Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock

Professional Multi-System Auto Diagnostic Tool iCarsoft MB V2.0 Compatible for Mercedes-Benz / Sprinter / Smart, ABS SRS Oil BLD INJ

  • iCarsoft MB V2.0 scanners mainly works on OBD II Mercedes. MB V2.0 can work on engine system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin black adapter for conversion. MB V2.0 can work on multi-system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin red adapter for conversion..
  • iCarsoft MB V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

Launch X431 V (X431 PRO) 8inch WiFi/Bluetooth Full System Diagnostic Tool support injector coding and Key coding, 2 Years Free Update

  • ...on sleeve to prevent it from being damaged.
  • EXTENSIVE VEHICLE COVERAGE+MULTI-LANGUAGE: X431 V can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China, up to 93 car brands, up to 10000 car models. Full range car models and full car system diagnose make it a professional automotive diagnostic tool. Language:English, German, Japanese, Russian, French, Spanish, Russian,Arabic ,Korean Traditional Chinese etc are available to choose..
  • Covered All Popular Functions in a Repair Garage : Injector Reset,Fuel Pump test, Purge Control Solenoid,Oil Reset Service, RESETIMMO,SRS,Steering Angle Calibration ,Electronic Parking Brake Reset ,Battery Register/Battery Maintenance,ABS Bleeding, Electronic Throttle Position Reset/Learn, DPF Regeneration, Electronic Parking Brake Reset,Tire Pressure Monitor System Reset, Steering Angle Calibration and so on..which is very suitable for garage and mechanics..
  • ONE KEY UPDATE: Download or update multiple vehicle diagnosis software any time and any where freely just click One Key Update, No lP limited! Through the Bluetooth communication between vehicle diagnostic connector and variant mobile intelligent terminals, it achieves X-431 series full car model and full sys....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...ssing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

DNA MOTORING TOOLS-00243 24-pcs Disc Brake Caliper Piston Compressor Wind Back Repair Tool Kit for Cars, with Carrying Case,Red

  • ... are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off. Highly precise forging and molding help these parts work effectively without damage to your brake pistons..
  • CONVENIENT STORAGE - This Professional Disc Brake Caliper Tool Set can easily store in one hard storage case with handles that is easy to carry and compact for convenient storage. A Essential tool kit for any garage, DIY or professional automobile maintenance..
  • PACKAGE INCLUDES - [18] Adapters for popular car brands.
Check Stock

Brake Bleeder Kit Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Brake Bleeder Adapters Reservoir Hoses for Brake Fluid Power Steering Handdeld Vacuum Pump Brake System Bleeding Tools

  • UNIVERSAL BLEEDING KIT: Orion Motor Tech's vacuum bleeder with an adapter set works with nearly any vehicle's system and lets you bleed your brakes,....
  • SUPERIOR DURABILITY: The easy-to-use brake bleeder pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized....
  • HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
  • WIDE APPLICATION: Not just for bleeding brakes, this brake bleeding kit also clears oil, power steering fluid, and other hydraulic systems.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this brake fluid bleeder kit with strong 1 year warranty and our usual friendly 24/7 customer service,....
Check Stock