Reviews Portable Vise

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Hi-Spec 1 Piece Hobby & Craftwork Mini Table Suction Vise for DIY Repairs, Modelling, Painting, Gluing, Soldering & Crafting

  • ...all, its base suction hold is easily fixed to any surface. With a simple turn of the locking lever, three outside tabs overlap the base edges, and ensure a tight seal as the 2.5mm thick rubber base mat concaves-in to create a mini-vacuum. Weighing a hefty 1.27kg / 2.8lbs and made from die-cast aluminium alloy, this portable mini vise, with its easy to use table fixing, can be used almost anywhere.
  • PROTECT DELICATE PARTS: The vise jaws, with the soft rubber jaw cover pads, open up to 60mm (2-3/8"), and maintain a firm hold on workpieces without risk of damaging or marking them. Ideal for precision metal soldering tasks or delicate crafting projects. Pads are removable to increase the jaws opening for an extra 10mm (3/8") of width.
  • 360° FLEXIBLE HEAD: Using a socket and ball joint, the head can be rotated a full 360° and pivoted 90° so your workpiece is almost totally exposed without having to reposition within the jaws. Simply tighten the locking screw to fix in the ball position.
  • T-BAR TIGHTENING: Jaws are opened and closed using a classic sliding T-bar screw mechanism, made from chrome plated A3 steel, which allows for delicate tightening where required as well as creating high levels of torque for maximum tightness.
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock

COMOWARE 55 Pcs Pin Vise Hand Drill with Micro Drill Bit Set, Precision Jewelry Drill, Hand Drill for Jewelry Making, HSS Micro Drill Bits (0.3-3.0mm), Craft Drill for Resin Polymer Clay Craft DIY

  • ... HSS 4241 and roll forged for proven strength and durability. With sharp cutting edge and 118 degree point tip, these twist drill bits delivers clean drilling performance on precision work..
  • 【FULL SIZE SET】- The 55pcs pin vise hand drill with micro drill bit set includes 1 piece hand drill, 1 pair of tweezers, 1 portable storage case and 52 pieces of micro drill bits in 30 different sizes to satisfy all you demand. (1pc x 0.3mm, 0.35mm, 0.4mm, 0.45mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm.
  • 2pcs x 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • 3pcs x 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm.).
  • 【WIDE APPLICATION】- These mini drill bits are light in weight and compact in size. The multi-purpose craft drill is perfect for drilling small holes on wood, plastic, rubber, polymer clay, PVC, walnut, model, amber, olive nut and other soft materials. Great hobby drill set for your manual work..
  • 【NOT ONLY A DRILL TOOL】- Except for clamping micro drill bits, this pin vise hand drill is also able to clamp iron wire and twist it into any shape you want, making it a perfect hand drill for jewelry making, electronic assembly and other DIY project..
Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

  • The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
  • Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
  • This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..
Check Stock

Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking

  • Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
  • Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
  • Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
  • Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
  • Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock