Reviews Position Hinge

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Lippert RV Entry Door Friction Hinge Kit for 5th Wheel, Travel Trailer and Motorhome

  • DIY INSTALLATION — Installation is easy and seamless. You don’t even need to remove your door or existing hinges. In no time, your RV’s entry door will be operating smoother than ever with added strength and durability.
  • MORE CONTROL — Similar to a laptop, the Friction Hinge lets you leave your door in the exact position you need — giving you more control and peace of mind opening and closing your door.
  • EASY UPGRADE — With no additional hardware required, the Friction Hinge is an easy, inexpensive way to upgrade your entry door without installing gas struts or continually replacing unattractive door catches that easily break and damage your RV.
  • ADDED PROTECTION — Tested to withstand up to 25mph wind gusts, our hinge keeps your door from slamming shut or flying open — preventing costly damage to your door and RV sidewalls and windows.
  • FIT FOR YOUR DOOR — The Friction Hinge is compatible with all Lippert entry doors and Challenger Door Series 450, 805, 950, 975, and 3000.
Check Stock

MRT SUPPLY 17 Foot Type IA Aluminum Multi Position LT Ladder with Ebook

  • Air craft grade lightweight aluminum ladder provides versatility and stability while you work – Rock Lock system lets you set up in seconds, simply push the lock to release the ladder, then tap to lock – Tip and Glide wheels make transporting from job to job easy.
  • Dual pin hinge and wide flared legs puts you in the safest position to get the job done – Ladder configurations include: A frame, staircase, 90 degrees, extension, and scaffolding – Easy to adjust to multiple heights and can adapt to almost any job – Complies with all applicable OSHA and ANSI A14.2 standards.
  • Specifications: Maximum A frame height: 7 feet 1 inch – Maximum extension height: 17 feet – Maximum scaffolding height: 3 feet – Maximum workbench height: 4 feet – Minimum A frame height: 4 feet 1 inch – Minimum extension height: 9 feet.
  • Palm and hinge system: Triple locking hinge – Spreader system: Hinge lock – Storage depth: 9 inches – Storage height: 4 feet 7 inch – Unique configurations: 24 – Weight capacity: 300 pounds – Ladder weight: 30.5 pounds.
Check Stock

Heavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Parts Wall-to-Glass (Black)

  • ...to be flexible and quiet, enabling 90 degree 2-way opening/closing without any noises. It is sleek and stylish with bright color for better visual comfort, suitable for 1/3inch - 1/2 inch (8-12mm) glasses..
  • glass door hinge shower door hinges Self closing from 25 degrees and self centering to 0 degrees in the closed position,PROTECTIVE & EASY TO INSTALL - The glass cabinet door hinges are equipped with premium rubber to protect your glasses from damages. Quick and easy installation with mounting hardware included at your convenience..
  • Included package:1x hinge,4X screws and expansion bolt, and 1 Allen key.APPLICATION - The glass cabinet door hinges are 4mm thick, durable and strong, fitting for glasses of 1/3-1/2 inch(8-12mm) in thickness. Suitable for smooth opening and closing of glass door, showcase, cupboard and cabinet at 90 degrees.glass door hinge glass door hinge shower glass shower door hinges shower glass door hinges.
  • shower door hinges glass shower door hinges heavy duty glass shower door hinges black glass door hinges shower door hardware.glass shower door hinges shower door hinges wall to glass hinge shower hinges glass door frameless shower door hinges glass door hinges shower glass clamp.
Check Stock

UFURMATE Folding Brackets, 2Pcs Silver Steel Foldable Support Bracket Heavy Duty Self-Locking Hinge Lock Extension Support for Folding Table Legs, Workbench (0-180 Degree)

  • 【Durable Steel Material】The folding hinge is made of high-strength cold rolled steel, which is durable, wear-resistant and not easy to rust..
  • 【Self-locking Hinge】The foldable hinge can be self-locking whether it is opened to 90 degrees or 180 degrees, or closed..
  • 【Unlock Switch】The self-locking hinge comes with an unlock switch, when you need to adjust the board, just press and hold the switch..
  • 【Easy to Install】The hinge has mounting screws, which can be easily fixed. (Note: Before the installation, the hand has no support position, these brackets are difficult to be folded or released, so it can be folded normally after it is installed. ).
  • 【Wide Applicaiotn】Perfect for wood boards with a width not exceeding 30cm, such as furniture table legs, folding wooden bed, Workbench, dining table, DIY platform and other extensive applications, it also can be used as a simple invisible bracket. Note that the maximum load-bearing capacity of a pair of hinges is 30KG/66lbs..
Check Stock

ZUIWAN 2 Pack Heavy Duty Stainless Steel Wall Mount Flat Back Gate Hinges,Outdoor Chain Link Fence Post Gate Hinge with 5/8 Hinge Pin (Screws Not Included)

  • Wall Mount Flat Back Gate Hinges are made of stainless Steel,silver zinc coating to prevent rust and corrosion,It can be placed on the outdoor fence door for a long time.
  • Chain link wood fence post gate hinge wide application,very suitable for barn doors,flat wood fence,fences, square wood post or whatever you think is appropriatee,etc..
  • Wall mount gate hinges dimension :4“(L)*2-1/2”(W)*1-3/5”(H),the size is meticulously design ,great fits most gates.
  • Wood fence link gate hinges easy to install,do not require for professional skills ,only need mark the holes position fix the gate hinge with screws.
  • Package included: 2 pack wall mounted gate Hinge with 5/8 hinge pin, （Notice:screws not included.）.
Check Stock

Suburban 2985A Glass Cover-Slide-in Cooktops and Ranges

  • Provides a stylish, sophisticated look for your RV.
  • Glass cover fits slide-in cooktops and ranges.
  • How to install: remove range top and lift it up, position the hinge brackets over burner box, secure brackets to burner box with included screws. Reinstall the hinge top, unfold the cover and place down on slide-in for use as a cover, counter space or lift up for splash guard.
Check Stock

Sugatsune GHC-34/8/BLK Stainless Steel 304 Half Overlay Glass Door Hinge with Catch, Black Finish, 2mm Leaf Thickness, 64.5mm Open Width, 5.2 mm Pin Diameter, 18mm Knuckle Length, 37mm Height

  • Half overlay glass door hinge with catch.
  • Hinge will hold door in closed position without secondary support.
  • Fits 450-millimeters width by 700-millimeters height door size per pair of hinges.
Check Stock

Southco F6 Series Stainless Steel Concealed Door Removal Hinge, 0.06\ Leaf Thick, 1.87\ Open Width, 0.19\ Pin Diameter, 3.14\ Knuckle Length, 4.96\ Long, 0.67\ E Size, 0.47\ F Size

  • Completely concealed hinges allow for flush exterior surface design, more security and better aesthetics.
  • Metal hinges deliver strength and durability for heavier cabinet door applications.
  • Engineered plastic quick-release hinge provides a lightweight, non-conductive, non-corrosive option with dual hinge points for greater stability.
  • Removable pin designs provide a more economical option for tool-free door removal.
  • Spring-loaded retractable pin designs lock into retracted position for easier door installation/removal, lock into engaged position for secure operation.
Check Stock