ATPEAM Hydraulic Pressure Test Kit Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit with 11 Couplings for Excavator Construction Machinery 25/40/60 Mpa
- Specification: Include 3 pressure gauge ranges: 0-25Mpa, 0-40Mpa, 0-60Mpa.
- 10 stainless steel test couplings: G 1/4, Z 1/4,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/16, 9/16..
- Precise: G1/8 quick connector compatible for Caterpillar machines.
- Feature: It can provide reliable pressure measuring results, very easy to connect and use. Stainless steel couplings, anti-rust, leakage-proof and better than those aluminum products on market..
- Complete Set: This is an accurate Excavator Hydraulic Pressure Test Kit. Set include: 3 x pressure gauge, 3 x test hoses, 10 x couplings and 1 x quick release coupling. Portable to carry with aluminum case..
- Wide Application: Test tube connects the gauge for direct reading.
- Wear-resistant tube, impact-resistant with good elasticity.
- Widely used at construction, machinery, shipping, mining, petroleum, chemical industry etc..
Check Stock
18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket
- ◇ Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner..
- ◇ Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life..
- ◇ Note ---If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
- ◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
- ◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel ....
Check Stock10/2 with Ground Flat Yellow Submersible Well Pump Cable 600V (125FT)
- Manual hydraulic water pressure test pipeline tester.Fine workmanship and good performance. Easy to use. Durable in use..
- Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure.
- for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries..
- Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. ..
- Long working life, It is smooth operation, high efficiency, good performance. Small volume, low noise..
- Our small pump is designed with a mini size and light weight, it is easy and convenient to use..
Check Stock
ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test
- Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
- Easy-to-use: Instruction manual included.
- Includes a variety of adapters ideal for most vehicles.
- 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
- Extra-long rubber hose and 14mm/18mm manifold adapter.
- Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
- Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
- Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
- Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
- Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock
JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle
- FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
- UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
- 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock
JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case
- BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
- FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
- HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock
Digital Manifold Gauge Set HVAC Dual-Channel Temp Sensor HVAC Tools for 89 Kind of Refrigerant Digital AC Gauges Vacuum Pressure&Temp Test Digital HVAC Gauges with Hoses Digital Refrigeration Gauge
- ... have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
- 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
- 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate the direct reading of operating process data. Also, it tests the percentage of vacuum me....
Check Stock
70M Digital Pressure Gauge Kit with 2 70MPA/10000PSI, Hydraulic Pressure Gauges for Excavator, 2 Test Hoses, 9 Couplings Hydraulic Gas Water Pressure Test Kit with Backlight, 1 Year Warranty
- 【Perfect Fit】 Suitable for excavator brand includes: Caterpillar, CAT, Case, komutsu, Komatsu, Daewoo, Hyundai, Kato, Hitachi, Kawasaki, Komastu, Kobelco, John Deere, Sumitomo, Bobcat, Sany, Sumitomol. Quick release connector fits for both USA and Japanese brand excavator. Precisely measures the pressure of hydraulic system in the excavator construction machines etc..
- 【What You Get】 70M Digital Hydraulic Pressure Test Coupling Kit Comes with ① Qty-2 10000PSI Digital Pressure Gauges (with protective cover).
- ② Qty-2 63in (1.6m) Test Hoses with M16*2 end and BSP 1/4" female end respectively.
- ⑤ Qty-1 Waterproof Aluminum Storage Case..
- 【Measurement】 Digital Gauge Max Work Pressure: 0 - 10000PSI / 700BAR / 70MPa - Ø80mm. 9 Type Test Couplings: G1/4, G1/8, G3/8, M10*1, M10*1.25, M14*1.5, UNF7/16-20, UNF9/16-18 and NTP1/4..
- 【Better Accuracy】 Hydraulic Pressure Gauge consists of premium grade pressure sensor and electronic components. High precision and stability. Precisely measures gas, liquid, oil and non-corrosive mediums of stainless st....
Check StockOIMERRY 28PCS Coolant System Pressure Tester Kit for Vehicles, Universal Automotive Radiator Cooling Pressure Tester with Coolant Refill Tool Kit
- Let you feel easy to test leaks in radiator, change coolant, refill the vehicle cooling system and remove air pockets when using this 28pcs universal radiator pressure tester and vacuum type cooling system kit..
- The multi-colors (17 pcs) coded radiator test caps will let you easy to choose the suitable test cap during testing..
- This Radiator Pressure Test Kit's working pressure is from 0 to 35 psi, and suitable for most domestic and import vehicles..
- 28 pcs conponents (include durable exact size of nylon testing caps, rust-proof copper connectors, clear gauge reading, high-quality rubber and metal adapters) all included in one red suitcase, easy to organize, use and carry..
- OIMERRY OFFICIAL offers 1year 100% satisfying after-sales services..
Check Stock 
