Kohree RV 125/250V 50 AMP Power Plug Twist Lock Inlet with 3 Stainless Steel Pins and Screws, White

  • 【Safety and Quality with ETL-Rated】Kohree 50 Amp Shore Power Inlet, 3 Poles, 4 Wires, Flanged Inlet, Nonmetallic Inlet. ETL-Rated, use them safely with your friends and family..
  • 【Easy Operation and Installation】Quickly locks the cord set to the inlet without any wiggle or loose. Our rv twist lock plug 50 amp has easy-to-wire terminations inside for easy RV installation..
  • 【Heavy Duty Construction】Each 50 amp camper plug is made of corrosion resistant materials and UV stabilized glass-filled polyester. 3.7""Length X 3 .3Wide X 5.5"" High - Cutout 2.3"" and with 4x 8 Pan Head Stainless Steel Screws..
  • 【Durable and Waterproof】Kohree 50 amp rv plug with twist-lock design and waterproof cover to protect the entrance from weather damage like rain, UV, dust, etc..
  • 【Wide Applications】Great for installation in a trailer camper van boat RV for shore power. A new RV power inlet 50 amp or a replacement plug for an old unit..
Check Stock

Abn Outdoor Marine Electrical Power Male Inlet Socket Box 50A 125/250V w/Connector, Twist Lock Plug Cord Cover, Ring

  • KEEP CORDS SAFE: The ABN Power Cord Inlet, Locking Inlet, and Replaceable Cover Kit installs directly to your application to allow a safe and detachable power connection.
  • Designed to secure and protect your cord connector and keep a weatherproof seal for your RV, camper, trailer, marine watercraft, and other outdoor applications.
  • For regulating and waterproofing purposes.
  • Package includes (1) traditional stainless steel shore power inlet with a gasket cover + (1) plug protector cover + (1) ring.
  • FITS YOUR APPLICATION: 50 Amp, 125/250 Volt white square inlet that quickly locks the cord set to the inlet.
  • Cover includes side grips for an easy and secure connection.
  • Designed for use with round jacketed, hard usage cable (S-type), 8-3AWG.
  • PERFECT SIZE: Inlet – 2.2-inch (5.6cm) inner diameter (ID).
  • 3-inch x 3.5-inch (7.6cm x 8.9cm) outer width.
  • Cover and ring – 2.4-inch (6.1cm) inner diameter (ID).
  • Connector – Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm across).
Check Stock

50 Amp Generator Cord and Power Inlet Box, 15FT Generator Cords 50 Amp,125V/250V Generator Power Cord NEMA14-50P/SS2-50R Twist Lock Connector

  • ...le): NEMA 14-50P, 50-Amps, 125/250-Volts,Cord type: STW 6/3 + 8/1 AWG,Maximum Wattage: 12,500 Watts,Length:15 Feet, Finger grip male plug makes it easier for you to plug and unplug.
  • Receptacle (Female): NEMA SS2-50R, 50-Amps, 125/250-Volts, Twist Locking Style.
  • 【Generator Power Inlet Box 50 Amp】 50A Generator Cord Inlet Box, 125/250V, 12500W, designed for all 50 amp NEMA SS2-50 generator cord, 4-8 AWG Wire Supported in Max. It’s one great partner for generator to be installed outdoors in an open area, providing and maintaining continuing backup power supply, especially when short of power, terrible weather.
  • 【ETL Listed】Our Generator Cord and Power Inlet Box has passed the certification of ETL.Our PB50 power inlet box and Generator cords 50 amp is also one good choice for the generator 50Amp 12500W.It is high quality with the features of wind-proof, rain-proof. You can accommodate our generator cord to use with inlet box to match your generator.
  • 【Widely Application】Perfectly suitable for camping, tailgating, outdoor and sporting in spite of hurricane season and other bad weathers.
Check Stock

50 Amp Generator Cord and Power Inlet Box, 15FT Generator Cords 50 Amp,125V/250V Generator Power Cord NEMA14-50P/SS2-50R Twist Lock Connector

  • ...le): NEMA 14-50P, 50-Amps, 125/250-Volts,Cord type: STW 6/3 + 8/1 AWG,Maximum Wattage: 12,500 Watts,Length:15 Feet, Finger grip male plug makes it easier for you to plug and unplug.
  • Receptacle (Female): NEMA SS2-50R, 50-Amps, 125/250-Volts, Twist Locking Style.
  • 【Generator Power Inlet Box 50 Amp】 50A Generator Cord Inlet Box, 125/250V, 12500W, designed for all 50 amp NEMA SS2-50 generator cord, 4-8 AWG Wire Supported in Max. It’s one great partner for generator to be installed outdoors in an open area, providing and maintaining continuing backup power supply, especially when short of power, terrible weather.
  • 【ETL Listed】Our Generator Cord and Power Inlet Box has passed the certification of ETL.Our PB50 power inlet box and Generator cords 50 amp is also one good choice for the generator 50Amp 12500W.It is high quality with the features of wind-proof, rain-proof. You can accommodate our generator cord to use with inlet box to match your generator.
  • 【Widely Application】Perfectly suitable for camping, tailgating, outdoor and sporting in spite of hurricane season and other bad weathers.
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires suitable for No. 12-3 through No. 18-3 cords grip..
Check Stock

Jamgoer 50 AMP RV Power Inlet Plug 125/250V Receptacle Box Twist Lock Inlet with 3 Stainless Steel Pins Outdoor Electrical Receptacle with Waterproof Dustproof Cover for Marine Boatectrical Extension

  • →[Material]: Our housing is made from the highest grade polymer and terminals are made of rust free metal.Corrosion resistant materials and perfect for waterproof and dustproof..
  • →[Safe Guarantee]: 50 Amp 125/250 Volt easy power inlet, NEMA SS2-50P, ETL Approved, safe to use. Size: 3.7"Length X 3 .3Wide X 5.5" high - Cutout 2.5".
  • →[Funciton]:Easy Lock System, quickly locks the cord set to the inlet without any wiggle or loose, easy to use. Convenient cover design remains open ,4-way right angle rear safety enclosure..
  • →[Warning]: The inlet is not to be connected to power prior to installation. Failure to comply with this instruction could result in an electrical failure, fire and electrocution..
  • →[Widely Compatible]: Use with generator transfer switch or rv shore power inlet plug to energize your electrical devices. Widely application in trailer, camper, RV, car, boat, marine, home, business Inlet..
Check Stock

ParkPower by Marinco 150BBI.RV 15A 20A 30A & 50A Power Inlets Black

  • 15 Amp 125 Volt power inlet is designed to provide an option to upgrade or replace worn power inlet connections on boats, RVs, small towables and....
  • Use with any standard 15 Amp extension cord.
Check Stock

ParkPower by Marinco 200BBI.RV 15A, 20A, 30A & 50A Power Inlets, Black

  • 20 Amp 125 Volt power inlet is designed to provide an option to upgrade or replace worn power inlet connections on boats, RVs, cabins or towables.
  • Use with any standard 20 Amp extension cord.
Check Stock

AP Exhaust 301200S Glasspack Muffler

  • Heavy gauge shell for maximum durability.
  • Expandable bushings for custom applications, Available stainless steel or painted.
  • Continuous Roving Fiberglass for powerful tone and long life, Straight through design for maximum flow and power.
  • Muffler Body Height: 3.5", Muffler Body Length: 26", Muffler Body Width: 3.5" , Muffler Body Material - Aluminized, Muffler Inlet Configuration -....
  • Muffler Inlet Connection Type: Pipe Connection, Muffler Inlet Diameter: 2.25", Muffler Inlet Diameter Designation: Inside Diameter , Muffler Overall....
Check Stock