Reviews Powerful Scopes

Aim Assist High Offsett Bubble Level for 30mm Riflescope Anti-Cant

High offsett allows the bubble level to be easily read while looking through scope.
Slim design allows the level to be easily installed on most scopes.
Comes with all installation tools and hardware.

WHAT'S IN THE BOX - Rubber Lens Covers, Cleaning Fob/ Cleaning Cloth, Multi-Tool, Power Throw, Lever or Similar, Stickers, Owners Manual.
NX8 F2 SCOPES - Despite the compact size, the NX8 F2 scopes feature Nightforce's ZeroStop turret, Digillum reticle illumination, power throw lever, and several new purpose-built F2 reticles.
GREAT OPTICAL QUALITY - The optical system uses ED lenses to allow for great optical quality in a system with an 8x zoom ratio and short overall length.
RETICLE - The new MOAR-CF2D reticle features a dual scale calibration and provides users with an open center with dot and intuitive numbering of subtensions for a clear view of the target and fast holds anywhere in the reticle.
HIGH PERFORMANCE SCOPE - For hunters or shooters who prefer a reticle in the second focal plane that stays consistent in size throughout the magnification range, the Nightforce NX8 F2 scopes will take your capabilities to a whole new level.

SAVE AMMO: Reduce wasted ammo, the fastest gun zeroing and sighting way to boresight your scopes & sights without firing any ammo..
High Visibility Laser: Powerful class IIIA.
Accurate: Precision machined lightweight aluminum casing for optimum accuracy, finished in ‎gunmetal grey..
Long Life Time: Two extra set of batteries included,comes with 3 sets of batteries (9 batteries) provides long lasting battery life. NOTICE: Unwrap the batteries first and use only 3 batteries at a time..
COMPATIBILITY: Designed to make it quick and easy to bore sight your rifle chambered in .223/5.56..

【Compatible】Figure 8 open-ended light holder with upper and lower clamps, will allow flashlight to be attached to barrels or scopes. With rail on the bottom. Will fit Remington 870.
【With Protective rubber inserts】Incorporated into the holder, reducing friction and shock damage to the surface of the flashlights and other components held in the clamp..
【Quick-Detach (QD) toggle, No tools needed】can quickly install and remove the Light Holder from the barrels or scopes. The QD toggle can also loosen and tighten the clamps by rotating the toggle on its axis..
【Clamps Size】When the adjusting screws are fully tightened, the clamps may hold up to 18 mm, fully opened, the clamps may hold up to 30 mm. QM8 allows for different diameters between the upper and lower clamps (i.e. upper clamp holds 25 mm, lower clamp holds 32.5 mm) The diameter of barrels or scopes held can vary from 18 mm – 30 mm (the flashlight exposed tube body should be at least 25mm.).
【Material】6061 Aerospace Aluminum alloy with anodization, Durable and Light-weight..

All spotting scopes, binoculars, night vision devices and video cameras with a 6.35mm (1/4) tripod thread can be used with.
Attaches to top edge of car window's glass.
All-metal body is tough and long lasting.
For use with all spotting scopes, cameras, and other tripod adaptable accessories.

The Nightfox XB5: a powerful 5W handheld flashlight used to massively boost the range of your night vision device..
The XB5 emits 850nm infrared light which cannot be seen by the human eye, so must always be used with a night vision device. 1x 18650 battery required (not included)..
Features Nightfox’s Rapid Focus and Dimmer Switch features to fine-tune the beam..
Durable and long-lasting despite weighing just 6.9oz. O-ring sealed to be splashproof..
Use with any night vision scopes and binoculars, but for the ultimate night vision experience we recommend the Nightfox 100V, 110R, or 120R. Attach it to these devices using the Nightfox Accessory Mount..

Low profile 0.5 inch high riser mount for scopes and optics, allows for sight clearance over front sights.
5.7 inches in length with 14 Picatinny rail slots, Picatinny rail mount will accommodate all Picatinny or Weaver standard scopes, red dots, and optics.
Sturdy and lightweight, 5 ounces in weight, crafted from aircraft grade aluminum.

Picatinny rail mount for Ruger 10/22 model rifles,Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics,Fits All Ruger 10/22 Models:Takedown, Carbine, Target, Compact, Sporter, Collector's, Tactical, and 50th Anniversary..
Installs via included set screws into the Ruger 10/22 factory mounting holes,easily without any modifications required..
Light in Weight, Yet Strong and Durable：Crafted from lightweight 6061T6 Aircraft Grade Aluminum, 4.6 inches in length and 1.2 ounces in weight,anodized on the surface, matt black..
Comfortably fit your red dots, compact scopes, and even short-mid range rifle scopes on to your Ruger 10/22.The rail sections are compatible with all Picatinny or Weaver based optics..
Our products provide lifetime warranty. Any dissatisfaction, please feel free to contact us at any time, our friendly customer service always stands behind our products and responds to all emails within 24 hours..

◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
Side mount for AK compatible scopes and optics.