Reviews Precision Gap Bed Lathe

Mini-Lathe Tools and Projects for Home Machinists (Fox Chapel Publishing) Simple, Practical Designs & Modifications to Extend & Improve the Versatility of Your Small Metal Lathe; Over 200 Photos

  • ...0-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
  • Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Learn to Turn, 3rd Edition Revised & Expanded: A Beginner's Guide to Woodturning Techniques and 12 Projects (Fox Chapel Publishing) Step-by-Step Instructions, Troubleshooting, Tips, & Expert Advice

  • ...0-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
  • Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Basic Lathework for Home Machinists (Fox Chapel Publishing) Essential Handbook to the Lathe with Hundreds of Photos & Diagrams and Expert Tips & Advice; Learn to Use Your Lathe to Its Full Potential

  • ...0-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
  • Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Mophorn Metal Lathe 7 x 12 Inch, Precision Mini Metal Lathe 2250 RPM 400W Variable Speed, Mini Lathe Precision Bench Top Metal Working Lathe for Various Types of Metal Turning

  • ...lly or with the adjustable auto feed rate. The hardness and accuracy of the slideways are obtained by raw material, heat hardening and grinding. The emergency stop button included..
  • Accurate 3-jaw Chuck: 3-jaw self-centering chuck for setting materials steadily. Backsplash guard included. The spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional slide is designed with abrasive resistance, moving blades freely with a feed rod..
  • Wide Application: Home workshop-friendly size. Driven by the quality motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works..
Check Stock

CO-Z 8"x14" Mini Lathe Machine with 600W Brushed Motor | 50-2250 rpm Wood Metal Turning Cutting Drilling Benchtop Metal Lathe with Accessories for Home and Shop DIY Woodworking and Milling

  • MINI YET MIGHTY: Only 30x12 inches, this CO-Z mini metal lathe still cranks out 600W (0.8 hp) and is great for handling small to medium projects.
  • it provides an 8.3 inch (21 cm) swing over bed and 13.8 inch (35 cm) distance between its centers with a 0.8 inch (21 mm) spindle bore.
  • PRECISE ENGINEERING: Ideal for professionals, this mini metal lathe's high-precision 4-inch 3-jaw chuck handles both square and round objects with equal aplomb.
  • its granular precision is especially useful for jobs requiring high accuracy such as threading.
  • COMPLETE CONTROL: The lathe's rotational speed can be set from 50 to 2250 rpm and monitored through the digital display.
  • the well-crafted head and tailstocks, large through-hole, and 4-way tool post also contribute to providing greater control of your work.
  • ULTRA-STURDY & SAFE: The all metal construction assures you of a long service life.
  • the transparent chuck guard protects you from swarf or broken tools while also permitting visibility into the point of operation.
  • WIDE APPLICATION: This mini woodworking lathe from CO-Z comes suitable for many processing tasks needing extreme precision, including turning, drilling, threading, and cutting.
Check Stock

INTBUYING WM180V Metal Lathe Machine Benchtop Lathe Machine 7''x12'' Mini Precision Lathe Brushless Motor 600W 2500RPM Variable Speed Mini Metal Lathe MT3 Spindle Taper Inch Thread Precision 110V

  • ... Performance】WM180V Mini Lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies by Brushless Power 600W/110V,The length of center is 11.8"(300mm),Swing Over Bed is 7"(180mm),Rotary diameter of tool rest is 5.51"(140mm),Diameter of chuck is 3.94"(100mm),Spindle taper is MT3,Precision of the spindle is 0.01mm.❥Our metal lathe include 7 gears(30/48/50/52/60/66/70)..
  • 【High Precision Operation】❥High Precision Reverse three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly.❥Precise dials are provided on the saddle handle, the tail stock handle and the movable center, allowing for more accurate and professional work.❥With the MT2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation..
  • 【Easy to operate】❥The rotation speed can be displayed on the digital screen,which is more convenient for accurate adjustment and operation.❥The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools.❥Forward and reverse switch and with emergency stop switch In case of emergency can stop immediately..
  • 【Adjustable Rotation Speed】The spindle rotation speed is divided into two adjustable gears....
Check Stock

SENDUO Upgrated Mini Lathe 7\X14\

  • The mini metal lathe features a 550w brushed motor, 110V 60hz. High grade iron construction with robbert feet to be solid and stable turning, drilling, threading and cutting performance. Two rails offer smooth and durable moving..
  • MT4 Spindle speed range 0-2250±10%RPM,have a digital display,which is convenient for customers to operate,the speed levels can be adjusted for different metal workings. The mini lathe machine with a soft start button ,features forward and reverse design..
  • Power metal lathes are with Large Center Distance 13.78"/350mm and Swing Over Bed: 7.09"/180mm. K11-100 3-jaw self-centering chuck with 3 internal jaws and 3 pcs external jaws.Cover and long splashguard offers a clean working and safer condition .the cover have an automatic power-off protection function ..
  • Benchtop Lathe with 4-way tool rest, can help changing and adjusting cutting tools at different directions easily. Loose the fix handle, then you can move the tailstock forth and back.
  • Widely Used-Ideal for sample processing, mini precision parts processing, and modeling works.equiped with Metal gears,Aluminum handwheel,and extra set of the metal gears ,an extra lamp and free 7PCS lathe carbide tool.
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...is 31.50"(800mm),Swing Over Bed is 8.27"(210mm),Rotary diameter of tool rest is 5.51"(140mm),Spindle bore is 1.50"(38mm),Diameter of chuck is 4.92"(125mm),Width of lathe bed is 3.94"(100mm),Thread standard:Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR"....
Check Stock

LETRA Mini Benchtop Metal Lathe with Metal Gears | 8\x16\ Wood & Metal Working Tool | 1100W

  • PRECISE ENGINEERING: Ideal for professionals, this mini metal lathe's high-precision 4.9-inch 3-jaw chuck handles both square and round objects with equal aplomb.
  • its granular precision is especially useful for jobs requiring high accuracy such as threading.
  • A MINI YET MIGHTY LATHE: Only 32x13 inches, this mini metal lathe still cranks out 1100W and is great for handling small to medium projects.
  • COMPLETE CONTROL: The lathe's rotational speed can be set from 0 to 2250 rpm and is monitored through a digital display.
  • the well-crafted head and tailstocks, large through-hole, and 4-way tool post also contribute to providing greater control of your work.
  • STURDY CONSTRUCTION: This mini woodworking lathe is made of premium cast iron and all its wear-resistant metal gears provide efficient power transmission, assuring you of a long service life.
  • WIDE APPLICATION: This mini metal lathe comes suitable for many processing tasks needing extreme precision including turning, drilling, threading, and cutting.
Check Stock