Reviews Ppr Water Pipe Line

DURATECH Ratchet PVC Pipe Cutter, Cuts up to 2-1/2\ PEX, PPR, PE and Plastic Hoses, with PTFE-Coated Sharp Blade, Suitable for Home Repairs and Plumbers

  • Features ratchet gear design, this pipe cutter provide energy-efficient cutting, which can successfully complete the cutting operation with one hand. And with ratchet gear, it can gradually and effectively cut into pipes, prevent the pipe from deforming and crushing..
  • Heat-treated blade, sharp edge for burr-free cutting. Coated with Teflon(PTFE) not only has reliable strength but also has waterproof surface for anti-rust.To save space and prevent accidental injury, you can shrink the handles on both sides and lock the safety lock when you not to use it..
  • With 2-1/2in(63mm) maximum opening, this cutter is able to cut plastic hose under 2-1/2 inch diameter. Notice: to ensure product durability, do not cut in metal pipes, when using the other hand to hold to ensure that the cutting surface is vertical..
  • Heavy duty aluminum handle with spray coated surface can effectively resist corrosion, and prolong product service life..
  • Could be a great helper in pipe repair jobs. Especially when you need to cut pipes into the required length, remove damaged sections of pipework before replacement. Fits for PVC, PPR, PE and other plastic hoses cutting..
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • ...the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water,....
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • ...the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water,....
Check Stock

Home Intuition Foiled Back Ceramic Fiber Pipe Wrap Insulation Tape Roll for Indoor Outdoor Water Pipes Fire Rated 2300F 3”x25’

  • The First of Its Kind – An industry-first solution for high temperature pipe insulation, this roll combines the best qualities of ceramic insulation, pipe wrap, and heat tape for water pipes into one extremely effective tool..
  • Easy to Install 25′ Roll – The first and only ceramic insulation to come in a convenient roll for easy pipe wrapping. Save time and cut costs on installations. Simply wrap the pipe, and secure. Dimensions: 3 inches wide x 0.25 inches thick x 25 feet long. Non-adhesive..
  • Energy Saving Insulation – Foil backed insulation locks in heat and reduces wasteful heat radiation loss on hot water pipes. Material is energy saving with low thermal conductivity, to increase efficiency and lower heating costs..
  • High Stability and Strength – High temperature pipe insulation that is fireproof up to 2300 degrees F. Safe fire rated pipe insulation with excellent chemical stability and industrial grade durability for long service life..
  • For Hot and Cold Pipes – Perfect for boiler and heater pipe insulation, pool pipe insulation, AC line insulation, AC pipe insulation, exterior pipe insulation, and insulation for pipes outside and in. Helps prevent moisture and condensation buildup on cold water pipes..
Check Stock

iCrimp PEX Pipe Cutters for Cutting 1/8 -1 PEX Tubings NOT for PVC Pipes

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock

Fuel Line Plier Petrol Clip Pipe Plier Hose Pipe Disconnect Release Removal Pliers Clamps Tool

  • 【Size】：The total length approx:9”/220mm, handle length approx:4”/100mm, Maximum opening approx:2.4”/60mm. Heavy duty design, 8mm....
  • 【High quality material】：This fuel pipe plier is made of high-quality steel material, which is durable and sturdy. It is not easily damaged, has....
  • 【Useing】：Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • 【Scope of application】：The fuel hose plier has high practicality, which is a practical tool for disassembling and replacing the connections on....
  • 【Design features】：The fuel line clip release plier designed according to ergonomics principle, which is labor saving and comfortable to use.Use....
Check Stock

Manual Pulse Encoder, Portable High Efficiency CNC Pulse Generator for Numerical Control System

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

Manual Pulse Encoder, Portable Smoothly Operation CNC Pulse Generator 4 Terminal for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

CNC Pulse Generator, Manual Pulse Encoder 100PPR 4 Terminal Smoothly Operation for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock