Reviews Ppr Stop Valve

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Beech Lane Upgraded Water Valve Kit 385311641 for Dometic Toilets 300, 310, and 320, Freeze Resistant, Increased Valve Lifespan, Ultrasonic Sealing Safeguards Against Leaks (Off-White)

  • Re-engineered Replacement Valve For Dometic 300 Series Toilets | Lifetime Manufacturer Warranty | Stop breaking your back every year replacing your leaking toilet valve with another poorly designed valve. Beech Lane has developed a Patent Pending valve that fixes the core issues which cause valve failure. Fits Dometic 300, 310, and 320 Series RV Toilets. Compare to Dometic Sanitation 385311641 Water Valve Kit F300/F310..
  • Freeze Resistant Technology Prevents Cracks | Features glass fiber reinforced polymer construction that is tested down to -22 Degrees F for crack resistance during freezing temperatures..
  • Lifetime Manufacturer Warranty | Beech Lane Lifetime Manufacturer Warranty covers valve replacement in event of failure..
  • Rotary Seam Melting Completely Seals Valve Seams | Engineered with a hexagonal inner structure to the cap to allow for complete seam sealing during production between cap and valve body with rotary melting..
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

New FloodStop for Dishwasher/Toilet/Water Filter FS 3/8-C v4

  • AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source, not included).
  • The FloodStop valve is connected to the angle stop and supply line.
  • Water/leak sensor is placed at the base of the appliance or fixture (Dishwasher - Toilet - 3/8" Icemaker - etc.).
  • Water on sensor closes FloodStop valve and sounds alarm.
  • Valve stays closed until problem is attended to and system is reset.
Check Stock

Eastman 04353LF Multi-Turn Dual-Outlet Compression Inlet 3-Way Stop Valve with Removable Metal Handle, 5/8-Inch OD Compression Inlet (1/2-Inch Nom.) x 3/8-OD Compression Outlet x 3/8-Inch OD Compression Outlet, Chrome Plated

  • ✅QUALITY- Made of a brass body, plastic stem, brass nuts, and a chrome-plated finish. The Eastman Speed-flex 3-way shut-off valve is a multi-turn valve that resists corrosion and provides a water-tight seal. The working temperature is 40° F to 140° F and the working pressure is 125 PSI..
  • ✅EASY TO USE- Removable handle with an oval design for easy grip..
  • ✅FUNCTIONALITY- This multi-turn stop valve controls water flow at the plumbing fixture, eliminating the need to turn off the water supply to the entire home for maintenance..
  • ✅MEASUREMENT- This stop valve has a 5/8-inch outer diameter compression inlet x dual-outlet connection: 3/8-inch outer diameter compression outlet x 3/8 outer diameter compression outlet..
  • ✅SAFETY- UPC and NSF approved, complies with Lead Free law..
Check Stock

2wayz Garden Hose Shut Off Valve. Stop Running Around Your Lawn! No Leak Experience - Tight Seal Ball Valve Hose Fitting. Quick Connect Shutoff Coupling With Smooth Long Knobs (4cm!).

  • STOP GETTING SOAKED, STAY DRY AS A BONE! If you find yourself constantly dropping the hose on the ground and having the water spray in your face, our shut off valve is the perfect item for you! When you are finished with the nozzle, flip the knob, and DROP THE HOSE ALL YOU WANT! You can also use this in conjunction with a hose nozzle, since you can keep the switch off, and easily change or unscrew the nozzle without the water spraying all over you..
  • 1-2-3 INSTALL, OPTIMIZED FOR CONVENIENCE & USABILITY. Easily install the shut off valve by screwing it onto your water hose or spigot with ease! With the TPR rubber coated body, the straight valve is anti-slip, which means you can grip it even with wet hands! Easily turn the LONG 4CM KNOBS (ideal for people with arthritic hands) to turn the water on and off. Unlike other shut off nozzles, ours will never stiffen with age. Smoothest knob turns, or you can ACTIVATE YOUR FULL MONEY BACK GUARANTEE!.
  • RUSTPROOF, NO LEAKS. The 2wayz straight shutoff valve was designed with the highest quality in mind. With a solid and tight valve, it is designed to never leak or drip. NO RUSTING! Unlike some other models which will rust in a few months, our valve is made out of a combination of strategically place....
Check Stock

Symmons S-3500-CYL-B-TRM Dia Shower Valve Trim in Polished Chrome (Valve Not Included)

  • For use with pressure-balancing valve model S261XBODY, or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY (valve not included).
  • Adjustable stop screw to limit handle turn.
Check Stock

gohantee R410A Valve Core Remover Installer with Dual Size SAE 1/4 & 5/16 Port AC Valve Core R22 HVAC Valve Core Removal Installer Tool Air Conditioning Line Repair Tools

  • [FITMENT] The valve core grabber tool can adapt to R22 R134 R410 R32R air-condition, external bypass port design can remover valve cores..
  • [FUNCTION] The Schrader's core grabber with disconnect valve remove and install valve cores without the loss of refrigerant. No need to stop the machine or release the refrigerant..
  • [DESIGN] Convenient and light, spring design, make it work more effort. There is a ball valve that can be opened and closed in just a quarter-turn rather than a stem-type valve. Replace damaged leaking valve core without loosing the charge in air condition systems..
  • [PREMIUM QUALITY] This valve core remover installer tool is made of is made of heavy duty stainless steel and copper materials, solid and sturdy, durable and long life to use..
  • [SERVICE GURANTEE] Package include: 1Pc 1/4" & 5/16" SAE Valve Core remover and install tool. This valve core remover comes complete with 1-Year warranty. If you have any problem, feel free to contact us..
Check Stock