Reviews Ppr Composite Pipe

Poulan 580940901 Chainsaw Gas Cap

  • Replaces old part numbers 577858501, 530047192 and 530047164.
  • Fits PP3816A, PP4218A, PPR4218A, PP3816A, PP4218A and PPR4218A.
Check Stock

Sydien 20Pcs White 25mm/1" ID White PVC Water Pipe Clamps U-Shaped Buckles For Water Pipes & Tubing Hoses Support With Screws

  • ⭐Package Content: 20Pcs PVC Water Pipe Clamp & 20Pcs Wall Anchor & 20 Pcs x Screws.
  • Overall Size: 32mm*15mm*38mm/ 1.26" * 0.59" * 1.50"(L*W*H).Fits for tubes with 25mm/ 1" OD..
  • ⭐High Quality: Made of PPR plastic material ensuring abrasion-resistance and rust-resistance..
  • ⭐Space Saving: Water pipes or hoses can be firmly fixed on the ground or wall under the lock of the clip, which can make the pipeline more tidy and effectively save space..
  • ⭐Application: Suitable for water supply pipeline system and cable wiring pipeline system. Also used for laying and installation of water pipes, oil pipes, PEX pipes, etc..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

LiGuVCY Universal Hydraulic Pipe Expander Tool for Aluminum Copper HVAC Pipe with Pipe Expander and 7 Pcs Pipe Expander Heads 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 Inch

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock

Height Adjustable Portable Salon Deep Shampoo Basin Sink Hair Treatment Bowl with Drain Hose- Black

  • This extra-large capacity bowl is lightweight and economical,also very stylish, yet loaded with professional features, easy to clean and low maintenance. Comes with all accessories and fixtures..
  • Its stain-resistant bowl is constructed from durable ABS composite & Stainless Steel Support Pipe, and the edge is rolled for strength and client comfort, strong pedestal base with chrome-metal riser, composite feet/bumpers on the bottom of the stand protect your floors from marks..
  • The height is adjustable from 37" to 54" to meet needs of different customers.
  • this sink can accommodate reclining or standard chairs and can also tilt completely forward/parallel to its riser for easy storage and transportation..
  • It includes a rubber plug stopper fitting the drain opening at the bottom of the basin and a ribbed to prevent the water out, flexible drain hose(2.9Ft-4.9Ft) that connects to the underside of the drain. Bowl dimensions: 19"L × 15"-20"W × 10"H PP bowl & Stainless Steel Support Pipe,Portable hair sink made of durable ABS composite.
  • The sink can be permanently installed and used in your salon, and is also portable and can be brought directly to a client’s home. For travel use, simply supply a water source such as a water pitcher or hose, and you can drain ....
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Manual Pipe Welder HDPE Butt Fusion Welding Machine Electric Tube Butt Fusion Equipment Hot Melt Solder Welder for 2.48"-7.87" PE PP PB PVDF HDPE PVC Pipes and Fittings

  • 【Application】The welder is suitable for PE PP PB PVDF PPR plastic pipe hot-melt butt welding. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory..
  • 【Welding Size】Welding level (outer dia) is 63mm(2.48”)、75mm(2.95")、90 mm (3.54”)、110 mm (4.33”)、125 mm (4.92”)、140 mm (5.51”)、160 mm (6.30”)、180 mm (7.09”)、200mm(7.87”)..
  • 【Fast Heating Speed】Thick high-quality layer paint, uniform heat conduction, rapid heating of the tube, high work efficiency..
  • 【Stable Performance】The heating plate adopts independent temperature control system and imports large gold paint surface coating, which has good invisibility and stability..
  • 【Adjustable Temperature】Accurate scale temperature adjustment 0-280℃ Manual adjustment and lasting constant temperature..
Check Stock

Arm Exerciser, Arm Muscle Training Machine, Adjustable Hydraulic Pressure 22-440lbs, Power Twister Bar Adjustable Fitness Equipment for Men and Women-Exercise Biceps, Pectoral Muscles,Red

  • The handle of the arm strength device is made of PPR imported material, absorbing sweat comfortable and non-slip. The handle is covered with a plastic ring protector for more security.
  • The Power Twister surface is made of double-plated spring steel, which is not easy to fall off paint for a long time. Thickened steel pipe wall, not easy to deform and bend, not broken and damaged, strong fatigue resistance.
  • Power Twister is used to exercise the arm muscles. Its main exercise muscles and chest auxiliary exercise wrist.Increase the muscle strength of upper limbs, including the pectoralis major shoulder elbow and wrist joints and other parts of the power.
  • The Power Twister Bar is a portable exercise device that is great for home, office ,gym or travel etc. Use.
  • If you find any problems or dissatisfaction after receiving the product. Please contact our store by order in time. We will solve the problem for you as soon as possible!.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock