Reviews Post Brackets

6 PCS Deck Joist Tie, Steel Z Bracket Tie Plate Fit 2x4 Cross Joist and 4x4 Post , 14 Gauge Metal Joint Corner Brace Support Pergola Brackets for Roofing Trusses Wood Timber Connectors

  • 6 PCS Z Brackets Deck Joist Tie Plate, Carbon Steel + Hot Dip Galvanized.
  • Fit minimum 2"x4" joist and 4"x4" post.Applicable beam thickness: 1½-1⅝ inches (38-40mm).
  • Length: 3¼"(82 mm), Height: 1½"(38 mm), Width: 3"(76 mm), Thickness: 14 Gauge (2 mm).
  • Mounting Holes Size: Φ4mm,Φ13mm,Φ10.5 mm.
  • Pergola Brackets Post to Beam Connectors. Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs..
Check Stock

12 Pack Simpson Strong Tie CBSQ44-SDS2 4x4 Post Standoff Column Base w/SDS Screws

  • 【MATERIAL & SIZE】-Inner actual size: 3.58 x 3.58 Inches (post body is 2mm thickness, and post base bottom is 3mm thickness), it's made from 13 gauge steel, galvanise & matte powder-coat with anti-rust,6-pack included..
  • 【STURDY & STABLE】-Double Layers painting coat to avoid the post base get rust and corrosion, we will galvanise first, and then paint with matte black powder coated, make it sturdy and abrasion resistant..
  • 【INSTALL ACCESSORIES INLUDED】-24pcs expansion bolts + 24pcs self-tapping screws + 48pcs small screws were included. Please note expansion bolts were using for concrete, and self-tapping screw is for wood..
  • 【EASY TO INSTALL】-Please note the post bracket inner actual size is 3.58 x 3.58'', so when you install the wood post, make sure the wood dried at all, and if the wood base is larger than the post base, then please try to sand and trim it, so it can fit with each other perfectly.
  • 【WIDELY USE】-The fence post anchor can be used for many places, decking handrails, pergolas, signs, mailboxes, & garden fences,deck brackets.It would help your fences look sturdy and durable while avoiding breakages..
Check Stock

Lovely Snail A-Frame Bracket Swing Set Heavy Duty Steel Brackets with Mounting Hardware 1 Pack Green

  • HEAVY DUTY STEEL BRACKETS: Made of heavy gauge steel and powder coated for protection against rust and decay, these A-frame brackets are the strongest brackets to build a swing set..
  • TREATED LUMBER NEEDED: 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Measure the lumber before purchasing to ensure it meets our specifications..
  • EASY TO MOUNT: Insert the 4x6 top wood beam into bracket and use 1/4" pilot drill bit to drill holes. Then slide side the 4x4 legs into bracket, install lag bolts and washers, finally tighten with socket wrench..
  • WHAT YOU GET: 1 swing set bracket ,14pcs screws and 14pcs washers. This frame brackets included all hardware required to install them. ONE PACK!.
  • BUY WITH CONFIDENCE: Keeping you satisfied and providing you with the friendliest customer service is our number one goal. Contact us anytime if you have any questions..
Check Stock

Grehitk Pergola Kit, Pergola Brackets 3-Way Right Angle Corner Bracket Woodworks DIY Post Base Kit, Wooden Beams for Gazebos, Patio Pergolas, Log Cabin Outdoor Pergola Hardware for 4x4 Lumber

  • Upgrage 3-Way Right Corner Brackets: Our Grehitk pergola brackets are extended 3-Way right angle corner bracket. It has enhanced the stability of the pergola, even in inclement weather. The 4x4 pergola brackets post features weather-proof performance and a stable frame, so you do not have to worry about the attack and damage to storms and wind..
  • Superior Quality Materials: The pergola kit steel brackets is made of thickened plate steel structural ,the 0.1" thickening plate makes the pergola brackets boot breakage-proof and deformation-proof, which can effectively extend the service life of the pergola kit steel brackets. You can build a stable pergola for a family gathering with such premium material brackets..
  • Easy to Install: This pergola kit brackets Includes (8) steel brackets and all the necessary hardware. Simply cut the wood to your desired length and assemble.Pergola Bracket Shoulders and all the necessary lag bolts cotains 16x Expansion Bolt and 128 x Hexagon Screws are supplied,accommodates 4" x 4" lumber.The actual measure is 3.5” x 3.5”.
  • Wide Application: Extension pergola bracket is commonly ....
Check Stock

4\ x 4\ White Traditional Vinyl Post Skirt | Vinyl Post Trim | Two-Piece | Will NOT Fit A Traditional 4x4 Wood Post(Single Pack)

  • Easy to Install: 12/13 GA. Steel fence post base allows for easy installation of 4 x 4 (nominal) wood posts onto existing concrete or other hard surface..
  • Multi- Purpose Design: The base is made from 2.5mm thick steel and does not require digging. You simply attach it to the surface and screw in the wood post. Base design is perfect for deck supports, porch railing, handrails and post holders. It can also be used as table leg and mailbox post support brackets..
  • Sturdy and Durable: Make repairing or upgrading your fence easy and affordable by using your strong and secure black powder-coated steel constructed fence post base..
  • Comes with a Corner Level: Included in this offer is this foldable L-shaped sturdy plastic pipe and post corner level which has dimensions of 5.3" x 7.5"..
  • For 4 x4 Post: The DoMerch square box of the fence post base measures 3 5/8" x 3 5/8" to accept a 4 x 4 (nominal measurement) support timber . The height of the box is 5 1/2" and the entire base, left to right, measures 6 5/8 " for added strength and stability..
Check Stock

DoMerch 4x4 Wood Fence Post Anchor Base (Actual dim. 3 5/8\ x 3 5/8\) - 12/13 GA Thick Black Steel Bracket - with Foldable L-Shaped Pipe/Post Corner Level - Easy Installation of Posts into Concrete

  • Sturdy Post Base: The size of the 10 PCS adjustable post anchor is 6.02 x 3.62 x 2.64". The post mender is made of 2 mm steel with a fiber varnish on the surface, keeping the decking post base from corrosion..
  • Use For 4" X 6" Post: The cement post base is suitable for 4" x 6" posts. The standard size can ensure that the post base for concrete will not sway. Besides, it can providerust-proof conservation and hardware surface..
  • Easy To Assemble: It's easy to assemble the post base concrete and convenient to use. You can install the post base bracket only by fastening the screws. It's effortless and labor-saving..
  • Complete Accessories: All the needed screws, wrenches, and a screwdriver are included in the accessories. You only need to assemble the standoff base on the wooden deck or concrete floor..
  • Extensive Applications: We can install the post support base bracket on the wooden deck to make it more secure, or some other goods, such as deck brackets, porch railings, post holders, table legs, etc..
Check Stock

SPACEEUP 4×4 Post Base 5 Pcs, Inner Size 3.6'x3.6' Post Base Brackets, Heavy Duty Powder-Coated Post Anchor Matte Black Wood Post Brackets for Pavilion Deck Railing Support Deck Base Plate

  • FIRM AND STEADY---Item size: 6.4 x 3.6 x 5.4"(LxWxH).
  • The post base is made of 2.0 mm thick steel, plated with black powder. It can prevent the post anchor from rusting, which is stable enough to support the bottom of the post and improve its service life..
  • 4x4 POST BASE---Inner diameter of the post bracket is 3.6 x 3.6 inches. The post base is used for 4x4 wood posts (actual 3.5"x 3.5" dry post on market). Attention: Before you buy it, please confirm the size of wood post..
  • EASY TO INSTALL---Concise manual is offered. Each post base bracket has eight holes on the body and four holes on the bottom. You can easily use the bolts and screws we provided to install the 4x4 brackets in concrete with 0. 5" diameter anchors..
  • ADEQUATE ACCESSORIES---A wrench, 20 x 3/8 Expansion Bolt and 40 x Self-tapping Screws are supplied. They are enough to fix the post base. So you do not need to buy other accessories..
  • APPLICABLE SCENARIOS---Our post bases are specially designed for porches, pavilions, decks, mailboxes, fences and railings, etc. Their solid quality can do what they can do..
Check Stock

Myard 4x4 (Actual 3.5x3.5) Inches Aluminum Deck Post Base Cover Flange with Screws for Decking Patio Railing Handrail Fence Anchor (Qty 1, Black)

  • ▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼ Sanding / trimming on wood posts might be required if size error. ★ POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★.
  • ▼ Perfect for deck posts, porch, baluster / cable railings, hand rails, pergolas, pavilion, cabin. Also, can be used as table leg / mailbox post support brackets. ▼ Reinforced corners ribs. No worries of edge-breaking and bending..
  • ▼ Made of premium die-casting aluminum # ADC12 + powder-coated with AAMA-2604 compliant material (Five times the outdoor exposure and twice the humidity exposure as AAMA-2603). UV-resistant, rust-proof and durable..
  • ▼ Stainless Steel screws (Hardness class #12.9 + Dacromet black coating) are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board. ▼ Thickened walls & pads on bottom for better structural strength on decks..
  • ▼ Clean contemporary style. Re-designed for unique looking. Fast & easy post installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match looking. (search "PNP 115445" and "PNP111902").
Check Stock

Contractor Deck Railing 8ft x 36in Aluminum Residential Railing - White

  • Madden Industries Premium Deck Railing - Easy Assembly Instructions Included, Easily Cuts to Size (height and width), Level Installation Brackets Included..
  • Maintenance Free, All Aluminum Construction - Industrial Grade Powder Coat Finish - 25 Year Finish Warranty.
  • Use with Your Existing Posts, or Use Our Color Matched Post Model# CHPRW.
  • IBC & IRC Compliant for Interior and Exterior Use.
  • Use the railing on stairs or a pivot by adding a set of compound angle brackets, model# CHPMBW. ***Signature Required Delivery***.
Check Stock