Reviews Power Inductors

CT Sounds AT-60.4AB 420 Watt Class AB Competition 4 Channel Car Amplifier

Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.

... JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Dr....

Input voltage range: DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted.).
Output: 1.25V to 30V DC voltage is continuously adjustable, high efficiency and maximum output current of 3A..
High-Q inductors with high power output LED indicator.

It integrates high performance IRS2092 supporting dual channel audio amplification. Both of channels.
Both of channels are capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifier enthusiasts or hobbyists to finish a complete amplifier system..
high performance inductors are used to gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc..
Applications: Home theater receiver Car audio Background music systems Musical instrument amplifiers Prototype for recording studios, Post-production, Live sound and Hi-Fi applications PA system.

❤️Duplexer :MX72N duplexer is a series of inductors and capacitors used as bandpass filters.Used for different frequencies and cannot be sent at the same time..
❤️After-sales service: We provide a 12-month product warranty and a 30-day money-back guarantee. If you have any questions or concerns, please contact us. Our professional and reliable customer service will do our best and provide you with satisfactory solutions within 24 hours, please rest assured to buy..
❤️ Two different ways：MX72N duplexer can be used in two different ways..
❤️Working principle: Combine the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..

【Isolating capacitance】: isolating dc to prevent dc voltage from leaking to subsequent circuits or test instruments.
【Firmly Structure】 consists of high frequency inductors and capacitors with ultra-broadband, near idealization and no resonant point..
【Application】: Broadband amplifier, optical fiber communication, optical modulation drive, other test and measurement applications.
【High frequency inductance】: isolate ac information to prevent high frequency signals from leaking into the power supply system..
【Size】Working frequency: 10MHZ-6GHz--Insertion loss 003c 1.2 dB--Operating Voltage: DC1-50V--Normal working current: 003c 0.5A.

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.