Reviews Post Battery Terminal

Schumacher BAF-TTC Zinc-Plated Top Terminal and Post Washer Set

  • TOP TERMINAL REPLACEMENT:  Easily replace your vehicle battery’s top terminals and post washers with high performance sensitivity.
  • ZINC PLATED: Coated in color-coded zinc for easy handling, identification and added durability.
  • EXCELLENT CONDUCTIVITY: Performs 3x faster than other top terminals.
  • INCLUDES WASHERS: Soft felt post washers protect battery when charging.
  • COMPLETE SET: Includes 2 top terminal attachments and 2 washers.
Check Stock

ODO LUCK Modified Spacer Kit for Fanatec Clubsport V3 Pedal Brake Reposition and Clutch Delete,Modification Accessories

  • [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify..
  • [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
  • [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity..
  • [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need..
  • [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal clea....
Check Stock

Ampper Top Post Knife Blade Master Switch, 12V / 24V Battery Disconnect Switch Isolator Power Cut Off for Marine Car Boat RV ATV (Negative)

  • Compatible: used for top post terminal, 15-17 mm cone / tapering battery NEGATIVE post only, DC 12V-24V system, 200A continuous and 600A momentary at DC 12V, on/off 2 position..
  • Convenience: vertical knife blade type, easy to install & simple to use. Lift the knife, then power will cut..
  • Heavy Duty: solid brass made, rust and corrosion resistant, durable made for safety use..
  • Purpose: used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
  • Used for Car, Vehicle, RV and Boat batteries which have a standard 15-17 mm cone top post terminal, also used for electrical equipment..
Check Stock

Battery Jump Post, Briidea Battery Remote Charging Tool Jumper Terminals Relocation Kit Work for UTV ATV Car Trucks RV Tractor Boat

  • MUST TO HAVE TOOL: The battery terminal kit connects the battery to a more accessible area, it will allows you to easily charge your battery or even jump start your vehicle without removing the annoying rear seat.
  • STURDY AND DURABLE: With high quality 4 gauge copper wire 4ft long, good electrical conductivity, stability and corrosion resistance, UL listed. Strong lightweight mounting plate, pre-drilled hole to prevent the possibility of arching against important vehicle hardware.
  • REMOTE BATTERY TERMINAL: Each car batery kit is assembled using the top-quality brass terminal to transmit the maximum power. Equipped with plastic insulation cap*6, easy to identity and prevent crossed cables, waterproof and dustproof, prolong the service life.
  • EASY INSTALLATION: Our battery jump post designs small and compact (the size is smaller than other products), and easy to install in any places where the jumper is convenient for the vehicle. Included accessories: plastic insulation cap and mounting screws.
  • COMPATIBILITY: Compatible with all UTV/ ATV models, car battery jump post also work for....
Check Stock

Kat5 Terminals 8015 Multi-Connection Battery Terminals Top Post for use in Marine Power Sports RV’s Automotive Applications – 5 Gang

  • Universal Positive + Negative Top Post Copper Battery Terminal Set with 2 M8 Nuts Compatible with Many Vehicles.
  • This Battery Terminal Set is Approved on almost 50 different Compatible Models including: Camry Corolla Prius Sienna Tacoma Tundra Sequoia ES GS IS LS....
  • Also This battery connectors are widely compatible with Altima, Maxima, Sentra, Murano, Pathfinder, Quest, Titan, Armada, Versa etc. part #....
  • The battery terminals Are made of Quality Copper, and has galvanized surface, which is rust-proof and durable. Also comes with Red and Black Plastic....
  • This battery terminal connector has positive and negative terminal components.
  • Each battery connector is equipped with an M8 nut for easy....
Check Stock

VOSAREA 4-Terminal 12V Solenoid Relay Heavy Duty Car Refit Solenoid Valve Auto Control Switch Fit for Ford Starter Car Truck SW3 SNL135

  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance, sealing is made of....
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post..
  • Maximizes performance. Made from high-quality materials. Easy installation.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Suitable for AEROSTAR, BRONCO, BOBCAT, BREEZEWAY, CALIENTE, CAPRI, COMET, COMMUTER, COUGAR, CYCLONE,....
Check Stock

Positive 36-inch 3/8” Positive Terminal Battery Replacement Cable, Heavy-Duty 2 AWG 100% Copper, 100mm Accessory Lead, 10mm Copper Lug End and 19mm Top Post Terminal, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 AWG cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s Positive Terminal Cable feature a 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal end with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion and a military grade 19mm lead top post terminal with a 100mm accessory lead..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire top post positive terminal battery cable, a 100mm accessory lead, and a 100% copper 3/8” diameter tinned lug terminal end with heat a shrink protective sleeve..
Check Stock

Aoerzn Premium Battery Terminal Connectors, 2Pcs Quick Release Disconnect Car Battery Cable Terminal, Positive Negative for SAE/JIS Type A Posts, Good Contact, Corrosion Resistance

  • THE AOERZN ADVANTAGE: Join our customer groups, and enjoy more excellent auto parts. Cooperate happily! Note: During installation, it is not recommended to overighten these two screws.Prevent rupture..
  • WIDELY APPLICABLE: Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity. Works great for replacing worn out and corroded terminals..
  • CONVENIENT: This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided hex wrenches make for easy installation. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed. Convenient wiring and firm connection..
  • HIGH-QUALITY: The battery terminals are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss. Fits on round post auto batteries SAE/JIS Type A posts..
  • YOU WILL GET: 2Pcs pure copper battery terminals connectors. 1Pcs Alan wrenches. I believe this product can fully meet your requirements. Welcome guide, high quality assurance and friendly customer service..
Check Stock

Car Battery Terminal Connectors, 2 Pcs 4 Way Quick Release Disconnect Car Battery Terminal for SAE/JIS Type A Posts, Compatible With Cars, Vans, Trucks and More

  • [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify..
  • [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
  • [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity..
  • [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need..
  • [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal cleaning brushes, 2 battery anti-corrosion washers and a hex wrench. Please feel free to let us know if you have any concerns or questions about our products, our customer service team....
Check Stock