Reviews Poe Pd Module

16 Port PoE Switch, 16 PoE+ 100Mbps Ports with 2 Gigabit Uplink Ethernet Ports, 1 Cambo SFP, Unmanaged Plug and Play, Each Port Up to 30W, High Power Total Budget 300W, 803.af/at Compliant, Rack Mount

  • 【PLUG AND PLAY】16 x 10/100Mbps PoE ports and 2 gigabit ethernet uplink ports and 1 SFP port unmanaged PoE switch, easy setup with no software installation or configuration needed. Does not have IP address or web interface..
  • 【HIGH PERFORMANCE】 Compliant with IEEE 802.3af/at Network protocol standard, supports PoE power up to 30W for each PoE port(Total of 300W PoE power budget).Compact & Sturdy Metal Housing design makes it safe to use in various environments.
  • 【STANDARD POE SWITCH】PD Detection, Automatically detect and provide required power for your PoE devices and protect your non-PoE equipment from being damaged. PoE Extension data transmission up to 600ft long distance if needed (Transmission Speed will be reduced to 10Mbps if extend function is operating, must use high quality cable).
  • 【Sturdy Metal Case】Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
  • Note: Do not support passive 24V PoE device E.g. ubiquiti access point.
Check Stock

Cisco SG250-08HP Smart Switch | 8 Gigabit Ethernet GbE Ports | 45W PoE | Limited Lifetime Protection SG250-08HP-K9-NA

  • ETHERNET PORT CONFIGURATION: 8-port 10/100/1000.
  • POWER OVER ETHERNET: 8 PoE ports with 45W total power budget, PoE, PoE plus, PoE PD/PSE port.
  • CONFIGURATION AND CONTROL: Easy-to-use on-box WebUI, CLI offers basic plus capabilities, SNMP, Cisco FindIT Network Manager, PnP, auto-discovery,....
  • L2 plus FEATURES AND SECURITY: Static routing, VLANs, QoS, Voice VLAN, MSTP, IGMP Snooping Access Control List (ACL), 802. 1X, DoS prevention, SSH/SSL.
  • PEACE OF MIND: Limited lifetime , one year of technical support, and free software fixes for the term of the.
Check Stock

BV-Tech 5 Port PoE+ Switch (4 PoE+ Ports | 1 Uplink Port) – 65W – 802.3af/at – POE-SW501

  • 4 PoE+ Ports and 1 Uplink Port at 10/100Mbps each.
  • 65W Max Power (up to 30W per port) | IEEE 802.3af/at.
  • PD (Power Detection) will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • Compact Design with Internal Power Supply.
  • Lifetime Tech Support and 1 Year US-Based Warranty.
Check Stock

JacobsParts USB C PD DC Voltage Trigger Test Module 9V 12V 20V Adjustable Power 5A 100W E-Mark Type-C

  • Power all kinds of electronic devices with USB-C PD chargers and power banks • Test power supply capabilities.
  • Performs real PD power negotiation • Supports up to 5A / 100W • Has the e-Mark chip necessary to unlock 5A output on 100W power supplies.
  • Trigger 5V, 9V, 12V, 15V, or 20V output (not all USB-C power supplies support all voltages) • The module just performs the PD negotiation and passes the output.
  • LED voltage indicators • Retains setting after power loss.
  • Power supply must be connected to the male end of the module.
Check Stock

Netis P110C 8 POE+2 Uplink 100M Standard Fast Ethernet POE/ POE+ Switch with Plug and Play | IEEE 802.3at/af Compliant Powered Devices (PDs) with Auto MDI/MDIX Function | POE Power Budget of 120 W

  • 8 x 10/ Auto-Negotiation RJ45 ports with Poe function(Port 1-4).
  • Supports Poe power up to 15. 4W for each Poe port, 62W for all Poe ports.
  • Supports Poe IEEE 802. 3af compliant Powered Device (PD).
  • Supports 1K MAC address table, MAC address auto-learning & auto-aging.
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
  • 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check Stock

StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)

  • 2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
  • POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
  • MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
  • TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
  • VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock