Reviews Power Tool For Lug Nuts On Cars

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • Remove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady....
Check Stock

XtremepowerUS Torque Wrench Multiplier Lug Nut Labor Saving Wrench Remover Set (1/2" DR) w/Carrying Case

  • Professional Labor Saving Wrench is a newly designed for car wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque without impact or Compressor needed.
  • When your normal wrench is not able to do the job on some stuck lug nuts, you really need to ramp up your torque!.
  • The purpose here is to give extra leverage on tight bolts where a conventional tool is not going to give you the power you need to loosen them..
  • An important part of any professional tool kit, especially when working with trucks and construction.
  • Package Content: Wrench, Socket Set (17mm, 19mm & 21mm) and Storage Case.
Check Stock

Circuit Performance Spline Drive Tuner Acorn Lug Nuts Red 12x1.5 Forged Steel (24pc + Tool)

  • NOTE: THE AMAZON VEHICLE GUIDE DOES NOT WORK ON THIS LISTING.
  • NOTE: THESE LUG NUTS WILL ONLY WORK ON VEHICLES THAT REQUIRE A 12X1.5 THREAD PITCH AND ARE USING AFTERMARKET WHEELS THAT HAVE A TUNER STYLE 60 DEGREE CONICAL LUG SEATING. IF YOU ARE UNSURE FOR FITMENT PLEASE CONTACT BEFORE PURCHASING..
Check Stock

XtremepowerUS Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier w/ Cr-v Socket (Torque Wrench W/ 8pc Socket Set)

  • Remove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 4800 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) e....
Check Stock

TEKTON 1/2 Inch Drive Thin Wall Impact Flip Socket Set (6-Piece) | SIF92400

  • Includes 5-pc. 1/2 in. drive impact flip sockets: 17 x 19 mm, 21 x 22 mm, 3/4 in. x 13/16 in., 7/8 in. x 15/16 in., 1 x 1-1/16 in..
  • 1-pc. 1/2 in. drive impact extension bar: 3 in..
  • Fits most sizes and styles of lug nuts and bolts–ideal for servicing cars, trucks, utility trailers, and more.
  • Each socket well is extra deep to provide increased engagement with lug nuts and clearance for decorative caps.
  • The outer diameter of each socket is 1 to 2 mm smaller than other TEKTON impact sockets, allowing for better access in tight lug nut wells.
  • Steep, 60 degree chamfered openings make it easy for the flip sockets to slide over lug nuts.
  • Sizes are marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Each socket meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
  • High-density polyethylene case withstands common lubricants, fuels, and solvents.
Check Stock

EZISOE 6x5.5 Wheel Spacers 4Runner Tacoma 6Lug, 2 in 6x139.7mm Forged Wheel Spacers 108mm Hub Bore with 12x1.5 ET Lug Nuts

  • 6×5.5 Wheel Spacrs Spec: 4 PCS 2 inch Thickness per spacer, 6×5.5 Bolt Pattern, Hub Bore: 108 mm, 12×1.5 Extended(ET) Shank Lug nuts. Because of the problem of Amazon unpacking, if you only receive 2pcs, please contact us and we will reissue one set for you.
  • 6×5.5 Wheel Spacer Fitment: compatible with 1996-2022 4Runner, 2007-2020 FJ Cruiser, 2001-2007 Sequoia, 2001-2022 Tacoma(Only 6 Lug vehicle), 2000-2006 Tundra, 2004-2012 Colorado, 2004-2012 Canyon, 2008-2014 Censor, 1994-2003 Passport, 2006-2010 H3.
  • Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60° conical seat plus a small 0.300″ long shank that will fit into most Toyota wheels or Aftermarket. This equates to about 6 additional full turns of thread engagement, which will usually allow for safe installation of the wheels.
  • Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the Aggressive Outlook.
  • Warranty: We provide 1 year warranty. Easy Bolt-on Installation, No specical Tool Needed.
Check Stock

Wheel Accessories Parts Set of 24 Lug Nut Closed End Bulge Acorn Lug Nuts 1.38” Long - Cone Seat - 21mm (13/16”) Hex Wheel Lug Nut (Chrome) (M12x1.25 Thread)

  • For cars with wheel studs requiring a M12x1.25 thread and wheels that take a conical/ cone seat..
  • 1.38” Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • Kit includes 24 Chrome Lug Nuts M12x1.25 thread.
  • 2-piece design: lug nuts protect against false torque reading resulting from the wheel stud contacting the inside of the lug nut prior to seating with the wheel..
  • Full money back guarantee. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result..
Check Stock

Lisle 40100 Hub Remover, Black

  • Safely Removes Frozen Hub Assemblies. Patent Pending.
  • Fits on most 5, 6 and 8 lug hub assemblies found on cars and trucks..
  • Bolt the 1/2" thick driving plate to the hub using the hardened washers and existing lug nuts..
  • Insert the hardened threaded forcing screw to push against a solid surface to loosen the hub assembly..
  • To completely remove hub the forcing screw must push from a least two different solid points..
Check Stock

20 Pieces 14mm 1.50 14x1.50 Thread Bulge Acorn 1.38 Long Lug Nuts Chrome 13/16" Hex Fits 2015 + Mustang 2005 + Challenger Charger 300C 2011 + Camaro 2018+ Jeep Wrangler

  • ❌ These Lug nuts are designed for AFTERMARKET wheels only. This lug may be the correct thread for your vehicle in many cases the lug seat is not large enough to create enough clamping force to safely clamp the OE wheel to your vehicle..
  • 14mm 1.50 14x1.50 Thread | 1.38 Long | 13/16" Hex | 60 Degree Taper Conical Seat | Bulge Acorn | Chrome Finish | 2 Pc Construction | 20 Pieces.
  • Designed in the USA. Our 1.38" 13/16" Hex Lug Nuts are typically used on passenger cars, light SUV's and crossovers.
  • Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish.
  • Always use SHOP BY VEHICLE to validate product fitment to your vehicle..
Check Stock