Reviews Protection Tubing

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • ...nd high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our store, like 3/4", 1" ,1.5", 2". our worry-free 24-month and friendly customer service ensure pleasant shopping experience....
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

mistcooling Outdoor Misting Fan System 18\ Fan - High Pressure (18\ - 2 Fans Black)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

2 Pcs 1 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black & Red)

  • ...nd high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 1" in diameter large heat shrink tubing black and red (Note: it is 1" in round diameter, but not 1" in width). Other sizes also available in our store, like 1/2", 3/4" ,1.5", 2". our worry-free 24-month and friendly customer service ensure pleasant sho....
Check Stock

Nilight - 50027R 250 PCS Heat Shrink Spade Connectors Quick Disconnect Wire Connectors Electrical Spade Terminals Heat Shrink Fully Insulated Male and Female Wire Spade Connectors,2 Years Warranty

  • Premium Components: Each spade connector is crafted from high quality copper, and dual wall heat shrink tubing with adhesive lining. These wire....
  • Strong Crimps: Thick copper barrels can be crimped tightly on any wire. Heat shrink tubing adhesive seals the wire for enhanced protection from....
  • Quick Disconnects Where You Need Them: Make connections that can be disconnected in seconds. Use these spade quick disconnects in boat, car,....
  • Durable and High Quality - The Thicker tubing barrel allows for a strong crimp every time. The Durable Copper core and adhesive lined tubing prevents....
  • Package include: 250 heat shrink male and female spade connectors. Fit any wire from 22 to 10 AWG..
Check Stock

ARIES 1050 1-1/2-Inch Black Steel Grille Guard No-Drill Select Jeep Wrangler

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of....
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter,....
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum....
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This....
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Jeep Wrangler.
Check Stock

ARIES 1051 1-1/2-Inch Black Steel Grille Guard No-Drill Select Jeep Liberty

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of....
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter,....
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum....
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This....
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Jeep Liberty.
Check Stock

ARIES 3065 1-1/2-Inch Black Steel Grille Guard No-Drill Select Ford Explorer

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of....
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter,....
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum....
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This....
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ford Explorer.
Check Stock

ARIES 3063 1-1/2-Inch Black Steel Grille Guard No-Drill Select Ford F-150

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of....
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter,....
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum....
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This....
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ford F150.
Check Stock