Reviews Process Temperature Controller

Bookmarker 2

  • A Complete Cutting Kit: the package contains 1 piece of temperature controller, 1 roll of heating wire, 1 piece of cutting handle, 1 piece of bow hot blade, 5 pieces of wand style hot blades of different lengths, together with 1 piece of marker, a complete set to meet your needs on various occasions. Before use, you must read the manual before use.
  • Easy to Use: the styrofoam cutting tool is convenient for you to use, just connect the power adapter to the power socket of the foam cutter, and then power on for safe use.
  • It is recommended that you heat it for a while before using it and take a rest after working for 30 minutes. The adjustment range of different lengths is different, if the power light flashes, the adjustment is too large and needs to be adjusted according to the instructions.
  • Efficient Cutting: our electric hot wire foam cutters are equipped with 1 temperature controller to adjust the temperature, the tube can be quickly heated up to 150 degrees Celsius in 10 seconds, and can complete the cutting process quickly and smoothly, leaving clean edge sealing without no debris.
  • 6 Styles to Choose: the foam board cutters come in 6 different styles, including 1 bow blade and 5 wand style blades with the lengths of approx. 5 cm/ 1.97 inches, 10 cm/ ....
Check Stock

KT99 Temperature Controller 120V 10A Digital Thermostat Regulator Switch Dual 1.5m Waterproof Probe for Heater Cooler Fahrenheit Display Aquarium

  • 【Two direct output】KT99 digital thermostat support two independent direct output, with 2pcs 1.5m NTC waterproof sensor can work with two independent equipment, with °F display..
  • 【Easy operation】KT99 Temperature controller control the load by setting the start and stop temperature. -58~248°F wide control range is good for both heater cooler..
  • 【Compressor delay time, alarm setting】 KT99 thermostat regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature alarm value to keep the home appliance, incubator, seeding pads, refrigerator ,reptiles, Aquarium, and other appliances safe..
  • 【Data storage and reset function.】 All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement..
  • 【Temperature calibration】±1°F Control Accuracy with (-30~30°F) Temperature Calibration, can make the all process more accurate, keep the temperature in desired range..
Check Stock

WILLHI WH-1803C PID High Accuracy Temperature Controller Heating 110V 5A Accuracy 0.1 ℃ or 0.1 °F Digital Outlet Thermostat Waterproof Probe for Incubator Wine Brewing Fermentation Temp Control

  • 【High Accuracy】- WH-1803C digital temperature controller specialized for constantly controlling a high accuracy temperature, High frequency PID algorithm with 0.1℉/℃ precision controlling. such as incubator, wine brewing industry, fermentation industry which need a high accuracy temperature point..
  • 【UL Certification power cable】–WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can max load 5A currents..
  • 【Heating only】- High accuracy digital temperature controller only work with resistance-type heater for heating, it can’t work with compressor for cooling and motors..
  • 【High and low temperature alarm】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error..
  • 【Delay Feature】- Our temperature controller built in time delay feature to protect out device from excessive ON/OFF toggling..
Check Stock

Beautyrest Heated Plush Elect Electric Blanket with 20 Heat Level Setting Controllers Equip with Secure Comfort Technology and 10 Hours Auto Shut Off, Full: 80x84, Aqua,BR54-0904

  • Evenly spaced heating elements deliver even heat distribution throughout. 100% UL certified and engineered to emit VIRTUALLY NO EMF radiation. Your safety is of utmost importance to us..
  • Luxuriously soft and cozy plush fabric offers extra warmth for the cold winter.
  • delivers heat ranging from 85 - 105℉ (temperature range will vary based on current ambient room temperature)..
  • Features 20 Heat settings and compatible with smart home outlets and automatic timers. A PRE-HEAT feature can jump start the warming process and the auto shut off can be set from 1-10 hours..
  • 1 Heated Blanket: Full (84 inx80 in) Twin & Full Size comes with one controller, while larger sizes come with 2 controllers..
  • Conveniently machine washable, simply unplug it and toss it into the wash. Confidently backed by 5 year warranty. DO NOT LEAVE CONTROLLER COVERED WHEN IN USED TO AVOID OVERHEATING..
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock

WEST TUNE Electric Heating Thermostatic Lab Water Bath with 2 Openings,6L Stainless Steel Tank Heating Water Bath 110V/600W

  • Accurate temperature control: Temperature controlling range - room temperature to 100℃.
  • the PID controller with 0.1℃ accuracy will ensure water temperature controlled as set.
  • Dual digital display: The water bath panel can display both PV and SV temperature, and the large LED display makes readings clearer..
  • High quality material: The water bath adopts stainless steel heating tube and water tank liner, the liner adopts jointless or weldless design, the shell adopts high quality cold-rolled steel plate, treated by spraying process, bright and wear-resistant, not easy to rust and corrosion..
  • Flask compatibility: The water bath comes with removable PP covers, which is compatible with different size of flasks and beakers..
  • Wide applications:Electric heating thermostatic water bath is mainly used for distillation, drying, concentration and warming of chemicals or biological products..
Check Stock

Inkbird ITC-306A WiFi Temperature Controller, Wi-Fi Aquarium Thermostat Heater Controller 120V~1200W Temperature Control with Two Probes only for Heater Aquarium Breeding Reptiles Hatching.

  • [Dual Protection] The aquarium temperature controller is equipped with 2 relays to ensure that the power can be turned off under any circumstances, this will protect your fish from being hurt by overheated water. (US Socket Only).
  • [Two Probes] Your fish might be in danger as it is hard to know the probe is broken immediately if the temperature controller has only 1 probe. The dual probe aquarium temperature controller will alarm if the temperature difference between 2 probes is bigger than 3/5, and the INKBIRD app will push a notification at the same time..
  • [Continuous Heating Alarm] The heating time can be set according to your needs from 1 hour to 72 hours, the controller will alarm if water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0~35.0/68.0~95.0 and the detectable temperature range is -40~100/-40~212..
  • [Plug and Play] The 1100w high-power aquarium temperature controller is compatible with most kinds of heaters, you dont need to assemble the product yourself, just plug and play..
  • [APP Notification] Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the INKBIRD APP, the INKBIRD....
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Foxhymir Submersible Aquarium Heater 300W/500W Fish Tank Heater with Accurate Temperature External Digital Controller IPX8 2 Suction Cups Suitable for Saltwater and Freshwater (300W)

  • 【Automatic Constant Temperature Intelligent Heater】The heater is made of explosion-proof quartz glass material and a high-temperature resistant nickel-chromium heating wire with silicon carbide heat conduction, fast water heating, and long-lasting 2 hours heating. The protecting jacket is a high-temperature resistant PC material, which can protect the fish and plant from scalding effectively..
  • 【Visible Temperature Setting】The controller is not waterproof, please keep away from water，LED digital display screen shows the current water temperature and preset temperature. The number above the controller is the current water temperature, and the number below is the set temperature, Red light means heating, Blue lights indicate constant temperature, blue light flashing indicates the heater is not fully submersible..
  • 【Temperature Adjustment feature & Automatic Heating】Temperatures Ranges 59℉ to 93℉, The heating rod built-in thermometer, When the water temperature is lower than the set temperature, the heater will automatically heating up, and stop heating when the water temperature is consistent with the set temperature. Fahrenheit and Celsius can be converted to each other, Pressing and holding for 5 seconds change the temperature display f....
Check Stock