Reviews Power Qaulity Meter

CrocSee AC 80-260V 100A CRS-022B LCD Display Digital Current Voltage Power Energy Frequency Power Factor Multimeter Ammeter Voltmeter with 100A Split Core Current Transformer

  • The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted..
  • The large-screen LCD can display voltage/ current/ active power/ cumulative energy/ frequency/ power factor at the same time..
  • Equipped with AC current transformer, donot need to buy it separately.
  • The CT(Inner diameter of the CT: 15mm/0.6”)can be either on Live Line or Neutral Line..
  • The bright blue backlight can be turned on/off manually. Store energy data when power off(can be reset).
Check Stock

HFBTE LCR Meter Inductance Resistance Capacitance Tester Digital Bridge Meter with Testing Frequency 100Hz 120Hz 1KHz 10KHz 40kHz 100KHz Basic Accuracy 0.3%

  • LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable..
  • LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power..
  • There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode..
  • Capacitance: 0.01pF-100mF. Inductance: 0.001uH-100H. Frequency: 500KHz/500Hz-50KHz. Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF, 1% of inductance range 1uH~1H, 5% of range 1H~100H..
  • Package include: 1 x handheld LC meter, 2 x banana plug to alligator clip test leads, 1 x LCR kelvin alligator clip test lead, 1 x USB cable, 1 x charging cable, 1 x manual..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Retro Dual Analog VU Meter RGB Sound Level Indicator DB Panel Display

  • This is not a speaker, not tubed power amplifiers, no Bluetooth, not rechargeable.
  • It is a voice-activated VU level meter that oscillates to ambient sounds and follows the beat when there is music. There is a row of RGB lights in the middle grille that can adjust the mode and colour themselves..
  • Newly designed VU level meter with gold plated circuit board and backlit VU meter head. The microphone uses the same silicon microphone used on mobile phones and is extremely sensitive..
  • The whole unit measures 160mm x 44mm x 54mm, the power connector is Type-C, the supply voltage is 5V and the connector is located on the back for easy cable routing..
  • Accessories include a 1m Type-C power cable and 5V power adapter. The product is handmade and has been assembled..
Check Stock

EKM Metering Electric kWh Meter and Indoor Enclosure Kit Bundle - 3-Wire, Single Phase, 120/240 Volt Pass-Through kWh Energy Meter with Professional, Custom-Designed Indoor Enclosure Cover Kit

  • KWH ELECTRIC METER – The 120/240 volt, three-wire, 100A, 60Hz kWh metering system is built to meter and monitor household, apartment, and solar power with its non-resettable LCD screen.
  • COMPACT, EASY-TO-INSTALL DESIGN – The kilowatt usage meter is designed for simple DIN-rail mounting, as wires pass through 3/8″ diameter tubes. Usage data is maintained through power outages..
  • METERING LEADER – EKM Metering is a trusted brand of submeters and omnimeters. The Electric kWh Meter features LCD readout in hundredths of a kWh (up to 99999.99 kWh) with 800 pulses per kWh..
  • INDOOR ENCLOSURE KIT INCLUDED – Also from EKM Metering Inc., the adjustable Indoor Enclosure Kit adds a professional look to the Electrical kWh Meter so that only the face of the meter is exposed..
  • BACKED BY THE AMAZON A TO Z GUARANTEE: Receive a full refund on this EKM Metering Bundle (includes one Electric kWh Meter and one Indoor Enclosure Kit) if you are unsatisfied for any reason..
Check Stock

Taidacent Ohm Meter Resistance Tester Ohmmeter Digital DC Resistance Measuring Instrument Fixture Resistance Measure Panel Meter (200K Ohm, DC5V with Cover)

  • Power supply: DC5V/DC12V optional (current consumption is less than 50mA).
  • This ohmmeter is a common ground instrument, non-isolated, it is recommended to use a separate power supply, that is, the power supply is not related to the signal.
  • The resistance meter cannot be measured with electricity, otherwise the meter will be burnt out.
  • Select a suitable range, if the range is selected too much, the small resistance cannot be recognized or the measurement is inaccurate.
  • The meter head is a common ground instrument (that is, the negative pole of the power supply and the negative pole of the signal are connected), it is recommended to use a separate, independent, and isolated power supply (that is, the power supply and the measurement terminal are not related).
Check Stock

PH Meter Smart Bluetooth,7-in-1 ORP Meter/S.G Meter/TDS Meter/Salinity Tester/PH Meter/EC Meter/Temp Water Meter, PH Meter for Water 0.01pH Resolution High Accuracy,ph Tester Digital with ATC.

  • 【Orp Meter】Pool chemical testing kit is a good helper for pool supplies.In addition to testing the ORP value in swimming pool water, pool water tester can also be used as a pool thermometer.The ORP value is a measure of the oxidative power or sterilization strength in water pool salt. The higher the ORP value in water, the stronger the oxidative power and sterilization ability..
  • 【Comprehensive Information Display】Simply immerse the tds meter electrode in the solution to be tested, readings are quickly displayed on a large LCD display. Water tester pen multi-parameter display at the same time, mobile phone APP control backlight display.Tds meter mini size,Lightweight and portable size allows you to take it around easily in your pocket and do your measuring anywhere..
  • 【Cloud-Based Data System】pH meter for water accurate real-time Bluetooth data transmission and clear measured values make it easy for you to save, manage and share water ph tester of test data without worrying about lab ph meters data loss.It can be used as a classic water tester even if ph tester is not conne....
Check Stock

200A High Precision Power Analyzer Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind Power

  • 【REAL-TIME READING】200A high precision power analyzer convenient to calculate the voltage, current, power, discharge amount and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Predict model airplane flight time,Choose the best propeller/most efficient motor..
  • 【HIGH PRECISION】Current: 0-200A, continuous current 50A, resolution 0.01A. Operates from 4.8-60V (When the test voltage is lower than 5v, a separate 12v power supply is required to power the power meter), resolution 0.01V. Measures 0-6554Wh, resolution 0.01Wh. The current can determine the battery capacity, the continuous current can determine the discharge time, and the maximum instantaneous current can determine the internal structure of the battery to protect circuit..
  • 【MULTI-FUNCTIONAL】Watt meter power analyzer can verify sufficient operating voltage under load and prevent peak currents damaging battery, motor control, motors, wiring and connectors.
  • Verify correct battery charger operation (connect your battery and charger).
  • Set the cut-off voltage and check the battery capacity.
  • Detect the receiver and the actual operating current to determine whether UBEC, etc..
  • 【BACKLIT LCD SCREEN】Watt meter comes with a 16 * 2 backlit LCD screen, so....
Check Stock

Charge-Discharge Monitor, DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor

  • 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously..
  • APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery.
  • as battery capacity monitor for photovoltaic system.
  • as voltage meter, current meter, power meter, etc..
  • BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging..
  • PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc..
  • automatically/manually switch off LCD screen.
  • with output control button to enable/disable output (requires a relay)..
Check Stock