Reviews Pressure Part

kipa Pressure Washer Manifold Kit for Briggs Stratton 020228 Pressure Washer EXWGV1721, Replace Part 16031 190627GS 190574GS Injector Inlet Valve Mounting Bolt

New Pressure Washer Manifold Kit For Briggs Stratton 020228 Pressure washer EXWGV1721, Replace part 16031 190627GS 190574GS injector inlet valve Mounting Bolt.
Top Quality CNC-Machined KIPA Pressure Washer Manifold Kit, easy to install. Directly Fit.
Fits for Briggs model number 020228. Please do match the part Number and the structure before purchasing, Thanks.
Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like. You can remove the short one and install the longer one that is on the OEM manifold.
Please note: Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold.

Package: two chemical injector sets include two brass barbs with 1/8 inch-27 male BSP thread, two check valve balls, two springs and four o-rings..
Compatible: Pressure washer soap injector kit is compatible with Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please check the part number of your pressure washer pump and make sure the soap injector matches your pump..
Function: If the part on your pressure washer pump is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
Attention: When you insert injector into receptacle of pump and tighten injector with 13mm wrench, don’t overtighten, you’ll break the o ring or crack white metal on pump..
If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

Twin Pack: 2 GJS Gourmet Replacement Float Valve Silicone Rings Compatible with 6.5 and 8.0 quart Ninja Instant Cooker and NINJA FOODI TENDERCRISP Pressure Cooker and AirFryer.
Float valve is part of the lid of a pressure cooker, and is essential for the pressure cooker to work.
Under normal situation, float valve inserts into the lid from outside to inside. Sealing Ring locks the float valve from inside, keeping the float valve in place.
Sealing Ring is often washed off, leaving the float valve loose and the pressure cooker unusable because the steam leak.
This spare part can make your disabled cooker work like new..

Fits all WMF perfect plus pressure cookers.
The safety valve is one of the important safety mechanism designs on perfect plus pressure cookers.
Add to your existing pressure cooker accessory collection.
Replacement part for all WMF pressure cookers.

The pressure canner sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure canner during canning and cooking..
ANTOBLE silicone gasket ring replacement fits presto pressure canner models 0174510, 0175107, 0175510, 0178107..
Replaces presto pressure cooker ring part # 09985..
It is simple to install and features an automatic air vent and includes overpressure plug..
NOTE: ONLY fit Presto pressure cooker models..

The pressure canner sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure canner during canning and cooking..
ANTOBLE silicone gasket ring replacement fits presto pressure canner 0128206, 0126306, 0128202, 0128203, 0128204, 0128303, and all models that begin with: 01263..
Replaces presto pressure cooker ring part # 09924..
It is simple to install and features an automatic air vent and includes overpressure plug..
NOTE: ONLY fit Presto pressure cooker models and NOT fit cooker # ( 01370 )..

【Features】Pressure Cooker Pressure Regulator 3 Piece. Adjustable to make 5-10-15lb weight.
【Easy to use】Plce the 3-pice pressure regulator on the vent pipe after the 10-minute venting perod is complete. Proessing time begins once the....
【Replaces part numbers】50332 Canner Pressure Regulator Fits Presto Pressure Canner models: 01/C22, 01/C17, 01/C13, 171003, 174001, 171001, 171002,....
【Instructions For Use】For low-acid canning (vegetables, meat, poultry, seafood), use 10 pounds of pressure for altitudes up to 1,000 feet. For....

2. Floater and sealer are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work ! Sealing Ring Replace every 18-24 months or when deformation is present in your old sealing ring . Made from 100% Safe Food-Grade durable Silicone ,Odor Resistant..
5. Package Content: (1x Floater and 1x Sealer + 1x Sealing Ring Silicone 100%Safe Food-Grade).
1. The sealer is often washed off, leaving the floater loose and the pressure cooker unusable, Floater and sealer are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work..
4. Silicone Sealing Ring Inside diameter 8.7″, outside diameter 9.5″. Fits models 6qt PPCXL,Smart-60 (Smart), IP-CSG60 (CSG60) and IP-CSG50 (CSG50)，PPC770, PPC770-1, PCXL-PRO6, and PC-TRI6. Not recommended for other brands of pressure cookers – Made exclusively for use in the IP..
3. floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (6 & 8 quarts), YBD60-100, PPC770.

“GJS Gourmet Floating Valve (or Float Valve) and Seal Ring Compatible With Fagor LUX Multi-Cooker Electric Pressure Cooker – 670041880”. This valve is not created or sold by Fagor..
Float Valve is part of the lid of a pressure cooker, and is essential for the pressure cooker to work.
Under normal situation, Float Valve inserts into the lid from outside to inside. Sealing Ring locks the Float Valve from inside, keeping the Float Valve in place.
Sealing Ring is often washed off, leaving the Float Valve loose and the pressure cooker unusable because the steam leaks.
This spare part can make your disabled cooker work like new.