Reviews Power Inductor

Strobe Receiver

Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..

...rotatable solar panels, LANSOW solar lights outdoor save more energy and convert up to 20% of sunlight to electric power. Its large battery capacity makes the illumination last longer than other similar products. A full charge requires up to 8 hours of sunlight in mounting location..
【Upgraded Sensitive PIR Motion Inductor:】With sensitive PIR motion inductor, LANSOW solar wall light is able to detect motion up to 3-5m(10-17ft), covering the area of 120 degree wild angle.It can be a outdoor security light to alert you when someone gets close, and better secure your property. The 16.4ft long cable allows you to install the solar panel to outdoor sunny place and put the light panel indoors for house lighting..
【3 adjustable lighting modes:】Unlike other single-mode solar light, LANSOW solar flood lights have 3 lighting mode to meet varioius environment use. ①Motion sensor Mode: Motion sensor automatically turns the lights on when it detects motion and off after 20 seconds without motion detected.
②Dim light sensor mode: Dim light stays on at light and gets brighter when motion detected.
③Constant medium light mode: Stays on with medium light for 6 continuous hours with or without motion detection..
【IP 65 Waterproof& Easy Installtion:】Made....

【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
【Feature】 this Choke Inductor Has Special Guide Pin Structure.
Not easy to produce open circuit phenomenon..
【Specification】 1uh to 220uh 1MH to 20MH.
The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.

The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D * Not included).
MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through)..
An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station..

Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..

【Parameters】- Outer diameter: 16mm/0.63".
【Features】- The electrical characteristics of an inductor are the opposite of capacitors, "passing low frequencies and blocking high frequencies." The resistance to direct current is almost zero.
【Advantage】- The inductance coil has stable performance and long service life, which is an ideal choice for your work.
【Application】- Widely used in supply circuits, miniature TVs, adapters, DC-DC step-up / step-down power modules, various electronic products, etc.
【Package Content】-10Pcs x Inductance Coil.

【Parameters】- Outer diameter: 10mm/0.39".
【Features】- The electrical characteristics of an inductor are the opposite of capacitors, "passing low frequencies and blocking high frequencies." The resistance to direct current is almost zero.
【Advantage】- The inductance coil has stable performance and long service life, which is an ideal choice for your work.
【Application】- Widely used in supply circuits, miniature TVs, adapters, DC-DC step-up / step-down power modules, various electronic products, etc.
【Package Content】-2Pcs x Inductance Coil.

New! Redesigned for lower noise, better sensitivity and lower power consumption..
Design changes include RF-suitable 3.3v power supply with 1/10th of the noise of other SDRs, shielded power inductor for improved EMI rejection, and....
A male MCX to female SMA adapter and strong magentic antenna mount included as standard..
R820T2 tuner provides substantial performance improvements over R820T-based devices.

EMULATES THE ORIGINAL FUNKY 80s WAH - The Dunlop GCB95 Cry Baby Standard Wah Pedal uses the legendary Fasel Inductor to produce a high-end and aggressive wah-wah effect similar to Hendrix's guitars..
PRODUCES QUICK WAH-WAH SOUNDS - The 100 kOhm Hot Potz potentiometer allows the pedal to create abrupt rapid wah effects that are perfect for solo performances..
AVOIDS DISTORTION IN YOUR TONES - The high impedance of GCB95 ensures the original guitar tone does not sound distorted..
OFFERS 2 POWER SOURCE OPTIONS - You can run GCB95 with a 9V battery (not included) when playing outdoors where there are no available wall outlets. A 9V AC adapter can also power the pedal..
INCLUDES - Dunlop GCB95 Cry Baby Standard Wah Pedal. Blucoil Power Supply with Slim AC/DC Adapter for 9 Volt DC 670mA with US Plug (Center Negative Polarity). 4-Pack of Blucoil Celluloid Guitar Picks with 0.71mm Gauge (Assorted Colors)..