten.
Built to allow golfers to reclaim their long iron game comes the Titleist U505 Utility Iron.

Due to unprecedented demand across the industry, causing a shortage of shafts and grip, we may need to substitute for an equivalent premium shaft/grip..
Precisely shaped by Callaway Chief Designer Roger Cleveland for a beautiful look and extraordinary feel from 8620 mild carbon steel..
The new tour-tested w and C grinds are both updated to make it easy to play a wider variety of greenside shots..
Head shaping progresses from traditional shaped lob and sand wedges to a compact player preferred design in the gap and pitching wedges for a seamless transition into an iron set..
Stock shaft options include true Temper Tour issue 115 (steel) and project x Catalyst 80 (graphite). Stock grip is lambkin's UTX in black/blue..

The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.

...des mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems.
Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free Flow LPH: 416 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8" NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8" NPT | Product Type: Fuel Pump | Pump Body Color: Silver.

...ercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
- 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
- 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..