Reviews Polyimide Acrylic Tape

2 Rolls Heat Tapes Heat Transfer Tape Sublimation Heat Resistant Temperature Tape for Electronics Printing DIY Crafts on T-Shirt Fabrics (Clear,30 mm Wide)

  • ...with a high temperature resistant adhesive, enough quantity will satisfy your different needs.
  • Appropriate dimension: each heat tape has suitable size in width and length, and the thickness is about 0.05 mm, suitable size for you to use, you can buy with your confidence.
  • Easy to use: the heat transfer tape is made of polyimide film with adhesive, it is easy to stick and not easy to break while peeling.
  • It can work well in coffee mug press, heat press, T-shirt application or other thermal transfer printing.
  • Multiple functions: the heat resistance of heat transfer tape is up to 220 Celsius degree, which can work well in protecting electronic products, electric motor, solder, as well as painting, packing fixing, printing board the heat tape for heat press is not only suitable for sublimation on coffee cups, but also suitable for heat transfer vinyl on T-shirts, pillows, clothing, fabrics, and also can be applied for most kinds of DIY projects.
  • Tips:The product can withstand a high temperature of 220 Celsius degree, and it takes about 10 seconds during the thermal transfer process. Over time, it may leave a mark. If you leave a mark during use, don't panic, just wipe it with Fengyoujing, banana water, and alcohol to remove the remaining mark.
Check Stock

3 Pack High Temp Tapes - Viaky 20mmx65.6ft Heat High Temperature Resistant Sublimation Tape, Polyimide Film Self Adhesive Tawny Tape for Electric Task, 3D Printers, Solder, Painting and Packing Fixing

  • 【Package Include】3 Pack high temp tapes in tawny color. Tape width 20mm(0.8in), length 20m(65.6ft)..
  • 【Good Quality】This high temp tape made of polyimide, the surface of polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range..
  • 【Easy To Use】Approx heat resistance: long-term temperature resistance 250°C/482°F, short-term temperature resistance 280°C/536°F, strong self-adhesive is easy to stick, no residue after peeling..
  • 【High Performance】The high temp tape is superior resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion..
  • 【Multi-Uses】Perfect for all of your needs including masking circuit boards, soldering ,electrical insulation and splicing wires. It is also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry and more..
Check Stock

Bertech High Temperature Tape, 1 Mil Thick, 1 Inch Wide x 36 Yards Long, Polyimide Film with Silicone Adhesive, 500°F Resistance, High Temp Resistant Polyimide Tape for Masking, Soldering and PCB

  • HIGH TEMPERATURE ENDURANCE: Reliable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures of -73°C (-100°F) to 260°C (500°F).
  • DURABLE MATERIAL: RoHS- and REACH-compliant tape is made using a soft coating of polyimide film with a silicone adhesive that leaves no residue.
  • MULTI-PURPOSE: Used in a range of industries including aerospace, automotive, consumer electronics, industrial, solar photovoltaic, and wind energy applications.
  • DIMENSIONS: 1-inch-wide and 36-yard-long tape has a 1-mil-thick film and 1.5-mil-thick adhesive.
  • SAFETY COMES FIRST: Bertech is a leading source of Electrostatic Discharge Products (ESD), Kapton Tapes, and Finger Cots.
  • we also produce customized kits to meet our customers' specific requirements.
Check Stock

Icstation 12V 12W Flexible Polyimide Heater Plate Adhesive PI Heating Film 10mmx93mm

  • 【Warm tips】These new heater films are going to supply in pack of 4pcs, but very sorry that we mixed with some independent Packing. If you purchase 4pcs but only get 1pc, please contact with service team freely, we will resend to you for free or refund as a compensation as per your request. The rest inventory is on sale, until new packages restock. Thanks a million for your kindly understanding!.
  • Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process..
  • Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments.
  • Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
  • Equipped with self adhesive can be fixed on the item surface easily. Working Voltage: DC 12V, Power: 12W, Film Size: 93 X 10mm/3.66 X 0.39inch(L*W), Maximum Temperature: about 170℃ Ship out by USPS with tracking information and 7-15 days delivery time usually.
Check Stock

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

3M 3361 Silver High Temperature Stainless Steel/Acrylic Adhesive Foil Tape, 3\ width x 3yd length (1 roll)

  • Permanent Tape: crafted with precision, this stainless steel tape with non-magnetic properties is ideal for marine, food processing, and nuclear applications.
  • Heavy-Duty Tape: due to its aggressive acrylic adhesive system, this safety tape creates a permanent bond on metals and other high surface energy materials. Acrylic adhesive tape performs well over a wide temperature range.
  • Foil Tape: resistant to corrosion, this foil tape can be used for sealing and protecting stainless steel surfaces. With its ability to resist chemicals, this acrylic tape can also be used in electroplating or to increase the thickness of surfaces.
  • Usability: this silver tape adheres well with reinforced fiberglass and mineral-wood thermal insulation. Suitable for low temperatures and high humidity, it is ideal for sealing hot and cold air ducts.
  • Specifications: the tape roll measures 3 in. in width, 9 ft. in length, and is 0.0038 in. thick.
Check Stock

3M VHB Tape RP32 0.5 in width x 5 yd length (1 Roll)

  • Bonding Tape: heavy-duty tape eliminates drilling, grinding, welding, screwing, and refinishing associated with bonding and sealing materials. Clear acrylic construction of the tape makes it perfect for joining transparent materials.
  • Acrylic Tape: permanent bonding tape with an exceptional strength can be used to replace rivets, screws, spot welds, and messy liquid adhesives. Continuous bonding feature distributes the stress over the entire surface for best results.
  • Utility: 3M clear tape is ideal for heavy bonding applications such as bonding glass and door, creating street signs, etc. This adhesive tape covers rivet heads, weld marks, and glass cracks, leaving negligible trace and creating a smooth surface.
  • Durability: the clear acrylic tape is resistant to UV light, moisture, solvents, and chemicals, ensuring perfect sealing and bonding even in extreme environments. It also resists high-range, hot and cold temperature cycling.
  • Dimensions: 0.040 in. thick, 6 in. wide and 15 ft. long double-sided tape roll with pressure sensitive adhesive bonds almost instantly with no drying time.
Check Stock

3M 4412N Sealant Tape, 1" width x 5yd length (1 roll)

  • Acrylic Tape: translucent tape with ionomer backing and thick acrylic adhesive is the ideal watertight sealing solution. It creates and maintains an effective sealing over existing joints, seams, or penetrations with almost no curing time.
  • Conformable Tape: sealing tape is highly conformable, creating a contouring seal over edges, rivets, and screw heads. It helps to create roof-to-trim type of comprehensive sealing and eliminates the need for liquid sealants.
  • High Durability: acrylic adhesive tape is resistant to moisture, high-pressure water, and thermal shocks — a sensible pick for sealing applications in outdoor areas that are constantly exposed to water, humidity, or high temperatures.
  • Utility Range: use the pressure sensitive tape to seal downspouts and window vents. This tough yet flexible abrasion resistant tape can also be used to patch RV roofs, trailers, commercial containers, and metal enclosures.
  • Specifications: outdoor sealing tape with 0.080 in. thickness is 1 in. wide and 15 ft. long. This easy-to-apply tape creates a paintable top surface. It finds some use in painting, wall-preparation applications.
Check Stock

3M 3361 Silver High-Temperature Stainless Steel Tape - 2 in. x 9 ft. Non Magnetic Acrylic Adhesive Foil Tape. Safety Tapes

  • Permanent Bonding Tape: crafted with precision, this stainless steel tape with non-magnetic properties is ideal for marine, food processing, and nuclear applications.
  • Heavy-Duty Tape: due to its aggressive acrylic adhesive system, this safety tape creates a permanent bond on metals and other high surface energy materials. Acrylic adhesive tape performs well over a wide temperature range.
  • Foil Tape: resistant to corrosion, this foil tape can be used for sealing and protecting stainless steel surfaces. With its ability to resist chemicals, this acrylic tape can also be used in electroplating or to increase the thickness of surfaces.
  • Usability: this silver tape adheres well with reinforced fiberglass and mineral-wood thermal insulation. Suitable for low temperatures and high humidity, it is ideal for sealing hot and cold air ducts.
  • Specifications: the tape roll measures 2 in. in width, 9 ft. in length, and is 0.038 in. thick.
Check Stock