Reviews Polymer Fuse Cutout

Pyle 6.5” 2-Way Midbass Speakers – Pair of In-Wall/In-Ceiling Woofer Speaker System 1/2” High Compliance Polymer Tweeter Flush Mount Design w/ 60Hz – 20kHz Frequency Response 200 Watts Peak – PDIC66

  • 60Hz – 20kHz FREQUENCY RESPONSE: Pyle, 6.5” speaker system has a 1/2” high compliance polymer tweeter and frequency response. This flush mount speaker is pack with exceptional 8 ohm impedance rating and impressive 200 watts power handling capability.
  • 2-WAY MOUNT SPEAKER: The pair of 6.5” stereo sound speaker has two way of installation. It is made of polypropylene cone with rubber edge and built-in electronic crossover network perfect for custom installations and applications.
  • FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for simple and easy in-wall / in-ceiling installation. The product includes cutout dimension at 7.9” in diameter x 3.1” in depth and changeable round and square stain resistant grills.
  • 200 WATTS PEAK: Pyle in-wall speaker system were carefully combined to reproduce sound clearly with outstanding responsiveness. It can achieve wide-ranged sound performance speakers secure as well as extending the life of the product.
  • 9.5″ x 3.4″ CUTOUT DIMENSION: It has an elegant white look perfect for home or indoor ceiling cabinet enclosure wall. It is secure with a bracket that supports 6.74 lbs. speaker in overall dimension at 9.5″ diameter x 3.4″depth.
Check Stock

Bussmann BK/HKP-HH Panel Mounted Fuse Holder (Pack of 1)

  • 2 kinds of fuse holder with quick blow glass tube fuse, suits for Car Radio Audio DIY project..
  • In-line screw type fuse holder, with 22 AWG wire, suitable for 5x20mm glass fuse..
  • Panel mounted fuse holder, with screw cap and soldering terminals, rated voltage : AC 15A 125V, AC 10A 250V..
  • 10 different value glass fuse assortment, including 20pcs fuse 0.2A, 0.5, 1A, 2A, 3A, 5A, 6A, 8A, 10A, 15A, 10 pcs each value..
  • Package Content: 5 * fuse holder in-line screw type + 5 * panel mounted fuse holder + 100 * quick blow glass tube fuses..
Check Stock

Marine Fuse Block, 12V Fuse Box with LED Warning Indicator Damp-Proof Cover 12 Circuit Independent Positive Negative Fuse Panel with Negative Bus Fuse Box for 12V/24V Vehicle Car Boat Auto (12-Way)

  • ✔️[CONVENIENT INDICATION] When a blown fuse is detected, the associated red LED warning light will immediately illuminate, reminding you to check and replace the blown fuse. The car fuse box will indicate exactly where there is a short circuit or any other fault, and it reminds you to check and replace the blown fuse..
  • ✔️[STRUCTURE] The fuse box is suitable for ATC/ATO (medium size) fuses which have positive and negative terminals, which means that for each positive terminal there is a negative terminal. to keep all wires neat and organized, not a mess of wires and fuse holders stacked on the battery terminals. All bus bars and fuse blocks in the fuse box are nickel-plated copper for corrosion resistance and high conductivity.The marine fuse block is mechanically strong, insulated, heat resistant.
  • ✔️[SUPERIOR MATERIAL] The 12v fuse box is made of environmentally friendly PBT material with a transparent fuse protector insulated cover with a black push-lock system that allows the cover to be easily opened by pressing. In addition, this transparent design also helps to add extra protection to the fuse panel and fuses. The fuse box holder features LED i....
Check Stock

Marine Fuse Block, 12V Fuse Box with LED Warning Indicator Damp-Proof Cover 12 Circuit Independent Positive Negative Fuse Panel with Negative Bus Fuse Box for 12V/24V Vehicle Car Boat Auto (6-Way)

  • ✔️[CONVENIENT INDICATION] When a blown fuse is detected, the associated red LED warning light will immediately illuminate, reminding you to check and replace the blown fuse. The car fuse box will indicate exactly where there is a short circuit or any other fault, and it reminds you to check and replace the blown fuse..
  • ✔️[STRUCTURE] The fuse box is suitable for ATC/ATO (medium size) fuses which have positive and negative terminals, which means that for each positive terminal there is a negative terminal. to keep all wires neat and organized, not a mess of wires and fuse holders stacked on the battery terminals. All bus bars and fuse blocks in the fuse box are nickel-plated copper for corrosion resistance and high conductivity.The marine fuse block is mechanically strong, insulated, heat resistant.
  • ✔️[SUPERIOR MATERIAL] The 12v fuse box is made of environmentally friendly PBT material with a transparent fuse protector insulated cover with a black push-lock system that allows the cover to be easily opened by pressing. In addition, this transparent design also helps to add extra protection to the fuse panel and fuses. The fuse box holder features LED indicators and a sturdy construction. This 12 volt 12-way fuse block meets all the criter....
Check Stock

Fuse Holder, Ardor 4 Gauge or 8 Gauge in-Line AGU Fuse Holder with 1PC 80A AGU Fuse for Car Audio Alarm Amplifier Truck Audio(AR1122N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very practical fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】AGU fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A AGU fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock

Inline Fuse Holder, Ardor 4GA or 8GA in-Line Mini ANL (AFS) Fuse Holder with 1PC 80A Fuse for Car Audio Alarm Amplifier (AR1130N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very worthable fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】Mini ANL (AFS) fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A Mini ANL (AFS) fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock

goDog Buck Tooth Llama Chew Guard Technology Plush Dog Toy, Blue And Tan, Small/2 Count (Pack of 1)

  • MADE TOUGH: Manufactured using thermal-fuse technology to bond durable, non-toxic polymer with extra strong climbing rope, goDog's Rope Tek dog toys are tough and can withstand rough play.
  • FOR INTERACTIVE PLAY: The shape and durable construction make these toys ideal for interactive play with your dog, whether used as a fetch or toss toy, or for playing tug.
  • interactive games are a great way to strengthen the bond between pet and owner.
  • LIGHTWEIGHT: Can be easily stored or packed away for trips to the park, beach, on a camping trip, or for sleepovers with friends or family.
  • it's never been easier provide fun and enrichment to your dog whenever, wherever.
Check Stock

Beaquicy Microwave Fuse 20 Amp 250V Ceramic Fuse Cartridge Fuse Slow-Blow WB27X10388 Replacement for G-E Ken-More Microwave (5-Pack)

  • ✅【20Amp 250V】: The package includes 5 x ceramic slow blow fuse. This microwave fuse shuts down the microwave oven in case of a power surge, preventing the microwave oven from receiving damage during a surge. The fuse has a width of 0.25 inches and a height of 1.16 inches. 20a fuse is made of ceramic and its rated specification is: 20Amp, 250V. Replacing ge microwave fuse solves the FOLLOWING SYMPTOMS: ►Abnormal current, generating heat ►The circuit operate unsafely ►Microwave fuse blown..
  • ✅【5pcs CERAMIC FUSES】:5-Pack 250v 20a fuse microwave is made of durable high quality ceramic. The high quality ceramic material makes 20 amp fuse better able to achieve the effect of power failure. When the current abnormally increases to a certain level and generates heat, it will break, thus protecting the safe operation of the circuit. The since surges do not disappear when the power is disconnected, it is necessary to install this fuse to protect the microwave's electrical panel..
  • ✅【GE/KENMORE MICROWAVES】:The 20Amp Ceramic Cartridge Fuse replaces:875392, AP3994062, PS1481237, EAP1481237, WB27X10928, WB27X10388. COMPATIBLE WITH: JVM2052DN1WW, JVM2052....
Check Stock

YOTINO 12V 24V Standard Add-a-Circuit Fuse Tap, ACU Medium Piggy Back Blade Fuse Holder with Wire Harness, 6 pcs Standard Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4)

  • FITS YOUR VEHICLEATO ATC standard 6.3mm blade fuses and stand up to 20 AMP each slot, suitable for any vehicle with a standard fuse slot.
  • INSTALL APPLICATIONSYOTINO 12v/24v add-a-circuit kit makes your car battery positive so you can hardwire a 12V radio, LED light strip, dash cam, GPS, backup camera or any other small electronic device that requires direct wiring into the fuse box.
  • NO SPLICING REQUIREDAdd devices and accessories to your vehicle with compatible sized fuses without cutting into wires,2 fuse slot providing protection for existing/new circuits, tap the fuse box to power additional electronic devices with no need to cut or splice.
  • EASY INSTALLATION1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. 2. Insert a suitable fuse for the new accessory in to the top slot. 3. Crimp your new live wire to the butt terminal on the fuse tap.
  • PACKAGE CONTENT4 pack fuse holder kit, 1 pcs fuse puller and 6 pcs standard fuse (3A 5A 7.5A 10A 15A 20A)total 19 pcs accessories referring picture 1.
Check Stock